pressure tank Germany

... threads, a butterfly valve, and a solenoid valve. Additionally, the fermentation tank has Tri-Clamp connections for CO2, a yeast discharge, a clear drain, as well as an insulated, cooled cone with an angle of inclination of 72 degrees. An integrated CIP ball allows for 360° spraying. The working pressure is limited to a maximum of 2.2 bar and is regulated by a pressure relief valve and a vacuum valve. Furthermore, a pressure relief device and a hop dosing chamber for dry hopping are integrated. The connections can be executed as either Tri-Clamp or milk pipe fittings.

... volume max. 15 cm³ Frequency up to 10 Hz Pressure change as sine & trapezoidal wave (depending on the expansion volume) Safety test chamber with automatic door Media preparation with dirt & clean tank Feeder for pressure change testing Complete electrical equipment for pressure tests Hydraulic unit with Moog RKP and 55 kW Temperature range: -55°C…+160°C (without climate) Temperature change rate...

... Draining small towns with up to about 3700 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems Two...

... 2250","pressure tests":"Pressure tests","suitable accessories available":"Suitable accessories available","OEM quality":"OEM quality","Examination according to R34":"Examination according to R34","According to customer requirements":"According to customer requirements"}...

...Short pipelines from the tank to the evaporator and from the evaporator to the system Custom design and consultation for the right pipelines and pressure regulators tailored to your business...

... (L x Ø in mm): 928 x 85 Flange distance: 810 mm Weight: 5.5 kg Lamp service life: 8,000 h Dose: 400 J/m² Max. operating pressure: 10 bar Enclosure protection class: IP 65 electrical connection: 110-240 V 50/60 Hz Power: 106 W Fuse: 10 A...

...disinfectants Cleaning process: High pressure - interior and exterior cleaning, caustic - interior and exterior rinsing, interior disinfection, exterior clear rinsing. Special equipment: Round conveyor with fully automatic container centering Heating: Saturated steam Installation area: Washing system L x W x H = 12250 x 8500 x 5000 mm. Tank system L x W x H = 6000 x 4000 x 2900 mm...

...As end-of-line armature, for venting apertures on tank installations. Used mainly as venting and breather device for fixed roof tanks. Used to prevent inadmissible pressure and vacuum and to minimize unwelcome gas losses or inadmissible emissions respectively. The housing is mounted perpendicularly on a tank roof.

...NITTEL beer tank inner liners are made from specially designed plastic films for the storage of beer. They are tailored to withstand the extreme temperature conditions and pressure conditions in the storage tank.

... arrangement ACCESSORIES on demand level indicators condensate drainage systems sump heating GENERAL & FUNCTION The condensate tank type VKAB collects liquids and condensates, which are generated during the cleaning of gas in liquid separators. The condensates are discharged from the separators into the tank and serve for pressureless intermediate storage. The design is carried out as a steel welded construction in a horizontal design and is designed as a pressure vessel with 3 bar. QUALITY MANAGEMENT DIN EN ISO 9001 certified...

...e.g. gas humidifier, gas heater, storage tank, heat exchanger...

... 9010 White, removable Operating pressure: max. 10 bar Temperature: max. 95 °C Equipment: Magnesium anode, inspection opening depending on model design with flange or 1 1/2 inch female thread, height-adjustable feet, analog thermometer Connections: 1 socket for electric heating element with 1 1/2 inch female thread (2 sockets for storage 300 with 75 mm rigid foam)...

...Gentle and effective cleaning with a 230V power connection. Integrated suction, 3.4 kW, 180°C, water tank 5 liters, boiler volume 3.5 liters, weight 34.

... and tilting handle. • Air performance: from 600m³/h to 4000m³/h • Pressures: from 400 Pa to 2400 Pa • Noise level: between 65 and 72 dB(A) • Available in 230 V or 3×400 V, 50 Hz. • Power from 0.75 kW to 3 kW • 2850 RPM. • Suction and pressure side DN 100 to DN 315...

...filling, dozing, transfer, supply Joint pumps for flow-rates up to 6 tons Remote operations: Monitoring, remote control, power control Technical Data Capacity: 400 - 1500 kg/h, 6-25 lpm, 1.7 -6.6 gpm Power supply: 3 x 400V / 50 Hz, opt 120 / 208V, opt. 277 / 480V/60Hz, 3-phase Power consumption: 1.5 to + 4 kW/h (dep. on pump size) Dimensions (LxWxH): 900 x 900 x 1670 mm / 35 x 35 x 66 in. Pump Triplex plunger pump NP 25/50 – 25/70 Motor: Belt drive Construction characteristics CO 2 supply: liquid from tank system Ring- or stub lines Automatic start cycle Pressure supply needed for valve: 8 b...

... by the gradient of an elevated water container, with 50cm per 5m of hose length being sufficient. The Drip-Blumat can also be used in environments other than soil. The set includes: 12 Drip-Blumat clay cones (each equipped with a T-piece 8-3-8) 7m hose 8mm 1 elbow 8-8mm 1 connector 8-8mm 1 T-piece 8-8-8mm 1 T-piece 8-3-8mm 1 elbow 8-3mm 1 high tank connection 8mm Weight: 0.72Kg...

... the collection container via negative pressure in the next step. In ACO Industry's wastewater and waste management system, the collection container and the grease separator are connected, allowing for reciprocal processes: The separated fats, oils, and solids from the grease separator are regularly transferred to the central collection tank. The significant advantage of this approach is that, since the collection container serves as the central disposal point, the disposal of the wastewater content from the grease separator is eliminated.

For 30 years, COMET-PUMPEN has been one of the leading manufacturers of products for caravans, motorhomes, and the leisure sector in Europe. Our product range includes submersible and external pumps, self-priming diaphragm pumps, fittings made of plastic and brass, lights, range hoods, as well as a diverse selection of accessories. Through a continuous process of developing our products and adapt...

... pharmaceutical and cosmetic industries, as well as for the food, confectionery, and beverage industries. Chocolate tanks Food tanks Tanks for the pharmaceutical and chemical industries Beverage tanks Tanks for industry and raw materials Special design Tank equipment...

... specifications. Additionally: piping systems, pipelines, hose lines, hoses (high-pressure hoses with wire mesh reinforcement, high-pressure hoses with wire spiral reinforcement, hydraulic hoses with textile mesh reinforcement, Teflon hoses, suction hoses, super-flexible low-pressure hoses, tank truck hoses). All standard elements available upon request in special lengths, special angles, and with...

...tank trucks, or special hoses – there is almost nothing we cannot produce or deliver. We specialize in the manufacture of ready-to-install hose lines and compensators. Over more than 100 years, our acquired and continuously updated expertise guarantees competent, individual, and reliable consulting. Technical, organizational, and logistical changes in the market are incorporated by our...