connected pipes Germany

...Connect pipes in the simplest way without disruptive transitions. Custom railings, staircases, and work platforms can be realized through pipe connections. Connection pipes cut to the required length can be easily connected using ITAS aluminum die-cast pipe connectors through a simple plug-in principle. No further mechanical processing is necessary. This reduces assembly effort to a minimum. An...

... using prefabricated pipelines with welded flanges or pipe sections, the pipes can be assembled or connected on construction sites using pipe couplings or flange connections, thereby saving unnecessary welding work on-site.

...Installation of new PE-100 RC pipes as a pipe string (long pipe) Pipe installation via a starting manhole from 1 m diameter Installation length up to 150 m New pipes OD 192, 242 and OD 292 Tight in pipe means only minimal cross-section loss and small annular space without filling The hydraulic capacity of the new pipe can be in-creased by using pipes with smooth interior lining House connections can be connected without the need for trenches...

...With powerful piston strokes, connected to a construction-standard compressor, the pipe jacking machines from the ROVER-TECHNIK product range dynamically drive steel protective pipes through the ground. After the jacking process is completed, the soil core is expelled from the pipe string using water and compressed air. Powerful... With powerful piston strokes, connected to a construction...

... sliding skid ring firmly rests against the pipe. Segment Sizes With only 5 different segment sizes, all pipe diameters from DN 15 can be equipped. The segments are connected and tensioned by the plastic tongue. The form-fitting connection is highly load-bearing.

... 0.01 (FED 209 E). The system prevents particles from being discharged in the environment where the linear unit is located. This has been achieved by using a special straight seal that closes the horizontal opening where the slider moves, as well as by the operation of a 0.8 vacuum pump connected to 2 vacuum pipes located inside the drive head and the idle head. The system allows vacuum to be...

... sealed and therefore does not come into contact with the medium. The compact sensor design is particularly suitable for installation in pipes with small diameters. The OPTISENS IND 1000 can be easily connected to the MAC 100 or any other analysis transmitter. Measuring range: 0.5…2000 mS/cm...

...The swimming pool hose from FRÄNKISCHE INDUSTRIAL PIPES impresses with its high stability and flexibility. The product is incredibly easy to install and handle, as it can be easily divided at the pre-formed sockets and connected without any hassle. Due to its impact resistance and chemical durability, the plastic hose can be used for many years. Material: PE / -40°C to +70°C Other materials...

... sealing function of the fixed support pipe. The model is available in various versions. Pipe diameter: 25mm - 50mm Thread sizes: 3/8" - 1 1/4" Material: Brass or CUPHIN Dimensions: for PE pipes 25 - 50mm diameter Application: Cold and hot water up to 95°C Application: Gas up to 4 bar Application: Heating / district heating For pipe types: PE80, PE100, PE-Xa, PE-Xc, PE-RC, PE-RT, PP...

... making a smart choice in any case. The pipes and fittings are longitudinally welded using the TIG or MIG process and can be easily connected with flanges or clamping rings. All components are available painted or powder-coated in fire- or strip-galvanized black sheet metal (16Mo3), aluminum, or stainless steel (1.4301, 1.4404, 1.4541, 1.4571, 1.4828, etc.). Are you planning your ventilation technology for the first time or redesigning it? We offer you everything from a single source: from static calculations to design and construction, all the way to manufacturing and assembly. Your advantage?...

...Clamps directly on straight copper pipes ! Double seal construction withstands a vacuum of up to 1.3 x 101 Pa. Clamps direct on to a straight copper pipe eliminating unnecessary welding or flaring. Withstands a vacuum of up to 1.3 x 101Pa (when connected) making it possible to be used in leak testing, evacuation and refrigerant gas charge. Select from three standard types of seal materials to be...

...With the EURORAIL LED light, you save on costly light carriers or light strips. The lights are attached directly to iron beams, Odenwald ceiling tracks, or other magnetic materials using magnets and connected with the included connectors. Additionally, a wide range of accessories is available for mounting the lights and cables or installation pipes directly to grid frames or T-beams. With the...

... connected with large-area heat conduction profiles. Through these heat conduction profiles, the BEKA copper pipe meander has thermal contact with the metal cassette. For optimal heat conduction, BEKA bonds the metal cassettes to the heat conduction profiles under pressure and temperature. These are optimal conditions for high cooling and heating performance.

... inlet) - 3 m or 4 m reach - External support and joint system - Lower static pressure & noise - Easy and stable positioning during operation via handles and swivel bearings - Minimal dust buildup inside - Can be connected to other systems or used with a dedicated extraction fan connection - Optional – lighting in the hood...

...In dark radiators, two U-shaped connected pipes serve as the radiation surface. The burner unit is housed at one end of the pipe. The burner generates a flame that extends relatively far into the pipe. A suction fan at the other end of the pipe draws the combustion air through the steel pipe. It is then expelled from the hall via an exhaust system. A reflector concentrates the heat waves emitted...

... and air injection sections are connected together in series. The capacity range extends from approx. 20,000–300,000 m³/h. RS / RX filters are suitable only for vacuum and positive pressure operation. The housing parts are usually made of 2 mm thick galvanised sheet steel. A thicker material in a painted execution as well as in stainless steel is also optionally available. The RS / RX series is...

...The hydraulic pipe extraction devices TP 10, TP 15, and TP 30 are tools designed for the disassembly of pipes from the roll-welded area of pipe bottoms. The device consists of a portable hydraulic unit and an extraction unit connected via hydraulic hoses. The extraction unit comprises a combined spreading and pulling cylinder and is completed with the necessary extraction tools (spreading sleeve...

...Application: Solenoid valve system for automatic monitoring the leaks of water supply pipes and tubes. To be used in household and laboratory equipment. Installation Fully automatic monitoring can be built in to the supply pipes of a water source. The sensor lays on the floor and is connected with the control electronics through a cable. The solenoid coil and control electronics are built in...

... network: AIRnet, quickly installed, sustainable, and cost-effective in operation. Available in aluminum and stainless steel, the system offers a wide range of products for various applications. It can be connected to existing networks and remains easily expandable at any time thanks to its modular technology. You can also purchase AIRnet directly from us online.

... manufactured using the following welding processes: • Infrared welding process • Butt welding process • Electrofusion welding process • Socket welding process Particular safety is provided by the internal pressure testing of the pipes with the corresponding documentation. With our comprehensive service, we can guarantee you a final product whose components are optimally coordinated with each other. In ventilation construction, plastic pipelines or ventilation ducts are preferred in the chemical industry. These are typically connected using hot gas welding.

... utilizes heat pipe technology. These pipes are physically limited to 120 degrees by default and cannot overheat or generate unwanted steam under proper pressure maintenance. Cavitation shocks are excluded due to this technology. The shut-off temperature of the pipes can be adjusted upon customer request between 120°C and 160°C, depending on requirements.

...For the most common dosing pumps from various pump manufacturers, our pump connection fitting offers a variety of connection options for pipes and hoses. For example, diaphragm or hose pumps can be directly and securely connected with an M20x1.5 external thread. The insert part is made from a single piece with an integrated fitting, eliminating the need for time-consuming welding.

...Our drinking water systems are connected to your existing water supply. You can choose to cool your water or add carbonation as you wish. This device is serviced biannually by a certified professional, with filters and pipes being replaced, and a hygiene certificate issued. You no longer need to worry about water supply. Additionally, transportation and storage are eliminated, which ultimately benefits the environment.

...Having a very low energy consumption the humidity loggers can be used for up to a few years without any battery change. While DCXP-RH8 is a 16 channel datalogger for humidity and temperature, whcih means up to 8 combined probes can be connected, the DCXP-RH16 has twice as much chenels ready to connect up to 16 combined humidity and temperature probes. For your application Driesen + Kern GmbH offers a range of probes: miniature probes (D=4mm, L=20mm) , Probes for pressurised pipes (DKRF374), Standard probes D=8mm und L=40/100mm (DKRF300) and many more.

... process. The best way to soften water is with a water softener that is directly connected to the water supply. A water softener is a device used to make water soft by removing the minerals that make it hard. What does a water softener do? Water softeners are specialized ion exchangers that remove positively charged ions. Softeners primarily remove calcium (Ca2+) and magnesium (Mg2+) ions. Calcium and magnesium are often referred to as "hardness formers." Softeners are...

... withstand the high temperatures of tube collectors of up to 220 °C. The wide range of system accessories ensures that the collector can be connected to the heat storage tank quickly and reliably. The flexible expert for increased efficiency in high temperature applications...

...In the case of a wall dispensing unit, the technology is also housed in a separate location, similar to a fuel dispenser, and is connected to the dispensing unit via pipes.

...Steel construction, as part of civil engineering, refers to the construction of load-bearing structures made of steel. In addition to steel beams, plates, pipes, and special shaped parts are used, which are connected by welding, bolting, or riveting. 3D CAD designs allow for a good visualization of concepts and constructions, significantly facilitating coordination with architects, structural...

... Total height: 1.00 m Each element consists of 2 foldable grids that are rotatable but firmly connected. By adding more elements, the grid can be expanded indefinitely. 1.00 x 1.00 m, 2-part = €481.78 1.60 x 1.60 m, 2-part = €518.67...

... temperature monitoring for pipes with diameters of 4...300 mm ■ Patented measurement system ■ High measurement accuracy, fast response time ■ Easy installation ■ No welding, no process interruption ■ No additional insulation required ■ Measurement unit can be recalibrated ■ Temperature switch in 2-wire technology, current output 4 and 33 mA, switching function max. normally open ■ Switching point...