ceramics line Germany

...single inlet/outlet line or combined inlet/outlet line with stationary or rotating syphon pipe brass (rotor stainless steel) small diameter ceramic seal CDCartridgeDesign PRESSURE MAXIMUM 10,0 bar water TEMPERATURE MAXIMUM 90 °C water SPEED MAXIMUM 1000 1/min NPT thread 3500 1/min ISO 228 thread SIZEDN 10 (3/8") DN 15 (1/2") DN 20 (3/4") MEDIA:water...

...For quality inspection of surface defects on ceramic cylinders and highly reflective surfaces Manufacturing ceramic cylinders: 100% inline inspection for surface defect-free production in the production line. Numerous experimental setups were tested beforehand to establish a meaningful 100% inspection for surface defect-free ceramic cylinders. However, the test objects were not suitable for...

... minutes. The product inspection system XRE-D X-ray inspection system detects all foreign objects, which due to their density, chemical components or mechanical dimensions absorb X-rays at a higher or lower degree than the surrounding product. During production numerous detection tasks can be safely fulfilled such as the detection of metals, glass, ceramics, stones, raw bones, PVC, Teflon, rubber, glass fibre reinforced plastics etc. In packaged or unpack-aged food (non-magnetic stainless steels and non-ferrous metals in aluminium packaged food). X-Ray inspection is an ideal solution for...

... all three dimensions during calibration: differential pressure, ambient temperature and static pressure are taken into account in combination. Pressure type::differential; vacuum Technology::Piezoresistive; ceramic Output signal::analog Measuring range::30 mbar…16bar / 0.44…232 psi; Line pressure: up to 160 bar / 2320.1 psi...

... on highly stable, piezoresistive pressure measuring cells, which are mounted together with an ASIC on a ceramic substrate. The sensors are compatible with the SM5852 as their successor and feature a more modern ASIC for improved temperature compensation and calibration.

... the profile. Features: — Nominal pressures: 0 ... 400 mbar to 0 ... 600 bar — Accuracy: 0.25 % FSO BFSL (Class 0.2) — Rotatable housing — 2-line LC display, 4.5-digit 7-segment display, 6-digit 14-segment additional display — Various mechanical connections: inch, NPT thread — Ceramic membrane Optional features: — Min/Max function with reset capability — Zero point and full scale calibration — Pressure unit adjustment — Automatic shut-off configuration...

...• Fully encapsulated, flexible LED light line with heat-conductive polyurethane ceramic compound and protection class IP 67 • Only one bin per light color according to 3-Step MacAdam • Resistant to water, UV radiation, abrasion, and chemicals • Wide range of white tones (2,800 K to 6,500 K) • Low bending radius of 20 cm (only one axis) • Absolutely homogeneous, very bright illumination across the...

...The INFICON SKY CDG025D Capacitance Diaphragm Gauge line of highly accurate temperature compensated manometers is designed for stable performance in harsh manufacturing tool environments. Advanced digital electronics improve gauge performance and offer easy handling features such as one pushbutton zero function and setpoint adjustment. The corrosion resistant ultra pure ceramic sensor provides...

...HIGH VOLTAGE CERAMIC CLASS II DISC CAPACITORS – NY2 SERIES. Technical Data: from 3 to 15 kV Working Voltage, 100 to 5600 pF Capacitance. Applications: High Voltage Multipliers, High Voltage Noise Filters, High Voltage Power Supplies, RF Coupling, RF Bypass. The high voltage capacitor line of the Class II series from Dean Technology utilizes high dielectric constant ferroelectric materials based...

...We offer a line of ceramic bearings upone request. are made of ceramic in rolling elements and rings, and are characterised by a particularly large pressure range and temperature range of -250°C to +1000°C Bearings are current insulated no lubrication required ...

...Chemical industry, Geology and mineralogy, Glass and ceramics industry, and Soil research. The FRITSCH jaw crusher PULVERISETTE 1 premium line is ideal for a maximum feed size of 95 mm and a maximum continuous throughput of up to 250 kg/h, depending on the material and gap setting.

...With the innovative FHL recipient lighting from our JEVAlux® product line, we offer you an easily mountable halogen lighting solution for your vacuum chamber. JEVAlux® FHL Flange-mounted recipient lighting Vacuum feedthrough optionally available in flange sizes DN25KF or DN40CF Halogen light source (G4 socket) 24 V / 20 W on ceramic base Plug-in power supply with connection cable and plug...

...The JET One labels, for example, plastic, glass, wood, metal, ceramics, technical composites, cardboard, and paper, contactlessly with fixed and variable data: such as best-before dates, LOT/batch numbers, or even graphics. From any position and in any direction. Both forwards, backwards, mirrored, and rotated. Different product surfaces – whether convex, concave, rough, smooth, flat, or relief...

...Cost-effective industrial ICP®/ IEPE accelerometers are ideal for fixed installations and use in continuous on-line monitoring systems. This improves safety when installed in hazardous or inaccessible locations. Connection can be made via switches or junction boxes for route-based data acquisition systems. The Model 601A01 is suitable as a low-cost industrial ICP®/ IEPE accelerometer for a...

... fields of: Electronic Device Manufacturing Microwave Light Emission UV-Curing Industrial and Vacuum Drying Semiconductor Automotive Ceramic Industry Food Processing Dispensing and Coating Bonding & Lamination Applications Magnetrons' Line-up: 2M121A, 2M131, 2M130, 2M256, 2M251, 2M252, 2M304, 2M305 Magnetron 2M121A: Power (kW): 1.4 Frequency(MHz): 2,455 Cooling: Forced Air Outline Dimensions (mm): 127x104x109 Weight (kg): 1.4 Magnetron 2M130: Power (kW): 2.0 Frequency(MHz): 2,455 Cooling: Forced Air Outline Dimensions (mm): 128x116x122 Weight (kg): 2.3...

... temperature and vacuum can be optimally set for each distillation program. This means maximum solvent recovery and minimal wastewater impact, as well as a reduction in water consumption to zero due to the elimination of water circulation pumps and line water cooling. The vacuum component is a combination of a PTFE diaphragm pump with an electronic controller and includes a ceramic sensor; operating range from 1000 to 0 mbar. The vacuum is infinitely adjustable. Once the desired value is reached, the vacuum pump switches off...

... to use fast-drying inks on Ethanol-, Acetone- or MEK base provides a universal solution for various marking applications. No matter if the surface is made of cardboard, plastics, metal, glass or ceramics. Trough a process of consistent development of the established line coder "PicAS" EBS-200 we created a totally splash water protected system which is also independent from external compressed air. Technique:DOD inkjet Configuration:for integration Other characteristics:automatic, for paper...

... including glass, ceramics, crystals and ferrous materials. The Lapmaster line of Dual-Lap machines are based upon a two-way & three way planetary concept designed to yield very precise and repeatable results. Only the Inner and Outer Gears rotate allowing the carriers to move around the surface of the plates, whilst the top and bottom plate stay stationary. The larger DL500 and DL770 use a 3-way system, where the top plate, bottom plate and sun gear rotate.

... highest precision within the corporate group. The headquarters in Uhingen boasts 5,000 square meters of production space and 250 square meters for research and development. The EWS.TechLine is equipped with the latest technologies from EWS: EWS.HPC-Line, EWS.Polygon-Joint, EWS.Butterfly-Seal, and EWS.Coolant Management. With the quick-change system EWS.Varia VX, the company sets standards in...

... Our team includes two designers who can turn your sketch into a printable file. Additionally, we operate an online shop with a range of products related to 3D printing. In the coming months, we are actively looking for companies that would like to commission us for small series or collaborate with us to establish an external production line.

... the new product line of Steinbach AG – Form Ceram. This line features additively manufactured (3D-printed) ceramic components with the highest precision, even in single or small batch production. The LCM technology (Lithography-based Ceramic Manufacturing) used by Steinbach AG is the innovative manufacturing process that ensures 3D-printed ceramic products exhibit the same outstanding material...

We specialize in the development and manufacturing of technical ceramics, focusing primarily on particularly demanding operating conditions. On our main production line, we manufacture honeycomb-shaped heat exchangers for exhaust gas and air purification systems. This contributes to a cleaner environment. Due to our extensive technical expertise, we also develop ceramic specialty applications...

... tool industry. With production sites in Europe, South and North America, as well as a globally present sales and logistics network, we are here for you whenever it comes to reliably and technically connecting metals. With many years of experience and comprehensive knowledge of the soldering processes in different industries and applications, we develop tailored solutions for specific customer requirements for joining metallic materials, hard metals, and ceramics in our own Brazing Center.

... plants and machines for the thermal and thermochemical treatment of metals, technical ceramics, composite materials, and new materials into an efficient heat treatment line tailored to your application. With over 20 years of international project experience, we are here to support you competently, forming the basis for a trusting collaboration and the implementation of your investment into your...

... processing, shaping, and ceramic firing. Kandern Fireproof stands for quality with a long tradition, ensuring that fire becomes safe warmth. History: 1878 On October 1, 1878, the newly founded ceramic factory Ernst Kammüller begins the production of fireproof bricks at the Kandern location. 1900 Due to the steadily growing demand, investments are made in new, larger facilities that enable a...

Tools and machines for manual deburring, grinding, and polishing work, up to high-gloss polishing on injection molds. We are experts in achieving the best surfaces through handwork on tool steels and aluminum. Toolmakers, mold makers, and maintenance personnel will find everything about repair welding using impulse welding or laser, carbide coating for punches and dies, deburring, line...

... ceramics, thick-film electronics, and other high-temperature applications such as LTCC, multilayer. Probing tips and manipulators for contacting microcircuits and wafers. Laser trimmers for thick-film, thin-film, hybrids, LTCC, wafers. AOI systems for hybrids, LTCC, and solar cells. Systems for the production of silicon or thin-film solar cells and panels such as simulators, strippers, laminators.