cast iron valves Germany

...Belven is a manufacturer of swivel valves based in Belgium, operating for over 40 years. As a leading distributor, Ahrendt Industrial Valves also carries out the automation of the valves with pneumatic or electric swivel drives in its own workshop. In addition to the Belven shut-off valves BV10 and BV12, high-quality Belven ball valves type BV4 made of steel and stainless steel are also available, featuring extensive certifications such as ATEX, Nace, TA-Luft, ADR, and SIL or fire safe.

For over 70 years, we have been producing and supplying shut-off valves, throttle valves, and control valves made from various materials and sizes, primarily for industrial applications as well as for building technology and the automotive sector. We use readily available components that can be quickly assembled and equipped with the desired drive systems. We are committed to solving your system c...

At the time of our founding in 1937, work was still being done underground with pneumatic hammers. To regulate the necessary compressed air for this, as well as for water management, valves were needed. These were supplied for decades by companies from Sprockhövel, including von Scheven. Thanks to the foresight of our founder Rudolf von Scheven, we focused early on the synthesis of new plastics fo...

... event of a leak or other hazardous situation. Bellows Shut-off Valve Invest in the longevity of your industrial facility with leak-free, environmentally friendly industrial standard bellows valves from Fergo. We offer the bellows shut-off valve in housing materials such as spheroidal graphite, gray cast iron, and steel. They are available in standard pressure ratings...

...Main products: Brass valves, cast iron valves, gas valves, plumbing and sanitary ware, water meters and various types of pipe fittings and accessory products Applications: Water supply and drainage systems, gas systems, urban heating, HVAC and piping connections Honorary titles: High-tech Enterprise, Famous Chinese Valve Brand, Zhejiang Manufacturing Certification ...

...For heating system, made by casting and machining, material annealed cast iron KTH35010, sizes Ø46mm x 15mm, weight 0,1kg, annual demand 30.000pcs...

...Materials: Stainless steel, cast iron, plastic Types: Centrifugal pumps, submersible pumps, booster systems, circulation pumps Applications: Water supply, wastewater, heating systems Advantages: High reliability: Robust materials and precise manufacturing for long service life Energy efficiency: Efficient solutions for economical operation Versatility: Wide product range for various applications...

... customers. 700 new products per year testify to a high investment rate, based on excellent market feedback and a strong recognition of Schmiedeberger cast parts. With our extensive product range, we can optimally respond to customer requests and serve a variety of customers from diverse industries. We supply the following industries: Mechanical engineering Automotive Agricultural machinery Construction machinery Pump manufacturing Valves Electrical engineering Tool manufacturing Custom casting...

...Hose pinch valves have a cylindrical passage in nominal sizes DN 15 – DN 300, directly actuated by compressed air, pressure water, or other neutral gases. The replaceable hose insert can be supplied in various elastomer materials for a wide range of applications. The housings and cone flanges of the valves are available in gray cast iron, lightweight metals, stainless steel, and plastics, such...

... Gas Engine, XR2100 Model Number: 25T2 Engine Technology: Single Cylinder, 4-Stroke, Air-Cooled, OHV (Overhead Valves) Displacement: 420 cc Cylinder: Cylinder with Cast Iron Sleeve Bore: 90 mm Stroke: 66 mm Fuel Tank Capacity: 6.6 liters Oil Capacity: 1.1 liters...

... polyethylene can be used for abrasive, viscous and shear sensitive media. Air operated diaphragm pumps made of metal The metal pumps have a pump housing made of aluminum, cast iron or stainless steel. All pumps are available with composite membranes made of PTFE, EPDM or NBR. The material of the valves and seals is coordinated according to the choice of membrane.

...Wedge flat slide valve, soft-sealing, short construction length F4: Gray cast iron / spheroidal graphite, spindle V2A / V4A, coating AKZO-NOBLE, with ISO flange for electric drive or also in long construction length F5 Soft-sealing, maintenance-free wedge flat slide valve suitable for industrial applications, wastewater treatment plants, cold, hot water, and neutral liquids. Type 019BAZ for use in aggressive atmospheres with EKB Powder Coating AKZO-NOBLE - Resicoat R4-FB. Spindle: V2A or V4A Construction length: EN 558-1 GR 14 (F4) or GR 15 (F5)...

...Keil flat slide available in the following versions: – Metallic sealing – Soft sealing Housing materials • Grey cast iron • Ductile cast iron • Steel cast • Stainless steel • Special materials Nominal diameters • DN 40-300 Pressure ratings • PN10-PN16 • ANSI...

...- High mechanical strength - High flow rate due to maximum inner diameter - Flow direction is arbitrary - Valve can be cleaned without disassembling the actuator Type: Diaphragm Actuation: Pneumatic Function: Control Body: Double flange, cast iron, EPDM, NBR Number of ways: 2/2-way Additional features: ANSI, normally closed, double-acting, for high flow capacity...

...The flanged valve with pneumatic actuator and body made of gray cast iron or spheroidal graphite iron in installation length and flange pattern according to DIN. Limit switch Pilot valve Manual override version with pressure relief Size:DN 15 - DN 150 Pressure:PN 16 Material:EN-GJL-250 (GG 25), EN-GJS-400-18-LT (GGG 40.3) Media temperature:-10°C to +170 °C Connection:Flange acc. to DIN EN 1092-1 Application:Gases, vapours, fluids...

Hermann Schmidt GmbH & Co KG is an established family-run company in Essen with approximately 80 employees and is one of the key suppliers to the German wholesale trade in the market for building technology, sanitary, and heating. Three pillars continue to form the basis of success: the production of fittings and valves, export to the most important markets in the world, and acting as a factory re...

...Drain valves for viscous media. Shut-off technology using a closure plate. Known as perfection valves. Drain and emptying valve for viscous media. Article series: 11180-Type Surface: Red protective coating...

...Shut-off valves in cast iron and stainless steel with soft sealing, DN 40-1100, PN 10 to 40, T max. 230° C...

...Cast iron fittings with threads EN 10242 • Steel fittings with threads • Stainless steel fittings with threads • Brass fittings with threads • Weld fittings...

... recommendations of the UBA as well as the requirements according to DVGW worksheet W 270. — for tapping 1"-1 1/2" — with Vario seal — with ball shut-off — with stainless steel quick-action spindle — with plastic inner lining — surface protection EKB Blue Outlet variants: 1" IG - 2" IG or VLUX Material: Cast iron Tapping: 1" - 1 1/2" for pipes: cast, steel, asbestos-cement pressure: for water up to PN 16...

...Body material is from cast iron (GGG) and wedge is fully covered by NBR or EPDM. Spindle material is stainless steel. Valve is designed such a way that provide safe sealing. By turning the stem clockwise, with the elastic design of the sealing wedge gives absolute tightness with minimum torque. Application: AB soft sealing gate valves are used for closing and opening fluid flow. The Gate valves...

...Machine Base Heavily ribbed cast iron structure with integrated dove tailed slideway for the workhead and steady rest. The machine base houses an industrial type flood pump for delivering coolant to the grinding site and a baffled drawer type coolant reservoir which can be drawn out for ease of cleaning. The machine base houses also the control panel for the motors. Grinding Spindle The...

...In the field of pipe connection parts, OTTO ROTH covers almost all common dimensions and materials. OUR PRODUCT RANGE: • GF cast iron fittings • Steel fittings with threads • Steel fittings for welding • Steel pipe bends – pipe bottoms • Flanges • Valves • Seals • Pipe clamps • Straub couplings Valves, fittings, pipe bends, and flanges can also be supplied in stainless steel versions, as well as in other special sizes or materials. Additionally, we can provide all products with the corresponding certificates upon your request.

...For steel, iron, cast iron. Thinnable and washable with oil, petroleum, gasoline. Processing Instructions * for preliminary grinding of automotive valves ** for finishing grinding of automotive valves...

...In the field of pipe connection parts, OTTO ROTH covers almost all common dimensions and materials. OUR DELIVERY PROGRAM: • GF cast iron fittings • Steel fittings with threads • Steel fittings for welding • Steel pipe bends – pipe ends • Flanges • Valves • Seals • Pipe clamps • Straub couplings Valves, fittings, pipe bends, and flanges can also be supplied in stainless steel versions, as well as in additional special sizes or special materials. Additionally, we can provide all products with the corresponding certificates upon your request.

...Oil-lubricated, air-cooled, robust piston compressor The use of high-quality cast iron for the main components such as the cylinder, cylinder head, connecting rods, and piston, along with stainless steel valves and modern rolling bearings, is a testament to the high quality of these piston compressors. All these measures result in very high durability and thus a long lifespan for the entire...

... offer maximum functionality in minimal space. This is backed by extensive expertise and a seamless in-house process chain. From development or design according to your circuit diagram, through procurement and cutting of raw materials, to automated production, high-pressure cleaning with our own washing facility, and functional testing. Result: 100% chip-free control blocks, available with a test certificate upon request. Bott control blocks – Control blocks made from cast iron, aluminum, or steel – Max edge length 800 mm Optional: – Blocked or equipped with valves – With surface coating –...

... costs. Valves (available as an option) ▪ Bypass, reverse flow, non-return or multi-function valve Clogging Indicator ( available as an option ) ▪ Visual, electrical or visual-electrical differential pressure indicator Filter Elements ▪ Filter elements of SE series Construction ▪ High pressure filter designed for manifold mounting ▪ Threaded mounting holes and fluid ports on side of head ▪ Option of standard or two-part top loader version Operating Pressure ▪ Max. 315 bar / 4.560 PSI Nominal Flow Rate ▪ Max. 1.135 l/min / 300 US GPM Materials ▪ Filter head: Spheroidal Graphite Cast Iron ▪...

...We manufacture on CNC lathes with C-axis and counter spindle. The use of a CAD programming station allows for cost-effective production. For example, we produce pump parts from gray cast iron, valves from stainless steel, or various drive elements. CNC Turning • up to Ø 800 mm • up to turning length 3000 mm • C-axis with 0.001° positioning • Counter spindle with C-axis Long Turning • up to Ø 16 mm • up to length 250 mm • C-axis with 0.001° positioning Conventional • up to Ø 1100 mm • up to turning length 3500 mm...

...The Lapmaster Model 48 is equipped with a 48 inch (1219mm) diameter lap plate. This is manufactured from Grade 300 grey cast iron to ISO 185(2005). It consists of individual segments bolted to a support plate. Outlets are provided to feed each conditioning ring via a track wire, with individual control valves. This system is designed so that a circulatory flow is established. The pump is capable...