capillary Germany

...The particularly robust electromechanical surface thermostat can be used wherever simple maintenance of product temperatures is required. A clear cover protects against accidental adjustment of the temperature setting. Features: • stable polycarbonate housing with clear cover • indicator light for power and operation • temperature setting visible from the outside • direct connection of supply line and heating possible • switching capacity up to 16 A • screw connection 3 x M20 • capillary tube length of the controller approx. 2 m Also available as a controller/limiter version.

...Highly effective water repellent, mainly for polymer-sealed concrete products. Provides strong water repellent effect, minimizes capillary water absorption, minimizes efflorescence.

...Optigrun Water Retentionbox WRB 170 on roofs used as retention areas, under extensive and intensive vegetation as well as traffic areas such as terraces, fire brigade access roads, car parks, etc.With closed, load-distributing structure For temporary and/or permanent storage of rainwater with regulated water discharge through a Flow Control System With Capillary Bridges to transport stored...

...-effective, creating a solid foundation and providing drainage as a capillary-breaking layer. As a lightweight, load-bearing insulation material, its thermal insulation property is effective as external insulation against the soil. The simple and thermal-bridge-free subgrade construction is straightforward with Veriso foam glass. Contact us for more information!

... range: 0.3 - 100 mPas Fluid connection: tubing, OD 1/8"; master capillary: tubing, OD 1/8"; secondary capillary: tubing, OD 1/16" Wetted parts: PEEK™; fittings and tubings: ETFE, PEEK™ Dimensions (L x W x H): 32 x 25 x 25 mm (By-pass block without pump) Weight: approx. 160 g (version 316L without pump) approx. 50 g (version PEEK™ without pump) Remarks: subject to technical changes...

...This inline thermocouple is especially invented for using under humid conditions. Compared with normal wire production this wire isolation is made in one work process, both conductors get moulded in Teflon at the same time. With this wire the measurement equipment is protected from capillary rising moisture through the wire. gas-, steam- and watertight Temperature range: -75°C to +250 °C, short...

...OKS 621 is a fast-acting rust dissolver for industry, workshop and hobby applications. The solvent contained in OKS 621 cools down the assembled parts/screws rapidly to -40°C. This results in a slight shrinkage of the affected profile. Capillary cracks in the corrosion layer appear, allowing an easier penetration of the creeping oil. High-performance rust remover for fast and nondestructive...

...Heated, for plates and menu plates. Design: Casing and base made of chrome nickel steel, chromium steel plattform. Ther mos tat and on-off switch loosely attached, with built-in casing for mounting into site facing. Thermostatically adjustable from 30 – 90 °C. Capillary tube length 1800 mm. Capacity: approx. 50 plates. E.-Connection: 230 V-0,4 kW. Thermostat-built-in casing 107 x 175 x 80 mm, cut-out measures for built-in casing 87 x 150 mm. ...

... material. In addition to its excellent thermophysical properties, SILCAL is protective gas resistant to reducing gases, H2, CO, CH4, NH3, and N2. SILCAL boards are capillary active and absorb water. For work involving fireproof concretes, a hydrophobic barrier primer is recommended, which can be applied at the factory. This eliminates the need for labor-intensive work with barrier films. SILCAL...

... the UHL component system, the Inspection Microscopes can be easily customized and provide simplified maintenance the PM4, PR5, PR7, PR8 and PR9 Inspection icroscopes are providing a direct, alternating view of capillary and counterbore without moving the spinneret several instrument types provide the fast inspection during stage movement with a large field of view with a speed of up to 2300 capillaries per minute...

...Steel wall sleeves are typically installed in ceilings, walls, or floor slabs during the formwork process. They are designed to accommodate sealing inserts for pipe or cable penetrations. If the requirements regarding corrosion resistance are less stringent, wall sleeves are also used in galvanized or simpler black versions for cost reasons. To provide additional protection against potential liquid penetration (possibly due to future building settlement) caused by capillary action, wall sleeves are often equipped with a seamlessly welded flange ring.

...Capillary tube thermostats with automatic or manual reset from -35°C to 400°C - Thermostat, temperature controller, or temperature limiter - Single-pole or double-pole, normally open or normally closed switch - Available as built-in thermostat or in housing design - Switching temperatures selectable from -35°C to 400°C - Switching capacity up to 30 A 250 VAC or 18 A 400 VAC (resistive load) - Flat plug or screw connections - Approvals: ENEC, UL...

...Complex capillary tube for high-pressure gas lines Areas of application: Aviation, Industry...

...Heat pumps require a driving energy, usually electricity, and a heat source. Heat pumps that utilize the freely available temperature in the ground operate particularly economically. The robust and durable capillary tube mats of the P series have been successfully used for many years as compact absorbers in brine-water heat pump systems. This allows for the utilization of heat in the ground for...

...The capillary tube thermostats are equipped with liquid-filled sensors made of copper, which can be considered as temperature-dependent pressure sensors. Due to temperature changes, the pressure in the sensor changes, which is transmitted to a switch via a bellows system. The sensor and bellows system are connected by a copper capillary tube. A pressure spring acts as a counterforce. The...

...The 2M connector was developed for thin pipes such as capillary tubes with an outside diameter from 0.7 to 6.35 mm. It consists of a sealing cone which is pushed into the matching inner cone of the connector and acts as a bushing for the pipe while performing a sealing function. An additional O-ring, which is protected from damage by a pressure disc, holds the pipe in place and prevents it from being pulled out accidentally. Pressure Stage:PN01...

For over 20 years, we have been delivering innovative, high-quality products across Europe. We offer fast delivery times, clear order quantities, detailed product information, as well as support for sales or application issues. Our product range includes: - Adhesives - thread locker, bush and bearing adhesive, surface sealant, bonding adhesive, adhesive for stainless steel or copper, two-compone...

Since 1982, TEMTECH has been developing, producing, and marketing components for temperature protection in electrical circuits, as well as temperature sensors and other products for temperature technology. Through this specialization, we have become a competent and renowned partner in the electrical industry. Our products have proven themselves millions of times worldwide due to their robust cons...

... certain that they will not be subject to any legal claims in case the lead tolerances are exceeded. Also, lead-free fittings satisfy the market's desire for safe and healthy drinking water installations. PURAFIT® capillary fittings from CuSi are tested and certified by all relevant national and international certification bodies and can be used for a wide variety of applications in the sanitary and heating industry Material:CuSi Operating pressure:Flammable / technical gases: 5 / 16 bar Operating temperature:120 °C - 225 °C...

We supply drawn wires starting from 0.025mm in all common • materials, such as stainless steel, nickel silver, brass, bronze, copper, aluminum, etc. • special materials like tungsten, titanium, molybdenum, tantal, etc. • heating element alloys and • EDM wires Sheets/Strips/Metal Foils • stainless steel, titanium, tungsten, molybdenum, bronze, nickel silver, etc. Round Bars • stainless steel, ...

The devices presented on this website conform to our standard program and are partially available from stock. In addition to the listed devices, we manufacture intermediate sizes and special devices according to your drawings and specifications, devices for acid and water distillation, accessories for the semiconductor industry, as well as diffusion barriers, ampoules, caps, push rods, and the lik...

... Printing Inks As a distribution partner of Marabu GmbH & Co. KG, we supplied printing companies with screen printing inks and auxiliaries until June 30, 2016. Following the conclusion of our 30-year collaboration, please refer to our notes regarding the printing inks from NAZDAR Ink Technologies. Copy Materials Liquid emulsions or capillary films? Let us provide you with practical advice. Screen...

...The measurement principle is based on the volumetric expansion of the filling liquid in the glass capillary. The expansion of the filling liquid caused by temperature effects can be read on a scale. Application area of machine thermometers Machine glass thermometers can measure temperatures from 60°C to +600°C. The display accuracy is ± 1.6% of the measurement range end value.

...Without inserted capillary Good adhesive flow Precise application Thread: 3/8“ UNF Compatible with Nordson (Series H200 / H400 / SolidBlue / MiniBlue) Robatech and ITW-Dynatec (Micro) Tread:3/8“ UNF Diameter:0.2 – 1.0 mm...

...For sale is a capillary column. Manufacturer: Macherey-Nagel Length: 25 m Inner diameter: 0.53 mm Outer diameter: 0.75 mm Max. temperature: 300 °C Type: FS2 SE-52-CB Non-polar phase Used item - heavily used condition...

...Copper capillary tube 1.6 mm x 3.0 mm, 1m. Minimum order quantity 1 m. Price per meter. The rolls are sold by the meter.

... of capillary-tubes are needed. These special tubes are glasses, which are adjusted to the physical parameters of the metals. We draw and cut such capillaries precisely to final size. Thereby the glasses can be fused on the customers wires and pins, which are made of metal. Scatter discs for the endoscopy Glass rings in different sizes with two satin cut sides, allow to manufacture small ring lightings for example for the endoscopy. By means of the rough surfaces of the glass rings, the light, coupled on the back, is refracted and diffusely spread. Different diameters and thicknesses as...

... transparency and gives KAPILUX solutions a particularly modern, vibrant appearance. In the product variant KAPILUX T, the tubes of the capillary insert are transparent, while in KAPILUX W and KAPILUX WS, they are colored white. KAPILUX WS, with the capillary axis angled towards the glass, has been specifically developed for overhead glazing. KAPILUX is suitable for a wide range of applications such as museums, sports halls, administrative buildings, commercial properties, and industrial constructions.

...In penetrant testing, the capillary forces of fine surface cracks and pores are utilized to make them visible. A distinction is made between color penetrant testing and fluorescent penetrant testing. Procedure description: Cleaning Penetrant Intermediate cleaning Developing Inspection...

...Our technology CapFS enables us for the first time to utilize building surfaces that were previously only considered from an energy-saving perspective for energy generation. The facade of a building is no longer seen merely as an energy consumer, but rather as a carrier surface for renewable energies. The power of the sun heats a capillary tube mat installed beneath the plaster, which is flowed through by a medium. This medium transports the solar radiation heat via a heat exchanger to the desired consumer.