bronze parts Germany

...CNC turned parts made of aluminum...

Pressteck is one of the leading manufacturers of precision deep-drawn parts on transfer presses and currently employs more than 100 staff. We manufacture drawing parts and assemblies according to customer specifications. We provide customer service throughout the entire lifecycle of your products. At PressTeck, all processes are well-organized and certified. From material supply to production and ...

... specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

...We can manufacture stamped and bent parts (strip bent parts) from spring steel, stainless spring steel, brass, copper beryllium, bronze, and other commercially available materials in strip thicknesses of 0.1 – 1.5mm and strip widths of 2.0 – 80mm. Our customers are found in the automotive industry, electronics, mechanical engineering, aerospace, medical technology, optical devices, and the toy industry.

...We produce bronze precision cast parts from single pieces to series delivery using the precision casting process. Cast parts up to a size of 12x12x25cm Size: max. 12x12x25cm...

...Forged parts made of steel, stainless steel and aluminum including mechanical processing. Pressed brass blanks including mechanical processing, also on rotary transfer machines. Sintered parts made of sintered bronze, sintered porous brass and stainless steel. Filter elements for air, liquids and fuel made of sintered ball material or mesh.

...Single-stage gearbox with input and output shaft Gearbox type: SN17B Mounting type: Foot-mounted gearbox Output shaft: Solid shaft Additional data: — Input and output shaft in ball bearing — Worms hardened and ground — Worm gears made of special bronze For more information, see the product detail page.

... resistance. The parts are mechanically reworkable. For technical details, please visit the product page on our website! Support material/Carrier material:Self-lubricating sliding material, powder metallurgically produced. Homogeneous microscopic fine dis Static load:≤ 250 N/mm² Dynamic load:≤ 130 N/mm² Sliding speed:≤ 0,4 m/s Friction value:0,10 up to 0,20 µ Temperature strain:-50 up to +350 °C Max. PV-value:1,5 N/mm² x m/s Housing Ø:H7 Bushing inner ø after mounting:According to customer specification (D8 / H8 / H9) Shaft tolerance:To be specified by the client...

... turned parts made of non-ferrous metal Metals or alloys without iron are referred to as non-ferrous metals (short: NE metals). This also includes brass, which we at HKR consider one of our core competencies. However, copper, zinc, or bronze also fall into this category. Due to their special coloration, these materials are also referred to as colored metals. CNC turned parts made of automatic steel...

We are proud to look back on over 70 years of tradition, during which the company has continuously and successfully developed on its own. Our constant aim has been and continues to be to satisfy our customers with high-quality products and to offer suitable solutions even for exceptional requirements and wishes. The experience gained from over half a century of metal bellows technology guarantees ...

...Turned parts Long turned partes, small turned parts Turned, milled and grinded parts Thread inserts in brass, steel and stainless steel Possible materials: Alloy AlCuMgPb, AlZn5,5MgCu etc. Brass CuZn39Pb3, CuZn40Pb2 etc. Stainless steel 1.4301, 1.4305, 1.4571, 1.4401, 1.4101 etc. Steel Machining steel, St52, St37, C45, etc. Special steels Titan, Hastelloy, Copper, Bronze etc...

...AUTOSOL® RUST EX The combination of effective chemicals and selected polishing agents results in a unique formulation for revitalizing heavily corroded metal objects. Corrosion inhibitors prevent attack on non-corroded parts. Economical and easy to use. Ideal for treating large areas of iron, bronze, copper, steel etc. Item number:11 D34250...

...The products of the Rv800 series are used in pneumatics for sound damping. Various designs made of plastic, sintered bronze, and stainless steel are available. Some of these parts can also be used as filters.

...We are your experienced specialist for all turned parts – thanks to state-of-the-art production processes, we manufacture turned parts in almost all sizes. TURNED PARTS FROM THE PROFESSIONAL FOR DRAWING PARTS According to your specifications, we process all machinable materials, including steel, stainless steel, brass, aluminum, and bronze, as well as precious metals and special materials for...

...Our stamping department manufactures stamped strips and parts for a wide range of technical applications. We focus on optimal material usage and select the best manufacturing process and suitable machine for your project. We process all common materials such as: aluminum, bronze, brass, copper, stainless steel, spring steel, cold rolled strip, hot rolled strip... Subsequent surface finishing (e.g., zinc, tin, gold, silver, etc.) or finishing of stamped strips with subsequent separation completes our stamping portfolio. We also offer post-processing services, such as welding pins, in-house.

...Filigree stamped and bent parts of the highest quality is our specialty. Constant quality control of the stamped parts is one of our most important principles. From steel: • rust-resistant spring band steel (1.4310, 1.4404, 1.4301, etc.) • cold strips (ST01/02, etc.) • hot strips • untempered spring band steel • hardened spring band steel (C60 / C67 / C75 / C100) From non-ferrous metals: • beryllium • copper • brass • tin bronze • nickel silver • titanium • nickel • tombak • zinc • and more - please inquire From aluminum: • raw • anodized...

...various further processing options, such as heat treatment and surface treatment, can be applied, ensuring optimal alignment of the parts to the application case at SOP (Start of Production). Application-specific materials used include: Steel/Stainless Steel, Brass, Bronze, Aluminum, Alloy Steels, Spring Steels, as well as special materials according to customer specifications.

...The passages of this model are available with balanced, finely lapped mechanical seals in two versions. The very compact model T06 is equipped with a central spring, featuring a seal pairing of stainless steel against carbon graphite, or stainless steel against bronze. Do not use the rotary passages under maximum operating conditions without prior consultation with ROTOFLUX customer service.

...Bluing of Steel Parts. Bluing layers are black conversion layers formed by chemical, non-electrolytic oxidation of iron in hot alkaline solutions. The resulting layers of iron oxides are environmentally friendly and, due to their low thickness of 1 µm, always maintain the mass of the parts. The visually appealing deep black appearance allows for decorative applications, as well as reducing light...

...and ground versions, but thread milling or thread rolling is still in use. For the nuts, you can choose from our standard options of flange, round, or hex nuts, or we can manufacture according to your specifications. Sliding thread nuts are typically made from bronze or red brass, but other materials such as steel, plastic, or cast iron are also available. You can find our standard options in the catalog on pages 85-87. Stainless steel versions are also possible.

...We have successfully expanded our technical expertise beyond brass, copper, and bronze to include the processing of aluminum. Thanks to optimized process flows, consistently flawless quality is guaranteed at all times.

...Standard frames in rectangular shapes of various sizes from C1-C9 according to ISO standards are delivered just as quickly as the standard frames from the CC, DC, and RC series. All frames can optionally be equipped with steel, sintered bronze, SinterLube® bushings, as well as press-fit columns or removable guide columns for sliding guidance.

...Excenter bushings, guide bushings made of lead bronze, finished through centrifugal casting for stone crushing plants...

...Sheet thicknesses from 0.05 to 2.5 mm, tonnage up to 100 t, tools up to 1250 mm, series starting from 100 pieces Precision Stamping Sheet thicknesses from 0.05 to 2.5 mm Tonnage up to 100 t Tools up to 1250 mm Series starting from 100 pieces Materials Brass, bronze, steel, copper, aluminum Chrome-nickel steel, precious metals Copper-beryllium alloys Nickel-cobalt alloys, titanium diverse plastics (PTFE, PVC) special alloys as needed...

...The Westley Group is a consortium of several companies that offer a complete service in the field of cast parts. We produce centrifugal casting for you in collaboration with Spunalloys – the market leader from the UK – using a variety of simple and flanged centrifugal casting molds, with parts having an outer diameter of up to 2500 mm and a length of up to 4500 mm.

... specifications, such as:  Elastic bearings  Spring elements  Sealing elements  Vibration dampers  Bushings  Buffers  Feet  Rails To determine the spring force, the spring characteristic curve can be measured in our testing laboratory. Connection options:  Rubber-Metal  Rubber-Aluminum  Rubber-Stainless Steel  Rubber-Bronze  Rubber-Brass  Silicone-Metal  Silicone-Stainless Steel...

...SANHA manufactures threaded fittings of the PURAFIT® series from the premium material lead-free silicon bronze CuSi. This copper alloy is ideally suited for use in drinking water installations, as it consistently meets the strict requirements for lead content limits in drinking water. Processors can be assured that by using lead-free PURAFIT® threaded fittings, they will not face any liability...

...CNC turned parts – Long turned parts – Short turned parts – Fasteners – Thread inserts – Shafts – Medical special turned parts – Threaded sleeves – Hose connections – Turn-milled parts – Assemblies – and much more.

...We also manufacture various machines and machine parts. We would be happy to provide you with personal consultation on this matter. Please feel free to reach out to us. You can also send us your inquiry, and we will process it as quickly as possible.

...We manufacture stamped and bent parts according to drawings or samples with material thicknesses ranging from 0.3 mm to 4 mm, using the following materials: Steel, stainless steel, aluminum, copper, brass, and bronze.