pins- metal Germany

... case through soldering, bonding, welding, or screwing. The processing of high-grade steels and novel materials such as titanium and tantalum is part of the service range, as well as the use of technical glasses and high-performance ceramics. In-house surface finishing of the contact pins and/or the outer surfaces of special glass feedthroughs facilitates contacting through soldering, plugging, or...

...D-SUB Standard, solder pin, angled, 9.4 mm, twisted contacts, metal angle Mounting types: — with mounting bracket and internal thread 4-40 UNC or M3 — with mounting bracket, ground clip, and internal thread 4-40 UNC or M3 — Quality level 3 (also available in quality level 1) — Housing: tin-plated steel, optionally tin-plated brass or stainless steel Housing material: tin-plated steel, optionally tin-plated brass or stainless steel Number of poles: 9-, 15-, 25-, 37-, 50-pole. Connection type: straight/angled solder pin, press-fit pin, solder cup, wire wrap, crimp, screw clamp...

...Custom Spring Contact Pins Gebatec develops and manufactures spring contact pins in custom dimensions for specific application cases. Through a special assembly process, we can significantly reduce the costly precious metal surfaces to a minimum. Customize the required spring contact pin to fit your product, not the other way around! Send us a measurement or installation sketch, and we will take care of your special solution.

...Over time, the existing machines have been optimized and special pens have been developed in collaboration with customers. In many cases, the accuracy of turned parts is nearly achieved. A wide variety of materials can be used, particularly NiFe, NiFeCo, CuSn6, CuSn8, nickel silver, brass, Dumet wire, Mumetal, metal alloys, surface-treated wires, diameters ranging from 0.3 to 2.0 mm.

...• low-cost version with threaded pins • high torsional stiffness - flexible • torque range: 0.4 - 8 Nm • shaft diameter: 3 - 24 mm • temperature range: -20 to +90°C Material bellows: stainless steel Material hubs: high-strength aluminum Material threaded pins: DIN 4029 Temperature range: -20°C to +90°C Torque range: 0.4 - 8 Nm Shaft diameter: 3 - 24 mm...

...Nails and pins, screws and nuts, dowels, chains, ropes and cords, angles and wood connectors, construction fittings, door locks and padlocks, furniture technology, rollers and wheels, fittings, hooks You know – the things that always seem to be missing Nails and pins, screws and nuts, dowels, chains, ropes and cords, angles and wood connectors, construction fittings, door locks and padlocks...

...From manual insertion into the tool to full automation. Depending on the quantity and requirements profile. Whether heavy forged parts or 0.7mm thick contact or connector pins. We have the right solution for you when it comes to the combination of plastic and metal. Overmolding, insert molding, outsert molding, the right combination for every application.

... changed or bridged easily. If neccessary, the power consumption and brightness can be optimized as per customer's request. The metal bezel is set on ground. If neccessary, our PCB is prepared for disconnection. In addition to our wide range of alphanumeric modules in standard STN technology, we have recently introduced ...

...PERMABOND A1042 | 50 ml Permabond A1042 is a fast-curing adhesive system that securely and sealably bonds metal parts in a removable manner. Due to its high vibration resistance, Permabond A1042 is an excellent alternative to mechanical fastening methods, such as retaining rings and cotter pins. By using Permabond A1042, corrosion formation on the metal parts being bonded can be reduced. Its good...

... individually or grouped together for a specific operation. In this product area, we offer you a variety of options. - Half Tongs (Picker) - Half Tongs with Guide Pins - Compensation Tongs - Parallel Tongs - Scissor Tongs...

...Contaminated bulk material is cleaned One of the most annoying and expensive problems with bulk material processing is the contamination by foreign substances. These contaminants not only reduce the quality of the final product, they also cause damage to the machines and failures. Especially high-strength small metal parts such as screws, nuts, washers, or cotter pins cause serious damage to the...

... - Pillar clamps - Fruit growing clamps - Holding clamps - Stick fix - Vineyard clamps made from galvanized and heavily galvanized wires. - Staple pins Of course, we also manufacture custom products upon request.

...2m Bushing and Bearing Adhesive is a one-component adhesive that cures with metal contact in the absence of air. It replaces traditional fastening methods such as pins, retaining rings, and washers. Bushing and Bearing Adhesive 2m Bushing and Bearing Adhesive is a one-component adhesive that cures with metal contact in the absence of air. It replaces traditional fastening methods such as pins, retaining rings, and washers. Available in the following package sizes: 50 ml bottle Item No.: 14013 Packaging Unit: 1 piece...

...worm gears and shafts, chain wheels, drive wheels - Bevel gears up to module 6 - Worm shafts up to module 10 - Keyed hub profiles, notch gears - Pinion shafts up to module 10 and 2,500 mm length - Deflection drums - Grooves up to 32 mm width and 250 mm length - Crushing tools for the hard stone and recycling industry - Material usage In addition to classic metal materials, we can also process numerous special materials: - Polyamide, Delrin, laminated press material - Aluminum, bronze, brass - Stainless steel - Cast iron - Special alloys...

... of capillary-tubes are needed. These special tubes are glasses, which are adjusted to the physical parameters of the metals. We draw and cut such capillaries precisely to final size. Thereby the glasses can be fused on the customers wires and pins, which are made of metal. Scatter discs for the endoscopy Glass rings in different sizes with two satin cut sides, allow to manufacture small ring lightings for example for the endoscopy. By means of the rough surfaces of the glass rings, the light, coupled on the back, is refracted and diffusely spread. Different diameters and thicknesses as...

...Simple wave joints according to military standard MIL-J-6193. Construction with sliding bearings similar to the leveler joint. Blind holes at the fork ends. Zinc or cadmium coating of exposed metal parts. Outer diameter 9.5-38.1mm (0.38"-1.50") Continuous operating torque 3.4-245.8 Breaking torque 22.6-1638Nm Operating speed up to 1000 RPM (dependent on lubrication) Operating angle up to 35° Minimal play Regular lubrication required. Alternatively, bellows filled with grease can be used. Material for forks: steel, hardened and ground. Material for pins & cubes: steel, hardened and ground.

... Clip pin welding pins DN 2.7 mm, clip DN 30 mm Pin copper-plated steel / clip galvanized steel Pin stainless steel / clip galvanized steel Welding rate: 15–20 pins / min Power source: Capacitor 100,000 µF Mains connection: 100 V to 230 V 50/60 Hz 10 AT Battery operation: 25.2 V Battery capacity: approx. 400 pins Dimensions and weight: 365x190x240 mm (LxWxH); 12 kg (sturdy sheet metal housing)...

...Device details: ■ Preparation of cable samples for further processing ■ Applicable for cable types with solid core cross-sections ■ E.g. Sample preparation for cutting with ORC family Size (width x length x height):170 x 360 x 450 mm 6.7 x 14.2 x 17.7 " Weight:15,6 kg / 34.4 lbs Material:Iron, Stainless steel Equipment:Metal ring underlays, Metal pins...

The name emico is a registered trademark. Under this brand, standard and norm parts as well as fasteners made of plastic and metal are known. Founded in 1991, it has grown into a wholesaler with more than 20,000 different items to this day. A large inventory of standard parts, such as drive pins, rivets, cable ties and accessories, screw locks, insulating sleeves, washers and spacers, caps and...

... limiters, overload clutches, tension measurement systems, force transducers, three-phase winders, three-phase voltage regulators, switchgear, automation technology, winding technology, plant modernization, electronics manufacturing, tension measurement bearings, tension measurement stations, measurement bearing pins, force transducers, torque transducers, measurement amplifiers, measurement...

...Swarovski chatons, Swarovski glass beads, Swarovski buttons, Swarovski shaped stones, Swarovski sew-on stones, Swarovski decorative stones, spindle press for Swarovski chaton rhinestones, rhinestone pliers for Swarovski chaton rhinestones, metal beads, sew-on stones, Swarovski rhinestone pins, set chatons for sewing, Swarovski crystal buttons, sequins for sewing, sequin bowls for sewing, sequin trims for sewing, rhinestones for sewing from Starbright, lingerie, corsets, belts, thongs, Swarovski tattoos, zippers, wires, threads, leather cords, brooches, jewelry stones.

Since 1993, we have been manufacturing machine components and assemblies from all machinable materials, ranging from simple construction steel to plastics and even titanium. Our services include, among others, operations such as turning, milling, grinding, honing, polishing, and hardening, as well as finishing processes like anodizing, bluing, and coating. Assembly of our products is also part of ...

... to qualified subcontractors. Our product range includes DIN items, special screws, turned parts according to drawings, bolts, threaded pins, bushings, pistons, sleeves, nuts, dowel pins, and turned parts with fits. Each of these products is manufactured with the highest precision to meet the individual requirements of our customers. With a dedicated team of 10 employees, we are able to respond flexibly and quickly to the needs of our customers. Our main delivery areas are Germany and Switzerland, where we are known as a reliable partner.

Machine and metal construction: production of individual parts and small series, development of machines, fixtures, and special tools, prototype construction...

The company IMV-Reinhardt (Industrielle Metallverarbeitung) is based in Großeibstadt. The business has been operating since July 2016 under the leadership of owner Benjamin Reinhardt. We have several years of experience with a wide range of products, materials, as well as the machines, tools, and measuring instruments needed for production. Through regular contact with renowned manufacturers of to...

The company BERLINER SCHRAUBEN GmbH & Co KG is a renowned trading company for fastening systems, mechanical fasteners, and tools for professional use. Our company, certified according to DIN EN ISO 9001:2008, was founded in 1947 and has expanded its market position over the years through continuous growth. Today, we are part of the OTTO ROTH group and are also available for our customers at the br...

... well-stocked sales rooms. Our product portfolio includes, among others: ▪ Patches ▪ Pins ▪ Bandanas ▪ Leather belts ▪ Leather bracelets ▪ Necklaces ▪ Bags ▪ Caps ▪ Biker accessories ▪ Overknees ▪ Flags ▪ Posters ▪ T-shirts ▪ Sweatshirts ▪ Scarves ▪ and much more! Of course, due to our experience and contacts, we can also carry out extensive contract productions for you. We would be happy to provide you with a non-binding offer and assist you in realizing your fan or fashion item. Questions? Contact us.

...draw-in jaws, draw-in rollers, deburring rollers, facet bushings, bevel cores, bevel punches, finishing plungers, flow press inserts, flow press matrices, flow press punch holders, form punches, guide sleeves, die inserts, holding matrices, carbide precision parts, carbide tools, spacers, calibration pins, calibration matrices, head stroke matrices, head punch holders, head punch inserts, ball...

We are a medium-sized, owner-managed company based in Saxony, successfully operating as a contract manufacturer of complex small and large turned parts since 2004. The specific requirements and wishes of our customers from general mechanical and plant engineering are the most important demands on our company. Modern machine systems and facilities, combined with the experience and high commitment o...

Stainless Steel Screws Online Shop - Trading in stainless steel fasteners, stainless steel screws, stainless steel bolts, nuts, pins, washers. rust-resistant, V2A, V4A.