coating materials Germany

... design to tooling to series production for you? An experienced and competent solution provider who understands how to implement your requirements quickly, flexibly, on short notice, and from a single source? Then you are at the right place with Reinle Rubber & Plastics. With our modern computer-controlled laminating and coating machines, we can process a variety of materials and deliver virtually any quantity you need. Whether small or large series – we can meet your specifications. Expert and targeted advice included. We look forward to your...

...Through our in-house coating facility, we can deliver profiles with various Renolit films on short notice. By service, we mean that standard Renolit films are available from stock, and special films can be delivered as quickly as possible after scheduling. With our coating facility, we can coat a wide range of blanks with different decorative materials using the hot-melt process, such as plastic...

...Steel Plates – Technical Specifications 1) Most Common Geometry: Rectangular steel plates are the most frequently used. 2) Thickness [mm], Width [mm], Length [mm]: Typical thicknesses range from 3 mm to 100 mm, widths from 1000 mm to 2500 mm, and lengths from 2000 mm to 6000 mm. 3) Materials: Common materials include S235, S355, and 1.4301 (stainless steel). 4) Applications: Steel plates are used in mechanical engineering, construction, vehicle manufacturing, and steel construction. The specific requirements depend on individual customer needs and application conditions.

Technical design, delivery, and installation of building bearings, machine bearings for protection against shocks and vibrations.

... e.g. in restaurants and public buildings Facilities that cannot be drained using natural gradient As protection from backwater damage Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One tank with separator system Two centrifugal pumps and motors according to type and operating location required Two non-return valves AWASTOP DN 100 K Two pressure pipe gate valves DN 100 Level measurement LGA certified according to DIN EN 12050-1 /. -4 Tank:G-AI Si12 (Alu 230) Coating:Acrylic combination paint coating...

... use of the Corona or Tribo coating system is determined during the optimization of the part to be coated. We permanently have in stock for you: Primer powders for coating aluminum, steel, and other materials Functional powders for corrosion protection, heat protection, etc. Coating powders in nearly all RAL color shades Coating powders for various special colors Materials for various effects and structures in the coating...

...punctures, contact with biological materials, as well as very high temperatures. Appropriate safety gloves must be used for protection and care. It is necessary to use safety gloves to prevent injuries to fingers. The Ronix RH-9010 Nitrile Safety Glove is one of these types of gloves. A special nitrile coating is used for the palm and finger parts of the gloves which makes your grip easy and at the same time maintains all tactile senses. This glove is abrasion resistance, durable, highly elastic, and allergen-free. Model:RH-9010 Material:Polyester + Nitril Coated...

... excellent material for garden furniture because it has a durable structure and is rust-proof. The special electrostatic powder coating used on exterior facades is preferred because of its adaptability to all weather conditions and its long-term use. The edges of the aluminum are rounded and the corner points are curved.

... creates and adhesive film which has a high hot tack. Due to this it is easier to achieve great bonds and to print at higher speeds. It shows good adhesion on many materials, which makes it a great adhesive to skip cleaning the coating equipment. It can be used well with toner-based prints. This adhesive is great for heat transfer printing onto cosmetic packaging as well as promotional like pens. It shows good resistance against water. Furthermore, the particles in this dispersion are fine dispersed and result in even and repeatable results.

...In addition to sputtering processes or galvanic processes, thermal evaporation is often used for coating as well. Since the raw materials heated in this process have a decisive influence on the results, their quality must receive special attention. To meet the high demands of our customers, we evaluate this product group according to the same strict quality parameters as our targets. This guarantees you the highest material purity, excellent microstructure, and homogeneity. Standard materials: Au 99.99%; Ag 99.99%; Pt 99.95%...

... utilizes state-of-the-art program-controlled systems in this area. The various systems can meet a wide range of requirements. Series or larger individual parts are galvanized on a rack system. For cost-effective manufacturing of small parts and bulk materials, several drum machines are available. Process: Zinc Thick Layer Passivation...

... holes, and cutouts can be punched into the profiles. Bending and folding according to your angle specifications. Powder coating in RAL and DB colors is possible. Galvanic or hot-dip galvanizing is available. From custom fabrications to large series production. U-profiles, Z-profiles, hat profiles, corner profiles, angle profiles, etc.

...","Continuous Casting","Hot Rolling","Wires and Bars"],"Construction Materials":["Cement Plant – Continuous control of rotary kilns","Gypsum Boards (Drywall)","Asphalt"],"Paper Industry":["Paper Mill – Pulp","Cardboard Production","Paper Drying","Coating and Extrusion Lamination"],"Glass Industry":["Flat Glass – Float Glass","Tempering of Flat Glass","Automotive Glass – Forming and Laminating Windshields"]}}...

...Compact Plates: - Base material pressed layer materials under high pressure - Coating laminate - Plate thickness 12 mm - Colors Maple, Beige, Beech, Light Grey, Teak, White - Hygienically safe for contact with food, easy to clean Available options: - Decor tabletop - Tabletop diameter We offer you the following quantity discounts: from 10 pieces 3% | from 30 pieces 5% | from 50 pieces 7% | from 100 pieces 10% For larger quantities, please ask us for a special discount! Sizes: Ø 49 cm to Ø 119 cm...

... bulk materials, Forbo Movement Systems provides structured or profiled transport belts. - Low elongation: short tension paths, cost-saving - Flexible in longitudinal direction: small deflection diameters, energy-saving - Dimensionally stable: reliable operation and maintenance-free - Low noise during operation: humane working conditions - Durable: economical operation - Lightweight with low overall thickness: easy handling/commissioning, cost-saving design...

... according to ADR/RID. Depending on the radiation intensity, we manufacture our tanks with double walls or with a lead-sandwich coating. At our production site, we also produce all standard containers, from small containers with a capacity of 450 liters to 20'-ISO containers. Our customers rely on the consistently high quality of our noble, shielding, and high-security tanks, as well as on our flexibility and professionalism in realizing individual requests.

... can be integrated into the production process • Increased wear resistance through coating is possible • Test certificate from the FRENCO measuring laboratory is included in the delivery Various steels are available as base materials for master gears. The wear resistance increases from gauge steel LS to chrome steel CS to powder high-speed steel SX. Coatings enhance wear resistance and also serve as corrosion protection. Regrinding of Master Gears...

... to 6,000 mm in the following cross-sections: • Round tubes: tube cross-section 15 to 140 mm • Square tubes: tube cross-section 15 to 140 mm • Rectangular and oval cross-section with a circumscribed circle max. 170 mm • Minimum size side: 20 mm • Maximum size side: 140 mm • Wall thickness 1 to 4 mm, depending on nitrogen or oxygen The materials to be processed are laser cut with nitrogen. The advantage of this method is that no slag layer is formed during laser cutting, which would later be unsuitable for powder coating. However, laser cutting with oxygen is also...

...Thanks to the dense, pointed rasp tooth geometry and a friction-reducing special coating, demanding milling geometries can be machined even with highly abrasive materials.

...these shock absorbers allow for smooth and safe deceleration of large energies of up to 903,879 Nm per cycle. These models are equipped with an internal, air-filled bladder accumulator instead of a mechanical spring return, making them overall shorter and lighter. The galvanized outer components provide improved surface protection. For applications in highly corrosive environments, we offer special piston rod materials and a special epoxy coating. All Enidine hydraulic high-performance shock absorbers comply with OSHA, AISE,...

... these transport devices. 1. Product Portfolio • Transport frames • Wire boxes • Storage containers • Roll containers • Load carriers 2. Wire Types • Bare wire 3. Wire Diameter • Standard versions from 3.0 - 6.0 mm 4. Wire Mesh Dimensions • e.g. External dimensions of 300x300 mm - 3,000x1,000 mm • e.g. Mesh sizes of 30x30 - 100x100 mm 5. Processing Options • Frame mesh • Double wires • Combination with flat iron and profiles • Notching, edging, crimping • Hot-dip galvanizing • Powder coating Bare Wire: EN 10016 or EN 10025 Bare Wire: B500A+G or B500A+P according to DIN 488...

... areas: - Office machines - IT systems - Textile machines - Woodworking machines - Machine tools - Printing machines - Pumps - Compressors - Construction machinery Antistatic timing belts: antistatic coating, antistatic PU mixture Coated timing belts: materials available for various transport purposes Brush timing belts: for transporting glass, ceramics, or paper Flat belts F: F / AF / BF / CF / DF...

...Our ACP Group offers over 400 different variants of stamped and lanced metal carriers. These carriers are used in a wide variety of sealing systems. Only high-quality raw materials such as steel, aluminium and stainless steel from certified suppliers are used for production. The Huehoco Group also offers a wide range of coating options. From functional to decorative coatings, our customers can choose from a wide range of products. We offer suitable bonding agents for almost all types of rubber and plastic compounds.

...We offer a wide range of rollers and wheels in various materials. You can choose whether you would like us to provide a complete roller or a new coating. You have the option of rubber, PU, silicone, and cellular materials.

...Contract coating of your wooden products. We paint, sand, and dry your furniture parts, etc. Furniture fronts, veneered components, and more. We coat your rod profiles and flat components upon request according to customer specifications. We process the most common types of wood, wood materials, and paints.

... silicone-metal connections, we can draw on a vast wealth of experience. Depending on the definition or the specific application purpose of the customer, we orient ourselves to the coating process. The different initial states of the coating materials (liquid/solvent/solid) determine which method is used. We apply the materials to the components through dipping, brushing, rolling, spraying, thermal spraying, and phosphating.

...Titanium nitride coating (TiN) has long been a proven standard coating type in our portfolio due to its balanced properties. The visually appealing gold-colored titanium nitride layer is characterized by: high hardness and adhesion strength good chemical resistance good temperature resistance relatively low thermal conductivity biocompatibility and food safety It is used in milling, turning, drilling, and cutting tools for the machining of ferrous metals and steel materials, especially for tools that are exposed to high abrasive wear.

... crucibles. For continuous needs, we supply you based on framework agreements Just-in-Time. Available Components: Evaporation Crucibles, Evaporation Boats, Crucible Inserts, Heating Filaments, Evaporator Coils, Sputter Targets, Back Plates, Nozzles, Masks, etc. Typical Materials: Molybdenum, Tungsten, Tantalum, Niobium, Hafnium, Zirconium...

...HyProtect™ is an ultra-thin plasma coating that protects surfaces from bacterial contamination. It is a composite layer made of pure metallic silver and polysiloxane. - Ultra-thin coating - Long-lasting antimicrobial effectiveness even against multi-resistant germs - No cytotoxicity - High biocompatibility - Customizable for different materials - Gamma sterilizable - Patented BG technology "Made in Germany"...

...nature, black, coming soon: blue and red The goal of surface finishing and coating at Buchert + Feil is to implement the optimal functional and design solution for every surface in outstanding quality. Washing systems according to the latest industrial standards, as well as extensive acceptance, testing, and quality assurance procedures, complete the portfolio. Solid craftsmanship combined with consistent digitalization enables efficient, high-quality production with short, reliable delivery times.