surface test Germany

... according to DIN 912.","Note":"All socket drill bushes are labeled on the upper flange surface with the hole size and fit size, e.g., 15 F7.","Material":"Special application steel.","Hardness":"780 ±40 HV 10","E2":"Distance between holes when using cylinder pins or spiral tension pins.","Diameter":"For diameter D1 over 15 mm, the increments are 0.5 mm."}...

... support table features a continuously closed, stable surface. Mattresses can be tested lengthwise and crosswise. The test specimen is secured against slipping with side support profiles. The support profiles can be flipped and used with a support height of 50mm or 70mm, depending on the height of the test specimen.

... measuring receivers in the range of about 100 kHz to several MHz. The lower measurement threshold is rarely below 50 pC (pico Coulomb), even in shielded measuring locations due to disturbances. With the help of the TE filter, a partial discharge level of ≤ 10 pC can be achieved with the correct setup of the test field. This is necessary, for example, to operate test fields for transformers. The permissible partial discharge level depends on the power class of the transformer.

... 1500 V Max. String Fuse 25 A Max. Snow Load 6000 N/m² Hail Resistance Class HW 3 (30 mm at 23.9 m/s) Application Class A Protection Class II Standards IEC/EN 61215, IEC/EN 61730 Salt Mist Test IEC/EN 61701 I + II...

... thermocouple Ultrafast response, single strand and PTFE coated Minimal thermal mass – ideal for small items or plastics EXPOSED-JUNCTION thermocouples for use on test pieces that are left permanently rigged Attached to the substrate by spot welding, soldering, use of high-temp tape or screw EXPOSED-JUNCTION THERMOCOUPLE – HIGH-TEMPERATURE featuring a glass-fiber cable Attached to the...

...With the production of prototypes, you have the opportunity to test and, if necessary, adjust the functionality of your components before commissioning costly automated tools. The Alfred Weigel Spring Factory is capable of implementing such custom solutions quickly and cost-effectively. Special Features • Small series with support in product development • Component assembly • Various options...

... the salt spray test, which is conducted according to DIN 9227 standards, of 504 hours. The coating process is characterized by its environmental friendliness, as the excess powder is recovered and reused. Technological limits: 2500 x 800 x 1,500 mm (LxWxH) Straight profiles up to a total length of 3000 mm...

... decks, balconies, terraces, hotel entrances, etc. can also be easily and quickly equipped with a new Plastifloor® floor coating. For those who have high demands for their industrial flooring, such as impact resistance, high mechanical loads, hygienic surfaces, and still do not want to compromise on aesthetics, should take a closer look at the following pages. Technical data and a variety of current references, as well as test certificates, are provided here.

...Abrasion Resistance - Color Fastness Test Determination of the color fastness of a product through dry and wet rubbing. Scrub Resistance - Micro Scratch Resistance Determination of the relative gloss change in relation to the initial gloss level. Scratch Resistance | Scratch Test | Scratch Examination A Yes/No test to see if a scratch tool damages the surface at a predefined force. Or as a test...

CET-Co is an independent and cooperative engineering firm specializing in the development and construction of sugar factory facilities and processes. CET-Co is an international company led by experienced sugar factory engineers and technologists who know the entire sugar production process firsthand. CET-Co is a trading and cooperation company for the sale of: - Used and new machinery for the su...

...Test chambers for combination with dynamic shaker systems Combined testing under the influence of vibration, temperature, and humidity enhances the test loads. Vibration tests are often conducted on electrodynamic vibration exciters (shaker systems) to additionally achieve mechanical stress on the test units. The clamping surface of your shaker system and the geometry of your test parts determine the usable space of our temperature and climate vibration test chambers.

...diamond marking paste, blue | 80 ml tube Blue marking paste for surface inspection. This paste is applied to the workpiece being inspected and is used to identify irregularities by filling in grooves and sanding marks, allowing conclusions to be drawn about the surface quality based on the resulting contrast. Furthermore, a surface inspection can also be performed between two fitting parts. This paste can be easily removed with the high-performance cleaner diamond R16. Temperature range: -10 to + EAN: 4016509600258 ml: 80...

...Our laboratory, equipped with the latest technological capabilities, continuously monitors production and quality, and is also certified by external auditors. We are happy to provide customer-specific test certificates.

...Used to detect open irregularities (finest cracks and pores) towards the test surface. To verify the quality of our electron beam processes on the treated components, we offer various non-destructive and destructive testing methods. Our qualified testing personnel is certified according to DIN EN 473 / DIN EN ISO 9712 Level II and is also approved for penetrant testing according to DIN EN 4179 (Aerospace) Level II.

...Manufacturing of all mechanical individual parts, surface coating - galvanically zinc-plated, guide bushings - black anodized, assembly of units with spindle drive.

... and testing facilities: - Camera systems including image processing: part recognition, position determination, color and surface inspection, damage image detection - Optical, tactile, and ultrasonic testing of sensors and displacement measurement systems - Pressure and density testing - Level control and level monitoring - Rotational properties and roundness accuracy - Measurement of tooth flank...

... according to Fischer, flowability according to Imse) 8. Determination of bulk, tapped, and loose density 9. Specific surface tests (BET theory, Blaine) 10. Density determinations (helium pycnometer) 11. Float-sink analyses with heavy liquid Additional analytical options: 1. X-ray fluorescence analyzer (Niton) 2. Laser granulometer (Sympatec) 3. X-ray diffractometry (Siemens)...

...Micro bending, micro polishing, 2D electro-polishing, nano-coating, contract measurement of small parts, deburring For our laser cuts, we offer various post-processing options: surface treatment, deburring of cut edges, glass bead blasting, bending, measurement services, creation of test protocols, and first article inspection reports.

... - Localization of contour deviations, e.g., from freeform surfaces - Surface point statistics - Graphical evaluation on the CAD model - Roundness testing of circles - Measurement protocol - Technical specifications Measurement range: 1.8m Measurement volume: 3m² Single point ball test: 0.008mm Measurement uncertainty: 0.023mm CAD interfaces: IGES, STL...

... services include the complete organization and production of assembly kits or finished assemblies – assembled and tested. A team of qualified professionals meets every requirement. For a decade, we have been a recognized manufacturer of system assemblies in the fields of mechanics, pneumatics, hydraulics, and electrical engineering. Our flexible approach to your requirements allows for the customization of standardized testing processes, such as functional tests on test benches. Benefit from a powerful partnership.

...Professional Custom Solutions: IKS specializes in the cooling of products and tools. Key factors for the design, layout, and construction of such cooling systems include various data: • Type of product/tool (material, size, surface) • Existing cooling time • Cooling curves • Cycle time IKS has been collaborating with universities and research institutions for years. Application-oriented test series are conducted in cooperation. Your benefit: Custom manufacturing according to specified performance parameters.

...T30 Brand and Smoke Protection Doors • Single and double-leaf solid doors optionally with F30 vision panel. • Leaf widths single-leaf up to 130 cm; double-leaf up to 249 cm. • Leaf heights up to 249 cm, with top panel up to 350 cm. • Suitable for wooden frames, block and flush frames, steel frames. • Custom wood selection or opaque colored coating. • Surface applications such as decorative strips, panel fillings. • Various wall connections. • Sound insulation requirements up to 42 dB. • Test certificate License Hoba Z-6.20-1962...

...Seal Surface Cutter Guide Sleeve Handle Test Pin Thread Cleaner Hex Key Marking Paint...

...Used to detect inhomogeneities and misalignments of all kinds throughout the entire cross-section as well as on the surfaces of test objects made from sound-conductive materials. The method is based on the interaction between an ultrasound pulse introduced into the test specimen and its reflection, shadowing, refraction, or attenuation upon encountering interfaces, inclusions, or the surface of...

... production costs for the manufacturer. Conversely, a panel that is too light often lacks sufficient quality characteristics. Advantages at a glance • Optimization of material usage • Control of material distribution • Fast traversal - immediate, strip-shaped cross-sectional measurement to intervene directly in the production process • Longitudinal profile measurement to detect systematic scattering errors, longitudinal/crosswise • Automatic calibration with homogeneous test bodies for the best measurement quality • On-site operation via TOUCH...

... measurement data The test specimen is placed in a separate roughness measuring device and the surface is scanned (Correlation of roughness measurement to commutator measurement) Properties: Measurement results displayed clearly as graphics with color change Quick change of test specimens by swinging out the measuring carriage Easy setup of fixtures, stops, and measuring probes...

...In our own testing laboratory, we assess the magnetic properties of individual magnets as well as the products containing them, and we also test the strength of adhesive bonds. For dimensional control, we have a coordinate measuring machine (CMM), and we perform balancing on our own balancing machine. We are capable of designing or optimizing the most suitable solution using the finite element method (FEM).

...Precise recovery of all drugs-of-abuse Ensure safe collection, absorption and release of samples with our drugs-of-abuse media. Tailored with customized wicking and absorption properties, along with the ability to be shaped and flavored, our drugs-of-abuse media: Deliver precise recovery – Customized surface energy reduces oral viscosity to enhance test sensitivity. Reduce test cost – Minimal use...

... equipment manufacturing, electrical industry, and automotive industry. Our goal is to provide you with a quality that precisely meets your requirements. The delivery options for profiles are: - Profiles starting from 80 g/m and a minimum wall thickness of 0.8 mm - Alloys EN-AW-6060, 6063, 6005 A, and 6082 - Strengths from F13 to F31 - Factory test certificates can be issued upon request - Mechanically processed profiles - Anodized profiles - Powder-coated profiles - Assembly manufacturing from aluminum profile components...

... negative bacteria when tested by the recognised ISO 22196 test method. They are effective against MRSA, E-Coli, Pseudomonas Aeroginosa and Salmonella and many other harmful bacteria. Some bacteria can also adversely affect everyday products causing stains, embrittlement, odours and product deterioration. Dryflex antimicrobial TPE can help to prevent these issues and extend the service life of the finished product. As the antimicrobial treatment is formulated into the compound at the time of manufacture; the antimicrobial activity is consistent throughout the TPE and not solely on the surface. Pe...