operating system Germany

...5-pole LCD plain text display Thermal and electrical monitoring of the motor Manual – 0 – Automatic function Pump switch-off through time or switch-off point Acknowledgement button Operating hours counter Ammeter Electronic monitoring of the motor current Forced pump switch-on Variable graduated start-up (switch-on delay) Internal acoustic alarm Collective fault message potential-free and...

... suspension cranes:Cost-effective implementation, Modular system design, Smooth and reliable handling KBK overhung and extending cranes:Variable overhang for inaccessible areas KBK cranes for manipulators:Optimum ergonomic load handling, High operating speeds KBK suspension monorails:complex installations, load capacities up to 3,200 kg KBK Pillar and wall-mounted slewing jibs:Light and fast load handling, load capacities up to 10,000 kg KBK stacker cranes:Specialized handling equipment for stores and factories KBK portal cranes:Mobile workplace cranes – for loads up to 3,200 kg...

... taste impairments - Low maintenance operation - Low operating costs Please contact us for comprehensive and targeted advice: Email: uv-technology@purion.de Phone: +49 3682 479087 Throughput: 2500 l/h UVC Transmission: 90% T1 cm Water Temperature: 2°C - 40°C Connection External Thread: R 1" Dimensions (L x Ø in mm): 930 x 50 Flange Distance: 790 mm Weight: 4.0 kg Lamp Lifespan: 10,000 h Dose: 400 J/m² Max Operating Pressure: 10 bar Enclosure Protection Class: IP 65 Electrical Connection: 110-240 V 50/60 Hz or 24 V DC Power: 36 W Fuse: 10 A...

...The pumps are designed for sampling from groundwater, have a maximum outer diameter of 44 mm, and can even be used in 2-inch sampling tubes. The pumps are sampling pumps; they are not suitable for continuous operation. The maximum operating time for 12 V pumps is 30 minutes, followed by a 30-minute cooling period; for 24 V pumps, the maximum is 5 minutes, followed by a 10-minute cooling period...

...The eurolaser M-1200 laser cutting machine for textiles is a compact model with a working area of 1230 x 1330 mm. Like all other eurolaser machines, operating costs are significantly reduced thanks to the sealed laser technology and interchangeable modules. A cost-effective investment. Working area (width x length): 1330 mm x 1230 mm (52.3" x 48.4") External dimensions (width x length x height...

...The Gronemeyer continuously operating spiral system cools, ferments or freezes general cargo and bulk goods. The products are transported on a plastic mat conveyor chain. The chain is wound around one or two rotating towers in a spiral. The design of the machine permits the handling of unpackaged food. The products' discharge temperature can be changed by adjusting the throughput time and/or the...

... measurement range: -100 °C to 1,370 °C Connections: USB or Bluetooth standard Max. operating temperature: Up to 110 °C Number of measurement channels: 10 or 20 Storage capacity: Up to 3.6 million data points Measurement interval: 0.1 s to 50 min Data logger accuracy: ±0.3 °C Battery type: Lithium, rechargeable NiMH, Alkaline-Manganese Heat protection container – retention time at 150 °C: Up to 250 hours...

... highly precise device with an extremely long service life and low pulsation. The quiet and rotatory operating micro annular gear pump allows dispensing smallest volumes of liquid on the one hand,... Pumps: mzr-2521, mzr-2921, mzr-4622 Flow rate range (without control): up to 72 ml/min * Controlled flow rate range: 1 - 1,000 µl/min * Dosing volume: beginning from 1 µl Precision CV: < 1...

...The Compacta 5022 LT/Trend/EMS series of film packaging machines is suitable for fully automatic packaging. Operating inline, these light barrier-controlled packaging machines can be fed both manually and fully automatically. The film packaging machine produces a three-sided sealed package in conjunction with a semi-tubular film. With the well-thought-out packaging system and the associated...

...The ECKOLD Kraftformer KF 470 Medium - the forming machine for stretching, compressing, reshaping, flanging, smoothing, clamping, arching (bulging), and straightening. The electronic display of the control system visualizes operating functions, error diagnosis, and maintenance intervals. Programmable processing programs allow for repeatable results. The KF 470 is particularly well-suited for...

...Different form factors offer different ways to accommodate the computer hardware. In the 19" format, installation in measuring cabinets is no problem. Other form factors offer the option of mounting the PC directly to the back of a monitor. Network switches integrated into the PC hardware provide additional flexibility and clarity when setting up and operating complex measurement systems.

... of only 800g, including the collimator and side shielding. The ergonomic shape of the device ensures comfortable handling by the operating physician. The gamma camera can be used directly on the patient during surgery when equipped with a sterile cover. The camera system consists of the camera head and a PC-based control and display unit for DICOM-compliant image processing.

...The DMK 456 pressure transmitter has been developed for measuring system pressures and levels in containers and is certified for applications in shipbuilding and offshore environments. Its robust stainless steel field housing and use in Ex areas (temperature class T6) allow for the measurement of various aggressive gases and liquids under extreme operating conditions. The basis of the DMK 456 is...

... successfully used Siegling Transtex for years when typical lightweight conveyor belts reach their performance limits. They have also proven effective in transporting raw materials, heavy pieces, sharp-edged parts, and under harsh production conditions. For many applications, Siegling Transtex now offers the suitable alternative with all the advantages of fabric-based conveyor belts: – easy endless splicing – low energy consumption – simple system design – low maintenance and upkeep costs...

... Width 83.00 mm Layup Number of Cells 120 Number of Cell Strings 6 Number of Cells per String 20 Cell Division Half-cut Cross Contact Color Silver Busbars Color Silver Laminated Structure Optics Classic Laminated Structure Glass-Glass Glass Type Fjord Glass Surface AR Color of Cell Interspace White Connection Technology Connector Type Stäubli MC4-Evo2 Operating Conditions Max. System Voltage IEC...

... impacts. The measurement output is digital via an I²C interface, with the address being customer-specific. Thanks to the bus capability of the interface, combining multiple sensors within a system is easily achievable. Measurement range:: 0...80% rH, 80 - 100% rH (short-term); -40..+100°C Accuracy:: +/- 1.8% rH in the range of 10..80% rH; +/- 0.2% rH in the range of 0..10% rH; +/- 0.2° C in the range of 0..60°C Operating pressure:: max. 150 bar...

...BME BauMaschinen Ersatzteile is a Europewide operating company. Our core competence is the distribution of highquality (OEM) system solutions, accessories and spare parts for machines in the construction industry. The satisfaction of our customers is a daily driving factor for us. Our central corporate objective is to provide added value through our service to major customers, small and...

...The winding material is slid onto a ball-bearing central shaft. Please note the following points: The central shaft is completely removed from the bearings, and the cone opposite the brake system is pulled off (loosen the screw beforehand). Subsequently, the spool and the cone are slid on. The central shaft is placed into the two lower bearing shells. After that, the bearing flaps are closed, and the screw of the cone is tightened again. Corrosion-prone parts are treated galvanically to achieve the longest possible lifespan even under the most severe operating conditions.

... place particular emphasis on the simplicity of operating these systems. The network operator, rather than the homeowner, will be able to monitor and control the system. This results in numerous advantages regarding control and network transparency. Through our research and development activities in this field, we are taking innovative approaches to Smart Grid and Smart Metering.

... TPUKF1: cold flexible, operating range from -25°C to 5°C, steel cord tension carrier Material TPUST1: standard material, with steel tension carriers Tooth profiles: ATN10, ATN12.7, ATN20, ATNS20, ATN10K6, ATN12.7K6...

...The evaporation capacity is up to approximately 300 kg/h, depending on operating conditions. Built on a skid and transportable by truck. Design: Evaporation crystallizer with external heating element and recirculation system, as well as a vacuum system consisting of 2 surface condensers, a steam ejector, and a vacuum pump. Standalone small control system, touch control panel, control cabinet, measuring instruments, control valves, wiring, etc.

... features: IP67 (NEMA 4) housing that guarantees long-term thermal imaging in the harshest environments (air purge and other accessories available) Simultaneous infrared and visible sighting Measurement Accuracy:±2°C or ±2°% (reading) Models:9 or 60 Hz Field of View:Horizontal 34º x 25.5º Spectral range:8 - 14 μm Detector:Uncooled focal plane array Operating Temperature:-10 to 50°C (14 to 122°F) Storage Temperature:-20 to 50°C (-4 to 122°F) Humidity:10 to 95% non-condensing Environmental Protection:IP67 (NEMA 4) Weight:Approximately 1.08kg (2.38lbs)...

... with yellow indicator lamp Additional operating buttons, opposite to terminal (Start/Stop/Emergency Stop) DAT 'Direct-Access-Technology' The exclusive eject function avoids strap jam Upstream and downstream interlocks EPP 'Exact Product Path' Conveyor speed steplessly adjustable GreenTech energy concept, low power consumption MFT 'Mono-Frame-Technology' OPTIONAL: Stacker adapter for existing stacker Bundle stops, no contact with bundle when clearing the bundle, with quick adjustment Bundle press Protection covers at feed and discharge side, hinged Lateral bundle guide, adjustable Side...

...-axis travel: 500 mm Z-axis travel: 450 mm Spindle distance: 450 mm Rapid traverse XY Z axis 60,000mm/min 2 x motor milling spindle GMN, version with HSK63 tool holder Drive power (S1/S6) 28 KW (constant) Torque (S1/S6) 63/83 Nm max. speed 16,000 rpm Spindle distance 450mm Chip conveyor Knoll (scratch belt conveyor in positioning variant across the machine) High-quality Knoll KSS system with fine filtration Flush gun Complete enclosure Tool storage (2 x 50 tools) Operating voltage 400V 3N ~ Control voltage 24V DC Connection value machine approx. 72 KVA Compressed air connection 6 bar...

...this version would grow and continuously receive new features over time. Simply put: Microsoft Windows 10 Pro is an operating system that improves over time. The developers kept their promise: Windows 10 was released in all its editions in July 2015 and has since gained numerous new capabilities through several major updates. The Key Features of Microsoft Windows 10 Professional at a Glance Cortana as a Voice Assistant...

... III, Modbus, digital I/O (PNP, NPN) USB 3.0 for fast storage of inspection and error images Operating philosophy of the pictor® series and flexibility of an embedded solution When using a gateway, PROFIBUS, Profinet, EtherCAT, EtherNet/IP, Ethernet POWERLINK can be utilized...

...Application: •dry air purification: airborne dusts such as asbestos, dust, mineral wool, mold and fungal spores, microorganisms, construction debris, quartz, flour, and wood dust •for cleaning air ducts and dust extraction •for vacuum generation in the operating room •health-hazardous fine dusts of category 3 (TRGS 521) •maximum airflow without filter 4190 m³/h •filter classes G4, F7, EU 7-8 filters •HEPA 14 filter system capable of 3100 m³/h...

... operating costs. High quality engraving Accurate contrast adjustment Low investment and operating costs Reliable process stability Smallest excimer system footprint available on the market High quality engraving with accurate contrast adjustment on a variety of spectacle lenses and coatings Smallest required space on the market Low investment and operating costs Easy retrofit of automated handling system at customer’s site on request...

... results correctly and systematically. ProCable compares the received measurement results with the existing test plans and immediately reports any possible exceedances of intervention or tolerance limits to the operator. The operator can repeat the measurement or is required to comment on the exceptional situation. Compatible with cable measuring device: any PC Operating system: Win VISTA, Win 7, Win 8.x, Win 10 RAM - memory: 2 GB Hard disk space: 5 GB...

... lift door by hand, after safety release Advanced — electric Z-axis, adjustment of the focal point with operating button — Opening and closing of the lift door with operating button — Set up: directly on a desk or mounted onto the movable base frame Advantages of integrated optical three-axis technology: — focal point to be freely set and is especially impressive — mark on any shape with...