current sensor Germany

... high-pressure version for monitoring tasks in compressed air systems is available, capable of operating at pressures up to 150 Bar, featuring a ½" screw thread. For outputting measurement values, both analog and digital interfaces are available, with the possibility of custom adjustments for the measured variable (dew point, relative humidity, ambient temperature) in analog output as a 4-20mA current loop or 0-5V voltage output, as well as a combination of several simultaneously outputted measured variables at the digital interface.

... the upper layers of the atmosphere. The DK-ALD2 captures the barometric air pressure using specialized piezoresistive sensor elements. The signal processing electronics convert the current air pressure into analog standard output signals (e.g., 0...5V, 0...10V, 4...20mA with 24VDC supply; others available upon request).

... has a 4-digit LED-display for representing the differential pressure as well as up to 2 freely configurable contacts. Features: — differential pressure 0 ... 6 mbar up to 0 ... 1000 mbar — accuracy: 0.35% / 1% / 2% FSO — piezoresistive silicon sensor — compact and robust aluminium housing — suited for non-aggressive gases and compressed air — current and voltage output signals in 2- and 3-wire systems Optional Features: — display and switching module with up to 2 contacts — customer specific versions...

... H mm):approx. 900 x 1.100 x 1.600 weight:80 kg no. of lamps:6 max. operating pressure:10 bar electrical connection:PURION controll cabinet Model 1: • 3 ~/N/PE 50 Hz 400/230V • L/N/PE 50 Hz 230V total power:6 x 90 W or 6 x 106 W (depends on configuration) current protection:3 x 6A rack:grooved aluminium...

... braking current. The regulated braking system allows for high rewinding speeds while maintaining high winding quality. In the event of a wire break or at the end of the wire, a quick stop is initiated via a wire break circuit (all active processing units are braked). An "EMERGENCY STOP," realized through the rewinding machine, is executed using a permanent magnet brake.

...the economical alternative Replacement for STRATE 1DF2 and 2DF2 pump controllers suitable for connection to all STRATE fill level recording systems: contact-based or contactless the 2DF2 plus also handles dual level measurement: Sensor/pilot tube and sensor/contactor for outstanding operational reliability the current level and operating hours are always shown on the display housing:ABS/Polycarbonate...

...CoriSENS is a rotation rate sensor for measuring angular velocity ω. It detects rotational movements using a MEMS gyroscope. This measuring signal in a range of ± 20° / s is converted by the sensor electronics and transmittes an analog current signal as well as voltage signal in addition. The sensor is certified according to uniform standards for electronic equipment on rail vehicles (DIN EN 50155) and can be operated directly with the usual onboard supply (24 V). Supply voltage:24 V Sensitivity:100 mV/°/s & 0,4 mA/°/s Measuring range [°/s]:± 20...

...LED driver, Primary 180-295 Volt AC, 254-417V DC / Secondary 500-1400 mA, max 60, electronically regulated, IP20, suitable for furniture installation, Certifications: ENEC, SELV, F, M+M, 110, 123.5 x 81.5 x 23mm, Dimming function for up to 10 units with Master/Slave via sensor switch (push dimming) or Dali interface, Meanwell LCM-60-DA Item number: LEDTR60-500-1400MW-LCM...

... tilt angle dependant swing of which is measured, depending on the application, either by a potentiometric, non-contact inductive or an optoelectronic angular encoder. For measurements relevant to safety, the pendulum swing per axis is detected with redundancy i.e. by means of two mechanically and electrically independent pendulum systems. The output signal, representing the tilt angles, is provided either in form of an analog resistance, current or voltage variation or as a digital signal - with interface bus - as well.

...Digital display for direct current or direct voltage programmable Dimensions: Front panel 96x48mm With or without 2 programmable limit contacts, MIN and/or MAX contacts Input: 50..200mV/5…20V/50…200V/0.5…2mA/5…20mA/4…20mA Output: Sensor supply 24Vdc (optional) Auxiliary voltage: 24Vac or 115 or 230Vac or 240Vac or 20…150Vdc/48Vac or 150…250Vdc Display: programmable; 3 1/2 digits, max. display: -1999…1999...

... LAN interface with MODBUS/TCP. This ensures increased operational and process safety with optimal user-friendliness. Continuous measurement occurs approximately twice per minute as long as water flows. The use of indicators is avoided, and instead, an ion-selective sensor is employed. This sensor monitors itself and indicates when replacement is necessary. Typically, this is the only maintenance...

...Calibratable liquid glass thermometers for measuring the current ambient temperature. These thermometers are also used as psychrometer thermometers according to August.

...Are you using an ATMION® wide-range vacuum gauge for pressure measurement and experiencing issues? Or are you looking for a replacement sensor? Contact us! As a long-standing manufacturer of the ATMION® wide-range vacuum gauge, we are your personal contact in case of service needs or if you require a replacement sensor. We also offer a comprehensive and prompt repair service for all other devices we manufacture, whether from current or previous product lines, such as the MVC-3. Just reach out to us!

...• Rogowski coil with amplifier unit • Use with matched current sensor (Rogowski coil L-B22-175) for • universal measurement of alternating currents • standardized output signal 0 ... 1A • measurement ranges 250 ... 4000 A • power supply: 24VDC • compact design in plastic housing • mounting on DIN rail...

...Weather sensors ensure that irrigation is temporarily suspended due to natural precipitation, wind, or frost. Soil moisture sensors stop irrigation when the set moisture level has been reached. The Solar Sync® weather sensor automatically adjusts the irrigation duration based on current weather conditions. With the help of a flow sensor, flow rates can be monitored. The sensors are designed to optimize irrigation in such a way that, on one hand, water can be saved, and on the other hand, to protect green areas and plants from overwatering and the potential damage that may result.

... internal DIP switch allows the control device to switch between Standalone and CAN Sensor Mode. In Standalone Mode, another DIP switch can be used to choose between a push and a toggle function. In the push function, the output relays to be controlled are activated as long as either a transponder or a smartphone with the button pressed is held near the control device. If the transponder or...

...housings, and sensor arrays. Special Features Fast rise time and excellent sensitivity in the 950 nm range Slow increase in gain with reverse voltage Very low dark current Housing: SMD Active area size (mm) / area (mm²): Ø 0.5 / 0.2 Dark current (nA); M = 100: 0.5 Breakdown voltage (V): 260-340 Rise time (ns) M = 100, 905 nm, 50 Ω: 1.6...

...Rail-Mounted Measuring Transmitter The LKM273 is a digitally configurable measuring transmitter for Pt100/Pt1000 with a 4..20mA current output designed for mounting on a 35mm DIN rail. Using 4 large DIL switches, 13 different measurement ranges can be set. Minor adjustments can be made using the zero point controller. The sensor is connected in a 3/2-wire configuration. The sensor is automatically recognized. The device operates in a temperature-linear manner.

...Flow Sensor for Air & Gases for Air & Gases Measurement Range TM: 0...60 °C Operating Temperature: -10...+60 °C Humidity Range: 0...95 % relative humidity, non-condensing Operating Pressure: atmospheric (700...1300 hPa) Voltage: 24 V DC +/- 20% Current Consumption: typical < 35 mA (max. 80 mA) Analog Output: 0...10 V Protection Class: IP 40 Protection Rating: III (SELV) Minimum Immersion Depth: 35 mm Material: PC, ASS; nickel-plated brass Weight (Sensor): 0.050 kg Dimensions: Ø 12 mm; Length 144 mm Measurement Range (WN): 0...10 m/s...

...The alfda ALB300 humidifier is suitable for rooms up to 44 m², with a maximum humidification output of up to 300ml per hour. Thanks to the hygienic nanoEVAPORATION technology, it emits 99% fewer bacteria compared to conventional ultrasonic humidifiers. In automatic mode, the integrated humidity sensor monitors the current air humidity and maintains it at an optimal level of RH 45-65%. Achieving...

... systems saves on investments and new purchases. An internet connection and thus an intervention in the company's security policy is not necessarily required. Track’n’Trace processes data from various Auto-ID and sensor technologies and makes it usable for internal company applications, production control, and quality management. The disclosure of the GUI source code, API, and DB schema guarantees high flexibility for future adjustments.