sensors for pressure measurement Germany

... impacts. The measurement output is digital via an I²C interface, with the address being customer-specific. Thanks to the bus capability of the interface, combining multiple sensors within a system is easily achievable. Measurement range:: 0...80% rH, 80 - 100% rH (short-term); -40..+100°C Accuracy:: +/- 1.8% rH in the range of 10..80% rH; +/- 0.2% rH in the range of 0..10% rH; +/- 0.2° C in the range of 0..60°C Operating pressure:: max. 150 bar...

... control technology for pump control. Magnetic-inductive flow meters are reliable and economic compact units or installation in the pressure line and are available in two basic versions: Sensors for pipe installation with integrated measuring transducer and on-site display as a compact unit Sensors for pipe installation with separate measuring transducer. With this version, the measuring transducer can be located separately on the wall in the service building or as a fitted housing directly in the AWAcontrol control cabinet. ...

... enable precise measurements and thus provide a reliable basis for the control and optimization of industrial processes. From pressure and temperature sensors to flow meters, we offer a variety of solutions that enable accurate recording of process parameters. Versatility for various applications: Our range of industrial metrology includes a wide range of products suitable for various applications, be it chemical, petrochemical, food, power generation or other industries.

...For continuous level and temperature measurement of water and wastewater, BD/SENSORS has developed the LMK 307T. The advantage: Simultaneous measurement of level and temperature with separate, independent signal amplification. Maintenance and wiring efforts are significantly reduced. In addition to the classic signal processing of the level, there is an additional signal circuit independent of...

... JEVAmet® VCU-BM VACOM – MVC-3 (variants B0 and BM) Measurement accuracy: ± 10% of the displayed value in the pressure range of 1E-2 mbar to 1E-8 mbar Reproducibility: ± 5% of the displayed value gas type dependent 2 interchangeable yttrium oxide-coated iridium filaments Outgassing temperature: max. 250°C Sensor in stainless steel tube 1.4301...

...which one can glue on the surface of the flow body. The photo shows typical flat pressure probes. Typical dimensions are 17 mm (diameter of the flat disc) and 0,5 mm as diameter of the pressure borehole. The disc consists of bronze, while the measurement tube is made of high quality steel. In order not to interfere with the flow the discs are chamfered around their periphery. When producing the flat pressure sensors for you we can take your individual design requests into account. Simply contact us for a nonbinding offer.

... options · RoHS compliant User-specific designs · Discs made of stainless steel · Cylindrical measuring bodies with metal membrane · Pressure sensors are supplied according to user specifications, in accordance with the measuring body requirements.

...The digital LDE differential pressure sensors are based on thermal mass flow measurement of gas through a very small flow channel integrated into the sensor chip. This new sensor technology enables highly sensitive measurement of the lowest pressures. Due to the minimal gas flow, the sensors are very insensitive to dust, moisture, and long connection hoses compared to conventional flow-based...

...Fully automatic end-of-line tester for checking the functionality of oil pumps under specific operating conditions Measurement principle: Test specimen is integrated into the oil circuit Application of parameters (pressure, temperature, speed) Collection of measurement data (flow rate, speed, torque…) Properties: 100% testing High testing throughput, short cycle time...

... - Individually equipped with micro annular gear pump, filters, sensors (e.g. flow, pressure, temperature), valves, fluid connections - Chemical resistant materials - Material combinations from stainless steel / hard... Pumps: Micro annular gear pumps of hermetic inert and high performance series for volume flows from 0.003 t Filter: Filters in stainless steel, alloy C22, PTFE or glass * Mass flow...

...Differential pressure 0 … 1.6 mbar to 0 … 1000 mbar Accuracy: 0.5% FSO BFSL Current and voltage output signals in 2- and 3-wire technology Selectable measurement ranges Adjustable damping The IDPS 300 pressure transmitter has been designed for the differential pressure measurement of dry, non-aggressive gases and compressed air, and can be used for a wide range of HVAC applications. The IDPS...

... / contactless forehead thermometers - Thermometers with permanently attached temperature sensors. In accordance with the Medical Devices Operator Regulation, commercially used blood pressure monitors and fever thermometers must regularly undergo independent testing. This is also recommended by most manufacturers. To save effort, devices are often disposed of within their normal usage period and replaced with new ones. A check often represents a more cost-effective and sustainable alternative to replacement.

...Fiber Optic Heads | Pressure and Flow Measurement Devices | Ionizers | Fans • Sensors: Fiber optic, laser, optoelectronic, safety, contrast and color, triangulation, inductive, analog, electrostatic sensors, sensors for semiconductor/microelectronics and flat glass production, • Fiber optic heads • Pressure and flow measurement devices • Ionizers • Fans...

... and testing facilities: - Camera systems including image processing: part recognition, position determination, color and surface inspection, damage image detection - Optical, tactile, and ultrasonic testing of sensors and displacement measurement systems - Pressure and density testing - Level control and level monitoring - Rotational properties and roundness accuracy - Measurement of tooth flank...

... During the test itself, an adjustable recirculation blower keeps the dust suspended. This ensures that your test specimen is evenly and uniformly exposed to solid foreign bodies from all sides within the dust test chamber. When conducting a test according to IP6X, pressure and volumetric flow sensors automatically regulate the vacuum system. You can choose the type of dust according to your...

...Cell wheel feeders are versatile dosing devices used in various sectors such as plastics, rubber, animal feed, chemicals, food, and for bulk materials of all kinds. We supply the following versions: - Feeders in steel welded construction - Made of standard structural steel - Made of stainless steel - Gas-tight, pressure-resistant up to 6 bar - Temperature-resistant up to 600 °C - Optional with speed monitoring, temperature sensors, internal pressure measurement,...

... membranes are released through thinning and etching processes using selective etching techniques. The technology platform is built on a 6" wafer size and is continuously being developed further. Current examples of devices include CMUT and PMUT for applications in non-destructive monitoring/analysis of materials, distance measurement, object detection, level measurement, as well as endoscopic and acoustic and photoacoustic imaging. Other applications of these technologies include pressure sensors and optical filters and shutters.

...Pressure is one of the most commonly measured parameters in technology, which is why there is a particularly high interest in accurate and reliable pressure measurement. Air is used as the pressure medium. Especially in applications where the test specimen must not be wetted or where aggressive or ionizing substances are not allowed, air is the ideal testing medium. The pneumatic test pump from...

...The cost-effective solution as a pressure chamber or autoclave We offer customized solutions. Our autoclaves can be equipped with heating and sensors. Your advantages • Easy to operate • Mobile and robust design • Practically wear-free and easy to clean many options available • Visual condition monitoring through viewing window • Various heating methods (circulation / heat exchanger / infrared...

...Distribution Unit for reduction and control of high pressure liquid flow...

...Flow Sensor for Air & Gases for Air & Gases Measurement Range TM: 0...60 °C Operating Temperature: -10...+60 °C Humidity Range: 0...95 % relative humidity, non-condensing Operating Pressure: atmospheric (700...1300 hPa) Voltage: 24 V DC +/- 20% Current Consumption: typical < 35 mA (max. 80 mA) Analog Output: 0...10 V Protection Class: IP 40 Protection Rating: III (SELV) Minimum Immersion Depth: 35 mm Material: PC, ASS; nickel-plated brass Weight (Sensor): 0.050 kg Dimensions: Ø 12 mm; Length 144 mm Measurement Range (WN): 0...10 m/s...

...pressure measurement technology, flow, mechanical measurements, scales, weights, and more; calibration of medical technology such as: patient simulators, defibrillator testers, infusion pump testers, blood pressure monitor testers, SpO2 simulators. Our products: electronic pressure measuring devices, calibration service, accredited testing laboratories, testing equipment calibration, data loggers, sensors, weights for all types of scales, measurement technology, multifunction calibrators, infrared cameras. In addition to calibration, we also perform adjustments.

... optimally tiered product range but also professional support. We provide light radiation sensors and systems tailored specifically to your applications for measurement, transmission, and data evaluation. Particularly in the field of optical light radiation sensors for outdoor use, we offer a wide range of products. We are happy to meet our customers' requirements with our consulting service. Your special projects will, of course, be treated confidentially from planning to successful realization.

Manufacturer of pressure and temperature measurement technology for customers in machinery and plant engineering, chemical industry, pharmaceutical and food industry. Pressure gauges, pressure transmitters, pressure sensors, temperature probes.

...pressure transducers, and pressure transmitters. They reliably measure pressures from 100 mbar to 1,000 bar with the highest accuracy. For measuring flow rates, various flow sensors and measurement systems are available. The wide range of measurement principles allows for the detection of flow rates between 0.01 and 500 liters per minute. To emphasize sustainability, all products are designed...

Paul Rüster GmbH develops, designs, manufactures, calibrates, and distributes sensors and components for temperature and pressure measurement technology.

...UST Environmental Sensor Technology GmbH, based in Geschwenda/Germany, was founded in 1991 and is now an internationally operating, recognized, and successful medium-sized company in the field of ceramic sensor technology. A key foundation for economic success is the market-oriented development and production of ceramic-based sensor elements for gas and temperature measurement technology, as well...

... laboratories as pleasant and successful as possible. Our bioreactors enable gentle and successful cultivation of cells. medorex fixed-bed bioreactors are particularly designed for the cultivation of primary cells, mass production of monoclonal antibodies, cytokines, or tissue engineering. In addition, we manufacture peripheral components such as sensors, probes, measurement and control technology, and sample takers for fully automated bioreactors and systems that are characterized by precision, ease of use, and high performance.

Development, manufacturing, and distribution of electrical temperature measurement technology; resistance thermometers, sheath resistance thermometers, thermocouples, sheath thermocouples; evaluation devices, temperature sensors...

Manufacturing of differential pressure sensors and electronic pressure measuring devices for use in ventilation and air conditioning technology.