production of metal components Germany

...Both the construction of industrial plants and modern architecture would be unimaginable today without the use of metal components. Using powerful TRUMPF punching, nibbling, and laser cutting machines, SMB manufactures a wide variety of products that are applied in these areas, including both individual and series parts. The depth of production ranges from raw parts to ready-to-assemble assemblies. Whether it's simple circuit board cutting or complex assemblies, quality and reliability are our top priorities. Only when our partners are satisfied are we satisfied too!

... all kinds, processing the finest sheets (0.020 – 1.000 mm) has been part of our daily business for over ten years. Our customers come from various sectors, including the automotive industry, but increasingly from fixture and special machine construction as well. By using spacers to compensate for tolerances, the manufacturing effort for individual components can be reduced, effectively lowering production costs. As specialists in laser fine machining, we produce particularly fine cut parts with almost no burrs and a high level of flatness.

...Our new service – Metal cutting using fine beam plasma technology (cutting table 12000 x 3500). • Stainless steel thicknesses of 2 – 40 mm can be cut • Steel thicknesses of 1 – 60 mm can be cut Your advantages: 1. Minimal waste through process- and material-oriented production: Generated remnants are managed and can be stored temporarily. 2. Consistent reproducibility of the produced...

...With laser generation, components are built up layer by layer from powdered metallic materials used in serial production such as 1.2709 steel or 1.4543 steel. Thanks to state-of-the-art technology, this enables us to transfer your computer-generated 3D/CAD models reliably over to their physical form. Here, thin coats of the powder materials are applied to a base object before being melted using a...

...locksmithing, light advertising, roofing, plumbing, sheet metal work, sanitation, and the computer, electronics, and lighting industries. • Affordable stationary solution • Processing of bulky or hollow components • Large horizontal and vertical reach • High-quality joining results due to adjustable stroke limitation • Reproducible results • Suitable for continuous operation • Low noise...

... CCMs. By replacing platinum with a cost-effective metal oxide catalyst, material costs can be significantly reduced. The advantages of this new CCM are: • reduced costs: expensive platinum is not required • extended durability: the metal oxide catalyst is far less prone to poisoning compared to platinum • efficiency: high current densities and hydrogen production rates are achievable...

...Heat recovery, which refers to the reuse of waste heat generated during energy production, helps to reduce energy consumption and increase efficiency. Typically, metal pipes are used for heat recovery. However, many industrial fuels contain acid-forming substances such as sulfur. During combustion, an aggressive, vaporous acid-water mixture is produced, resulting in a reactive condensate. This...

...Stamped and Bent Parts According to Drawing Our daily bread is the production of custom stamped and bent parts according to your specifications. We primarily manufacture components from sheet steel, galvanized sheet steel, aluminum, stainless steel, copper, and tinplate. Special materials available upon request. Send us your inquiries: via email - preferably as a CAD file in DWG, DXF, or STP...

... construction with a design department, we can ensure that the paths are laid out in such a way during planning and development that an optimal result is achieved through error-free production. Additional manufacturing techniques • Finishing/marking processes such as: Pad printing or laser marking • Assembly and commissioning of components • Overmolding of metal parts with plastics Materials used: All common thermoplastics such as: ABS, PA, PA6.0, PA6.6, PC, PE, PMMA, POM, PP, PPN, PS, etc. The materials can be colored using masterbatch color pigments.

...In sheet metal processing, we manufacture precise components and assemblies with a material thickness of up to 6 mm. Thanks to the flexibility of our employees and production facilities, we can continuously meet new requirements. Our customers in sheet metal processing come from various sectors, including mechanical engineering, conveyor system construction, drive technology, rail and vehicle...

... others, is based on the given process parameters. MoDoS ® expands the system boundary from pump to pumping system. Actuators are supplemented by measurement and control technology, and offered as a complete solution for process-reliable pumping in the low flow range. Advantages - Ready-to-use unit - Fully equipped and assembled system in a rigid framework - Modular system of components...

... allows for the production of cooling channels and other holes with the smallest tolerances and the highest precision. This is applied, among other things, in electrode arms or connection pieces. Another advantage is the processing of hardened steel and carbide components with our CNC wire EDM machines.

...Metal housings can be found in almost all companies that have a machinery park. They serve to protect the sensitive electronics of the machines, as they are shielded from environmental influences by the encasement in a metal housing. We use various raw materials for the production of the housings, such as steel, stainless steel, aluminum, and other non-ferrous metals. These are excellently...

... handling, in the aircraft industry, in steel production and in steel handling. Process cranes for the paper industry:Cranes to serve paper machines/roller cutters, Automated paper roll store, WMS Process cranes for metal handling:Transport of long materials, Process cranes in coil stores, Automated cranes Process cranes for mechanical engineering:Heavy mechanical engineering, Power stations...

...In medical technology, etching is the reliable partner for the production of metal parts with complex details. From dental discs with intricate finishing, to injection needles, and even medical saw blades, we supply our customers with a wide range of high-precision medical metal components.

...A specialty of PSFU is the production of custom Hirth and flat-tooth couplings, which are used in high-precision machine tools as well as extremely durable gas turbines. The Hirth coupling is a form-fitting, self-centering, and easily detachable connection element. Hirth couplings connect shafts, discs, wheels, and cranks made of metal – with remarkable precision at maximum torque capacity.

... and effective material use already from quantity 1. Wire-based 3D metal printing offers the following potentials compared to previous manufacturing methods: > Near-net-shape parts with the saving of subtractive work when milling from the solid > Near-demand production of small series and prototypes > Energy-saving component production compared to casting or forming Whether the application is also suitable for your tasks or whether the potentials can also be used for your products - we would be happy to discuss both with you. Send us an e-mail!

... efficiently and to a high standard of quality. From the simple partial assembly of components to highly complex complete systems - as a single piece, small or medium series, or as a long-term partner for larger projects. Are you looking for support with drilling, milling or turning? As a mechanical engineering company, we can offer you the right machine - In the service sector, we limit ourselves to contract assembly and do not compete with our customers - We would be happy to put you in touch with our broad (customer) network in a wide range of manufacturing sectors.

...Our sheet metal systems provide customized solutions from the initial design idea to the finished product. We translate our customers' wishes into production-ready and optimized designs and coordinate the entire manufacturing process up to the final assembly on-site. Our sheet metal systems include individual components, basic frame systems, machine enclosures, and more, all tailored to the specific technological capabilities of our manufacturing partners. With our extensive experience, we guarantee the highest quality and efficiency in production.

...Machinery production and metal processing Services: Production of large size components CNC machining Designing, production and installation of non standard technological devices Log feeding and sorting line design, production and installation Wooden by-products and biomass feeding conveyor system design and production Additional information: www.iekarturupnica.lv...

...Clients from leading industrial sectors engage us for complex metal construction projects. We specialize in custom components and series production from aluminum, stainless steel, and steel. As a full-service provider, umetec GmbH designs and manufactures your solution in metal, steel, and aluminum. We understand the quality demands of modern steel construction. Our intelligent concepts ensure that your plans take on tangible forms. Contact us for a quote. We value personal communication and flexible solutions.

...The DMP machine solutions are designed for flexible series production of complex metal components using micro laser sintering. The DMP machine series is the perfect solution to achieve superior detail resolution, highest surface quality, unrivalled accuracy, and very high part density. It offers high flexibility, low operating costs and user friendliness. The system includes a zero point...

...For your product development, we are here to support you with our full range of services, consultations, and training. We assist you in areas such as innovative ideas, material selection (including metal substitutes), technologies, and processes all the way to the implementation of a reliable production process. Our offerings: - Design - Early concept development - Component optimization...

... diaphragms in analytics. The following materials are used: - Aluminum oxide RAPAL (Al2O3 99.7 %) - Aluminum oxide RAPOX (Al2O3 95 %) - Zirconium oxide and ZTA - Silicon nitride - Porous ceramic Production of prototypes and small series without tooling costs! In-house tool manufacturing Series production from customer-specific tools Joining techniques for ceramics with other materials (plastic, metal, etc.) Assembly of components...

... TS/TFS NEO features a new milling unit and a modified Caxis (±400°) which, thanks to its enormous flexibility, can be used for efficient production of highly precise machine parts. The large number of automatically changeable milling heads increases the machine's flexibility within its scope of application. The TFS also allows automatic tool or spindle changing and tool or workpiece measurement...

...The production of sheet metal components primarily begins with cutting on the laser. Here, the flat patterns of the geometries are cut out from the sheet metal using the most suitable technology. For the thin sheet metal area, the solid-state laser is used. As the sheet thickness increases, the CO2 laser becomes the best tool. Subsequently, the cut pieces are freed from burrs and scale and can...

...Exceptional projects require exceptional components. Specifications often go beyond standard norms. That’s why we specialize in threaded parts with a high degree of customization. Thanks to our in-house tool production, we can realize spindle dimensions that exceed any norm in terms of thread depth, shape, pitch, or flank angle. Special thread spindles with custom dimensions We manufacture...

... provides real-time process data and information on all system components on standard devices, regardless of location. Users benefit from extensive information and can systematically plan and execute a variety of system revisions. This generation of plasma cutting systems is the result of intensive research and development by Kjellberg and marks a milestone in Kjellberg's 60-year plasma history. With the new digital plasma system series Q, pioneering standards in quality and connectivity are being set. Application: Plasma cutting, metal cutting Additional features: Automated CNC, high speed...

...Our service team is available worldwide for you. Eilhauer carries out repairs and overhaul services as well as on-site maintenance. This service can also be performed at our facility, including all disassembly and assembly work. Any new manufacturing or refurbishment of wear parts will be reliably and safely executed in our production. Our service team takes care of all assembly, sheet metal, and piping work, as well as all installation and maintenance tasks for hydraulic and pneumatic components. Rely on our service expertise.

...A CNC-controlled 1600-kN press brake with a working length of 3,400 mm is available for bending products. Material thicknesses of up to 10 mm can be processed. For subsequent operations, MAG and TIG welding machines, as well as additional equipment and fixtures, are available. This allows for the production of ready-to-install components and complete sheet metal welding assemblies.