Results for

Automation of lines

9 Companies

99 Products

Product recommendations

Germany

Spain

See more products

DRAHT-BINDER OHG

Germany

Thanks to more than 60 years of concentrated further development of our core business, our company now specialises in producing grids and meshes of all kinds for our customers. We provide products both for retail and directly for end customers. Our company was founded in 1945 as a metalworking company with subdivisions for fencing and door construction. Even in its early years, the company incorporated a small mechanical engineering department, in order to design wire processing machines for in-house use. In the 1970s, wire weaving developed into an equally important source of income for the company. In 1978, the first fully automatic production facility for corrugated grids and stamping grids was built, the company relocated to Erkrath and new markets were opened up thanks to the company concentrating on manufacturing wire meshes. In 1995, the product range was expanded to include spot-welded grids and profile edgings. Manufacturing is now carried out on four fully automated production lines.

Website
FOTOVERBUNDGLAS MARL GMBH

Germany

LamiPress – the flexible autoclave system. Not autoclave-free but calling on a globally-patented overpressure procedure, LamiPress stands for high-quality LSG products made from PVB and SentryGlas, certified quality and absolute process safety thanks to contact heat consuming 50% less energy. With our cost-efficient, easy-to-operate and maintenance-free system, you take your LSG business, and thus a large proportion of the value added and customer satisfaction into your own hands. Or through the symbiosis with an existing autoclave, you create up to 30% additional capacity on the basic glass line. As a newcomer, take advantage of maximum production opportunities. Every desired laminated glass product, ranging from LSG made from ESG to exceptional multi-layer laminates, can be sampled in advance in our in-house factory. And the scalable modular principle can also be subsequently adapted to increases in throughput. Don't waste manpower on producing error-prone vacuum bags and don't get blocked on the pre-lamination line designed for mass production. LamiPress can manufacture profitable special and fixed-size laminates in a particularly eco-friendly manner without costly consumables in a fraction of the cycle time otherwise required. From laboratory scale to the fully-automated jumbo line, we configure your tailor-made LamiPress for you. Secure the next-generation lamination technology now!
RALF LANG MASCHINENBAU GMBH

Germany

As a leading general contractor for automation and robotics, we offer innovative solutions, flexible robot concepts and comprehensive process knowledge. Whether this is for a series or a specialised machine. We specialise in the automotive industry, medical technology, food, electronic equipment and electrical appliances, and our core competences are in measuring, assembling, sorting, combining and packaging. Leading automotive manufacturers, pharmaceutical companies and their suppliers rely on our innovative and high-quality solutions, with more than 300 pieces of plant machinery and measuring machinery supplied all over the world. Our strengths lie in our services and our level of quality, above all in our process competences. Example: Flexible feeding using BinPicking. With this approach, we can cope with high parts variation and the smallest batch sizes. By dispensing with manual part feeding, we increase efficiency, safety and correct handling. Combining (joining, metering, adhesive bonding with various application techniques) of components. Our aim is to design the process to achieve series production of a consistent quality, adapted to your performance requirements. Testing and measurement, visual or tactile, of components. Both using our own testing solutions and using external testing product manufacturers. Whether it's an individual automated machine, rotary transfer system, linear transfer system with just a few cells or a large-scale plant – you're in good hands with us. Come and be impressed by our tailored solutions and our high quality standard.

Website See all products
SCHMALE MASCHINENBAU GMBH

Germany

We are one of the leading manufacturers of wire bending machines and tube bending machines.. In our modularly designed systems, we install a wide variety of forming technology units to create customer-specific automation solutions. At the start of a new project, we analyse our customer's individual manufacturing problem and use it to put together a tailored package of technologies. These form the starting point for planning our production facilities for wire, tube and strip. Each of the production technologies can be combined with others according to the modular principle and is not tied to an existing machine concept. This is clearly what sets us apart from the competition. Our development team is constantly looking for optimisation potential e.g. in raw material or energy savings and takes into account possible later expansion stages of the systems at an early stage. This enables us to provide our customers with highly productive and future-proof solutions for production.

All the products for "automation of lines"

Clamping ring machine

Website See all products
OHRMANN GMBH

Germany

OHRMANN MONTAGETECHNIK combines seal assembly and automation. OHRMANN MONTAGETECHNIK specialises in equipment, stations and machines, as well as fully automated solutions, for feeding and installing seals. Since the company was founded in 1986, OHRMANN MONTAGETECHNIK has been helping customers to feed and install seals with speed, reliability, consistency and automation. The solutions are employed not only for O-rings, but also for lip seals and other seal geometries, including even complex moulded seals. Our portfolio of solutions incorporates: • Standardised assembly equipment, semi-automated and fully automated systems for internal assembly, external assembly or front-end assembly of seals • Integration modules and stations: A modular system for feeding and installing seals for integration in fully automated systems • Complete automation solutions, available as rotary table systems, line transfer systems or robot cells

Website

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

MERECS ENGINEERING GMBH

Germany

Merecs Engineering GmbH specialises in the areas of test automation, software development and test equipment construction. Our range of services include defining requirements, design and implementation, training and commissioning domestically and abroad, plus comprehensive support and maintenance of test systems. Examples include: - End-of-line test benches, durability test benches, development test benches, climate and temperature test benches, leakage test benches (gas/hydrogen), test benches for tilt sensors/multi-axis movement simulation, test benches for power electronics and E-charging points. Working with our customers, we can connect these test systems to their IT infrastructure (databases/ERP systems). Using Python and Microsoft PowerBI, we produce automated analyses of test and production data on request. For this purpose, we create well-structured dashboards (available online on the company network at any time) showing important key figures such as First Pass Yield (FPY), process capability, statistics, etc. As a National Instruments Alliance Partner, we use NI TestStand as a test management tool and NI LabVIEW for software development. Our certified and experienced software architects and developers have an extensive library of software modules that are used in the field of test automation and beyond. In addition, we use C/C++ in embedded systems where microcontrollers are used

Website See all products
IAV DREHTEILE GMBH

Germany

We specialise in machining stainless-steel turned parts. Special materials like Hastelloy, Inconel, Duplex, etc. are no problem for our production line. Our production facilities enable us to forge and upset stainless steel. This brings the advantage of working with less material and keeping the costs for material usage lower. Our greatest core competence is thread rolling, an area in which we have more than 30 years of experience. Our production is highly automated and designed for series production, but individual parts or small series can be included in the production plan at any time. We can produce turned parts from a length of approx. 80 mm up to 6000 mm. In terms of diameter, our range starts at 10 mm and we can process a maximum of 600 mm. If your enquiries are slightly below or above this level, please do not hesitate to contact us anyway.

See all products
EMG AUTOMATION GMBH

Germany

EMG Automation business division produces strip guiding - as well as quality assurance systems for the metal industry, especially for cold rolling mills and surface coating lines. We offer our strip guiding systems as safe, low maintenance and technically mature components but also as holistic solutions providing optimum support to our customers’ technological production processes. EMG Automation’s innovative quality assurance systems enable customers to continuously optimise their production processes, thus enhancing the quality of their products to comply with evermore exacting demands by their customers with regard to their final products.
SCHNUTZ GMBH

Germany

The Next Level of Coil Processing - We are the b+s group The Burghardt + Schmidt GmbH founded the b+s group through the acquisition of traditional, well-known and firmly established companies on the world market. Through the expertises of the subsidiaries Schnutz GmbH and Delta Technik GmbH, Burghardt + Schmidt´s entire product portfolio is expanded by leveling machines, strip feeding systems and automation technology. We offer a wide range of leveling machines with many different degrees of automatisation, within different spectrums of thickness and width to our customers: Levelers for Strip Lines Levelers for Perforated Sheets Levelers for High-Tensile Sheets Levelers for Parts Levelers for Press Lines Hot Strip Levelers Pull-Trough Levelers Straightener Accessories ost levelers are integrated into strip feeding lines systems. The performance of the leveler contributes greatly to the quality of the final product. Of course, all other system components must be coordinated. Already in the planning phase, we provide our decades of expertise in the field of forming technology available to our customers, so that the overall system is optimally adapted to the respective needs. We offer customized solutions for your problems. Strip Feeding Lines Cut-to-Length Lines Driver Unit for Strip Feeding Lines

Find quotes for

Filters

Results for

Automation of lines

Number of results

9 Companies