Results for

Il parts

97 Companies

1,153 Products

Product recommendations

Bulgaria

Portugal

Netherlands

Portugal

See more products

KOLB KS FASTENERS GMBH

Germany

KS Fasteners GmbH was founded as a wholesaler for special fasteners and related parts by Mr Kevin Sievers in Düsseldorf-Stockum, Germany in 2011. As we have very close partnerships with leading manufacturers of special fasteners and so direct access to their production sites, we provide the advantages of a wholesaler combined with the advantages of a manufacturer. We provide fasteners according to standards such as DIN, ISO, ANSI, ASME, etc. in special materials and fasteners and machined and turned parts each according to drawing or specification in any material. Our fasteners include: screws, nuts, washers, stud bolts, anti-fatigue bolts, threaded rods, pins, fitting keys, bushes, sleeves, etc. Our special material range includes: 1.7218, 1.7709, 1.7225, 1.4923, 1.4980, 1.4529, B7/L7, B16, B8, B8M, 660B, Duplex, Super Duplex, Hastelloy, Monel, Inconel, Nimonic, Titanium, Aluminium, Tantalum, etc. Our complete material list is available as download on our website and our Europages profile. We are specialized in an extended service with short response times, if required shortest delivery-times starting from the same day also for manufacture parts and tecnical support. Our intention is to always find and provide solutions for your requirements with you. Our identity is also our demand and our motivation and is: Quality, Competence, Service, Flexibility and Reliability. At KS Fasteners the focus is on our customers.

All the products for "il parts"

Parts

Website See all products
SCHULZ STANZTECHNIK GMBH

Germany

Schulz-Stanztechnik GmbH, a company with over 50 years of history, has been providing products and services to numerous customers both domestically and abroad at its site in Halver, western Germany since 1991. We manufacture and assemble a number of products in various designs over a production area of 2500 m². The wide variety of products that we offer on the following pages can be used to accomplish practically every conceivable task involved in the transportation of goods. The main products consist of axial deep groove ball bearings, detailed parts and components for systems used in warehousing, conveying and transport technology, stamped and stamped bent parts, together with accessories for cable installation.

All the products for "il parts"

Turning parts

Stamped parts

Website See all products
ROHRBEARBEITUNG KETTERER

Germany

Rohrbearbeitung Ketterer – abrasive cutting test centre/Abrasive cutting for tool and machine building – Wet or dry cutting. We are certified to ISO 9001. Series production runs and prototype development for the automotive, aero-engineering and other industries. We are the specialists in processing hard-to-cut materials. Stainless steel, nickel, titanium, molybdenum, tungsten, vanadium, tantalum, niobium, gold, carbide and also ceramic and composite materials such as CFK or GFR. Pipes with wall thicknesses from 0.1 mm. Outer diameters from 1.0 mm to 200 mm. Cutting lengths from 3.0 mm. Calibration, expanding, notches, hole punching. Series production: Cutting tube-formed parts on 3D-formed clamping devices. Manufacturing pipe elbows from tube coils. Carbide blanks. Up to 40 mm outer diameter. Tool manufacturing: Quick-change fixtures with 3D-milled forms according to your dataset. Pneumatic clamping and cooling water supply on the standard base block. Machine building: Individual construction according to customer requirements. Manual machine – manual cutting with pneumatic clamping – for quick-change devices. Half-automated machines/manual cutting/clamping and pneumatic/electric feed. Fully automated (also with robotic handling system) for large-scale production.

Website
OK-PARTS GMBH

Germany

The company OK-PARTS GMBH, is a Wholesaler, which operates in the Doors, house industry. It is based in Düren, Germany.
STP-PARTS GMBH

Germany

The company STP-PARTS GMBH, is a Wholesaler, which operates in the Spare parts for cars industry. It is based in Hilden, Germany.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

THAL-PARTS

Germany

The company THAL-PARTS, is a Wholesaler, which operates in the Cables - accessories industry. It also operates in the Fastening devices, Coupling screws, Nuts and bolts, Plumbing, industrial, Fastening devices, Coupling screws, Nuts and bolts, and Plumbing, industrial industries. It is based in Raesfeld, Germany.
AO-PARTS GMBH

Germany

The company AO-PARTS GMBH, is a Wholesaler, which operates in the Cars industry. It also operates in the Automobiles, Lorries, vans and commercial vehicles, Cars, used, Vehicles - mechanical components and parts, Automobiles, Lorries, vans and commercial vehicles, Cars, used, and Vehicles - mechanical components and parts industries. It is based in Bielefeld, Germany.
PARTS ATTACK GMBH

Germany

The company PARTS ATTACK GMBH, is a Wholesaler, which operates in the Motorcycle parts and accessories industry. It also operates in the Petroleum fuels and additives, Fuels, diesel, Fuels, liquid, Lubricants, industrial, Petroleum fuels and additives, Fuels, diesel, Fuels, liquid, and Lubricants, industrial industries. It is based in Bochum, Germany.
WEST-PARTS GMBH

Germany

The company WEST-PARTS GMBH, is a Manufacturer/ Producer, which operates in the Steels and metals - machining industry. It also operates in the Steels and metals - surface treatment and coating, Industrial building construction, Machine tools - metal shaping, Machine tools - metal machining, Steels and metals - surface treatment and coating, Industrial building construction, Machine tools - metal shaping, and Machine tools - metal machining industries. It is based in Nümbrecht, Germany.
SMP PARTS GMBH

Germany

The company SMP PARTS GMBH, is a Manufacturer/ Producer, which operates in the Building materials, manufacture - machinery and equipment industry. It also operates in the Mining and quarrying - machinery and equipment, Construction site installations and equipment, Road, beach and ski-slope maintenance - machinery and equipment, Drilling and test boring - equipment, Mining and quarrying - machinery and equipment, Construction site installations and equipment, Road, beach and ski-slope maintenance - machinery and equipment, and Drilling and test boring - equipment industries. It is based in Kempen, Germany.

RAS PARTS GMBH

Germany

The company RAS PARTS GMBH, which operates in the Industrial equipment hire industry. It is based in Mönchengladbach, Germany.
SHENZHEN PROMOSTAR HARDWARE CO.,LTD

Germany

ShenZhen PromoStar Hardware Co., Ltd is a company who specialize in Metal CNC machining parts, CNC turning parts, CNC milling parts, stamping parts, sheet metal parts, welding products for all kinds of industry. The materials we used to worked were stainless steel, aluminium, titanium, brass, copper, carbon steel, POM, PEEK and so on. The headquater of Promostar located at ShenZhen, China with a 2000² meter workplant.Since 2016, Promostar has an office in Meerbusch, Germany. Since 2021 lunched a 3000² meter workplant in Jiangxi China. We can meet all industry demands, such as : Austronautic, Optik, Sensor, Electronic, Automotive, LED lighting, furniture, machinery & equipments, medicial equipments, plastic & moulds lines and so on. We can reach the tolerance within +/-0.002mm. The material we are using can be reached the standard cetifications from ROHS, REACH. Promostar invested a lot on the machines and worker technologies and we have a strong human resources department. All our team have more than 8 years relationship. We work on team. PromoStar is getting a good credit around the world. Please do not hesitate to contact us for more information !

All the products for "il parts"

CNC milling parts

Stainless steel printer accessories.

custom stainless steel shaft.

CNC Automatic Aluminum Rod.

Stainless steel support.

Website See all products

Product recommendations

Germany

Modeling of Parts for The Home Furniture Industry / Decorative Furniture

Portugal

Germany

Poland

See more products

GSW SCHWABE AG

Germany

GSW – Sheet metal fans since 1963. "Sheet metal is worth more than rubies to our customers. So we offer them tailored and holistic solutions for sheet metal work. So that production runs optimally – and indeed continuously." Benjamin Schwabe, CEO of GSW. Anyone who has drunk a cold can of coke at 38 degrees in the shade knows that sheet metal is more precious than rubies. We've seen this for almost 60 years. Sheet metal is versatile in use, sheet metal is simultaneously robust and flexible, sheet metal is art – and indeed something that we master. From reels to straighteners, from coil feeding lines to complete slitting, cut-to-length and winding lines: Our systems and individual machines are proper machinery for sheet metal work, which specialise in sustainably optimising your production. We encourage you to start working with us.

All the products for "il parts"

Flat air nozzle

Parts-transporter classic-series

Transfer & removal of parts and scrap

Website See all products
N&H TECHNOLOGY GMBH

Germany

As a reliable systems supplier of customised products, we can help to develop your ideas from their initial phase through to series production. We particularly focus on the implementation of customised operating units. To this end, our services include the manufacturing of electromechanical assemblies and the procurement of all other components required. Furthermore, we will of course support you in the manufacturing of individual components – true to our guiding principle of being able to offer everything as a sole supplier. As a typical example, we can provide input devices that, along with keyboard elements, include a display, housing, analysis electronics and complete connection systems with cable assembly. We rely on cost-efficient manufacturing at selected production sites in Asia. All these production facilities are certified in accordance with ISO9001, ISO14001, TS16949 and ISO13845. The European quality standards of our products are guaranteed by a comprehensive QA system at these plants and in-house.

All the products for "il parts"

Plastic Parts, Moulded Parts

Rubber Parts, Moulded Parts

Website See all products
WILH. KÄMPER GMBH U. CO KG

Germany

Wilh. Kämper is a family company specialising in wire forming technology, and has been manufacturing its products at its site in Lüdenscheid, Germany, since 1888. Wilh. Kämper is your technical problem solver. We offer technical solutions in the wire sector from development and prototype production to small batch and series production. Our technology includes: – Three-plane bending – Embossing – Chamfering – Knurling – Thread rolling – Reducing – Thread cutting – Welding – Butting – Punching – Flattening – Upsetting We process all formable materials, including steel wire, spring wire, stainless steel wire, non-ferrous metal wire, in diameters from 1.5 mm to 10 mm, and can produce any surface to order

All the products for "il parts"

Joined / Attached Parts

Modules / Assembly Parts

Bent Wire Parts

Website See all products
BADE UND RINSCHEID METALLWARENFABRIK GMBH

Germany

We process belt and sheet material from 0.2 to 6 mm sheet thickness. We have invested in optimised machine units especially for processing aluminium strips, but not only for this purpose. Automatic punching presses, hydraulic presses and eccentric presses with pressing forces up to 3150 kN process belts/coils up to 600 mm wide. Tight dimensional tolerances, high flatness requirements and other technically demanding quality features are produced by us and partly controlled "in line". With our cleaning systems, which use organic, CHC-free cleaning agents in an environmentally friendly manner, we are also able to meet special cleanliness requirements – based on current standards for residual dirt identification. Through responsible management, we ensure that high quality standards – based on customer requirements – are achieved. Flat structures ensure careful, target-oriented and fast implementation of our customer orders.

Website
ANDREAS BERG STAHL- UND MASCHINENBAU E.K.

Germany

Whether systems for cryogenic deburring and decoating, high-pressure washing, blasting media recovery & preparation or steel construction, welding technology, mechanical processing, sheet metal working and 3D printing – the owner-managed family business Berg Stahl- und Maschinenbau e.K. embodies first-class quality in development and production. With more than 40 years of experience we can fall back on a wide range of expertise: ■ machines for cryogenic deflashing and cryogenic decoating, special high pressure washing, blasting media recovery, coating, annealing furnace >elastomer and plastic industry ■ 3D-printing service silicone & plastics, microscopic analysis service ■ offshore constructions ■ steel constructions, soundproof cabins, cladding and coverings, machine frames, assemblies and much more ■ components for offshore technology ■ welding processes (MIG, MAG, TIG, resistance spot welding, stud welding, electric welding, welding robot systems), CNC milling machines 3/4/5-axis up to 7 m milling length, CNC lathes up to 3 m, CNC flame cutting machines, plasma and oxyfuel, CNC press brakes, hole punching machines, round roller and much more ■ surface finishing (painting, hot-dip galvanising, chromating, sand and glass bead blasting, pickling and burnishing) and much more Take profit from our broad business range! We supply worldwide.

All the products for "il parts"

Sheet metal processing

Stampling device for welding work

Website See all products
GTC GMBH

Germany

GTC GmbH has been active in selling genuine motor vehicle spare parts, equipment parts, brakes, chassis components, wear parts, tyres, lubricants and technical liquids for passenger vehicles and trucks for many years. All the products we offer are available for delivery every day and come directly from the central warehouses of automotive and spare part manufacturers. We supply wholesale and retail customers around the world. Our business partners are the largest suppliers of car parts, wheels, tyres, lubricants and accessories in Europe. These parts include the engine, filters, oil water cooler, exhaust gas system, catalytic converters, silencer, clutch, gearbox, Tiptronic PDK transmission, front and rear axles, suspension arm, wheel carrier, shock absorber, drive shaft, steering gear, steering wheel, airbag, wheels, wheel rims, summer and winter tyres, brake discs and pads, body parts, mudguard and side panel, door sills, doors, glazing, front bumper.

All the products for "il parts"

Spare parts for fuel and exhaust systems

Engine parts

Parts of the exterior and interior

Website See all products
ROBERT WINKELSTRÄTER GMBH & CO. KG

Germany

"Robert Winkelsträter GmbH & Co. KG", with its headquarters in Ennepetal (approx. 20 km south of Dortmund), was founded in 1952 as a manufacturer of hinges and fittings made of steel and stainless steel. Here, 20 employees manufacture, commission and distribute products according to your customer specifications: Laser cut parts for sample construction, prototype construction and small series production, stampings and pressed parts in series production, bent parts, for example edging, embossing and rolling. Our core skills lie in the production of special hinges and fittings according to samples or drawings. Through many years of experience and low tooling costs, we can offer you excellent conditions (price and delivery time). In addition to the production of customer-specific parts, we also offer standard items, e.g. DIN hinges or angles. You can view or download the complete catalogue as a PDF on our website. Rest assured that we can offer you careful and reliable processing of your inquiries and orders today.

Website
JA-DE GMBH & CO. KG

Germany

Since we were founded 50 years ago, our staff of about 20 employees have produced furniture parts from solid wood, plywood, wood materials and veneer for our customers in the furniture and shop fittings industry as well as for developers and.of exclusive designs and sophisticated interior fittings. Our customers in Germany and Europe process our semi-finished goods or fronts to create harmoniously assembled cupboards, tables, beds, chairs and individual products. We are always willing to help develop new, sustainable FSC-certified products. With the help of cutting-edge software, we take your CAD drawing and create the program on our 5-axis CNC machines. The customer determines the design, wood quality and surface. We take care of the packaging and shipping. Give free rein to your ideas and send us the drawing of your articles. We handle the implementation. Discretion, quality, reliability and punctuality are our key priorities.

All the products for "il parts"

Veneered Furniture Parts

Production Of Chair, Sofa And Table Parts

Website See all products

LESJÖFORS INDUSTRIAL SPRINGS & PRESSINGS GMBH

Germany

Die Lesjöfors Group is one of the largest manufacturers of technical springs in the world. Our range of products in spring technology includes wire and leaf springs, punched and bent parts, and gas springs. Our experience in spring manufacturing dates back to 1852. Today, over 1800 motivated employees ensure that everything from technical design and spring calculation through to dispatch runs smoothly and professionally. Thanks to our many years of experience in springs, stamping technology and bending technology, we provide our customers with customised solutions which can be implemented in a timely manner due to our flexible production capacity. We are active on the international stage with regard to continuing globalisation. Currently, we have production and sales sites in Sweden, Finland, Norway, Denmark, Germany, the Netherlands, Great Britain, Slovakia, Latvia, Russia, China, Thailand, Singapore, Mexico and the USA .

All the products for "il parts"

Bending Parts

Deep drawn parts

Website See all products
JÄGER-PLASTIK GMBH & CO. KG

Germany

Jäger-Plastik GmbH & Co. KG is an established manufacturer of handles for the packaging industry. For more than 40 years, we have been producing high-quality carrying, bow-shaped and hooked handles, as well as custom handles according to customer requirements. Our main business concentrates on the manufacture of handles in various shapes and sizes, although we also offer the opportunity to develop new handle designs together with our customers. Our specialisation in the processing of recycled materials, which enables us to guarantee sustainable production, is particularly noteworthy. Bottle cap materials in grey and blue, which are also made from recycled materials, are new to the range. Thanks to our modern injection moulding machines, we can guarantee fast delivery times and flexibly fulfil customer requirements. Another advantage is that our products are certified in line with the 'Blue Angel', which offers our customers additional sustainability benefits.

All the products for "il parts"

DTS / Trapez – twin handles – trapeze

POG / Oval – twin handles – oval

DTI / ISO – twin handles – oval

Website See all products
OTTO EICHHOFF GMBH & CO. KG

Germany

A company with over 100 years of experience. With our experience in the production and wholesale of fastening elements, we can help you a lot more than many other companies. Please feel free to call us and tell us what you intend to do. We supply a full range of screws and connecting elements and all custom-made products from a single source, for example: •Screws from 30, 000 pcs. as cold extruded parts, we produce smaller lot sizes e.g. on our turning machines. •Prototyping, drawing parts and sampling according to the German Association of the Automotive Industry (VDA). •Screws manufactured as turned parts for direct screwing into plastics and die-cast products – for every thread form. •Machining of delivered screws. First of all, we see the human being in our customers. We want to celebrate joint success through good cooperation. Customer structure: Automotive suppliers (T1–T3), electronics and electrical engineering, machinery and equipment, household appliances, commercial vehicle industry, construction industry, medical technology and defence technology.

Website See all products
KRÖGEL MASCHINENBAU GMBH & CO. KG

Germany

Not only do we construct special machinery for textiles, films and coating materials, we also design them precisely tailored to your specific requirements. Wherever web-shaped materials are processed, coated, assembled or wound, our experts are at your disposal with their innovative expertise. We develop and manufacture individual components just as functionally and precisely as entire production lines. We turn your ideas into reality and support you from the first product idea, as we rely on partnership and excellent service. Our experienced experts do not develop components for mass production, but rather exactly the technology you need. Rely on six decades of experience in special machine construction. After completion of the product, our service personnel take care of the assembly and commissioning of the machinery. If necessary, we can take charge of the maintenance, repair and overhaul of individual machine components.

Website
GMC GESELLSCHAFT FÜR MARINE- UND INDUSTRIEAUSSTATTUNG MBH

Germany

As a marine and industrial supply company, we deliver compact, large and medium-sized engines as well as their spare parts and spare parts for tractors. For decades, we have been advising and delivering parts to our global network of customers in the shipping, agricultural, and industrial plant sectors. Our skilled service team provide tailored support for our customers. Over the years, we have built up a considerable spare parts warehouse containing several thousand items. Every day we send our customers their required parts as quickly as possible. Since 2006, the company has been based in Wesseling in Germany. Thanks to our favourable logistical position, we have great connections to all traffic routes so we are always able to supply customer orders at short notice.

Website
LASERTECHNIK WÜNSCH

Germany

Lasertechnik Wünsch was founded by Hans Joachim Wünsch, who has worked in the metalworking industry for over 40 years. In 2020, the company celebrated its 25-year anniversary. It has been a huge learning curve, which has seen us go from pioneer to expert. From cut and bent parts right up to finished assemblies: You've come to the right place.Thanks to our numerous partners, we are able to meet any requirement, however complex. The high standards to which we hold ourselves are not only what drive us; they are also reflected in the quality of our service. Our successful 25-year career speaks for itself. Skilled consulting and troubleshooting, supported by our ultra-modern machine inventory, enable us to meet your requirements at the highest level, both technically and economically.

Website
GUSTAV CHRISTIANS GMBH & CO. KG

Germany

Sharpening – as good as new: The long tool life of our machining tools is the reason why our customers commission us to manufacture high-quality broaches time and time again. But even tools of this high quality, made of the best material with a flawless structure and first-rate curing, will experience wear. Our sharpening service, which we perform with the same care with which we produce new broaches, provides you with a precise, high-quality broaching tool again. Contract broaching – we are your supplier: Our employees will do their utmost to perform your task as though it were one of our own. Construction of equipment – of course we do that: Delivery dates – rarely a problem for us. We can't work miracles – but close to it. And after we have impressed you once again with our unbelievable speed and flexibility, you will believe that we can do it.

Website
MARTINREA HONSEL GERMANY GMBH

Germany

Martinrea Honsel is a leading global supplier of light metal products, primarily for the automotive industry. The company produces aluminium components for the engine, transmission, chassis and body of cars and commercial vehicles, as well as for mechanical engineering and other applications using all common casting and rolling production processes. Components from the company reduce vehicle weight, fuel consumption and emissions, and make a significant contribution to environmental protection. Today, Martinrea Honsel employs around 4100 people in 13 plants across five countries. The rolling mill in Meschede is known worldwide as a supplier of aluminium surfaces in the area of bright and anodised materials as well as aluminium plates and rounds. The products are used in exterior components and interior fittings for cars and commercial vehicles, as well as in machine and plant construction, decorative front panels for furniture, suitcases, reflectors for lights, cosmetics packaging and much more. As a niche and specialist producer of high-quality semi-finished rolled products and stamped blanks, the development expertise practised with customers over many years is one of the company's strengths. Within the scope of product development, individual solutions are developed together with the customer, e.g. special material properties, special dimensional accuracy and customer-specific surface requirements for series application. If you have any questions, please feel free to contact us at any time.

Website
KKT KAUTSCHUK- UND KUNSTSTOFFTEILE GMBH

Germany

Manufacture and sale of cellular elastomers in the form of stamped parts, cut-outs, self-adhesive rolls, etc. We are a medium-sized family business manufacturing all products from cellular rubber, foam rubber, plastic foam and cellular polythene. The standard shapes provided are strips, rolls, structural shapes, sheets and rough blocks. Punched parts and laser-cut parts also available. We are also your experts for all products created from self-adhesive sheets. Contact us by telephone or e-mail if you have any further questions.

Website
ERNST THOMAS GMBH

Germany

The company was founded in the 1890s by its namesake Ernst Thomas as a typical ironmongery for the region. Back then, production focused on fittings for wooden crates and forged tools for poking furnaces. After a patent was obtained for the "Muldensteinschraube" (a special screw designed to be used as a fixing point during concrete casting, DIN 529, shape F) in 1909, the focus of production shifted to hot forged and cold formed fasteners. Today, production mainly comprises hammerhead bolts, eye bolts, anchor bolts and special bolts for the construction and mechanical engineering industries. Very long lengths, special sizes, small quantities and short delivery times are our speciality.

Website

Request for quotes

Create one request and get multiple quotes form verified suppliers.

Only relevant suppliers
Data privacy compliant
100% free

Filters

Results for

Il parts

Number of results

97 Companies