control circuit Germany

...Do you need support in the design of electrical circuits or in the preparation of circuit diagrams? ErTeMes GmbH helps with preliminary planning and needs analysis and creates appropriate layouts and circuit diagrams according to your requirements and considering the current standards. We can also take care of further work, such as control cabinet construction, for you. ATEX and SIL safety requirements can also be incorporated into the electrical planning if required. ErTeMes GmbH provides you with a safe, energy-efficient, and professional result.

...Intermediate circuit chokes to comply with the limit values for harmonic currents according to EN61000-3-12, Rsce=120...

... 2,000 bar and 10 Hz can be generated. With the test circuit for hydrostatic and burst pressure tests, pressure ramps up to 3,000 bar can be generated. It is operated on a support arm PC. For pressure tests according to EG79 / EU406 – Section 4.2 Pressure booster for additional supply Displacement volume max. 15cm³ Frequency up to 10Hz Pressure Load Changes as sine & trapezoidal curve...

...For continuous level and temperature measurement of water and wastewater, BD/SENSORS has developed the LMK 307T. The advantage: Simultaneous measurement of level and temperature with separate, independent signal amplification. Maintenance and wiring efforts are significantly reduced. In addition to the classic signal processing of the level, there is an additional signal circuit independent of...

... 24 - 10 with combo base plate up to 250VA, these can be snap-mounted on mounting rails (EN 50022) or permanently installed soon available optionally with fail-safe protection up to 250VA, these are protected against overload and short circuit without additional fusing elements High-quality, tropical-grade vacuum impregnation in polyester resin Ambient temperature 45°C and insulation class 130°C(B...

... bags Production Speed: up to 20 cycles/min (up to 1200 cycles/h) Material for Bags: Thickness of PVC bag body 0.1 - 1 mm, max. width 300 mm, max. diameter of spool 300 mm Material for Check Valve: Thickness 0.1 - 0.5 mm, max. width 45 mm, max. spool diameter 200 mm Machine Control: Omron Pneumatic System: SMC Electrical Switch, Circuit Breaker, etc.: Schneider High-Frequency Generator: Domestic...

... braking current. The regulated braking system allows for high rewinding speeds while maintaining high winding quality. In the event of a wire break or at the end of the wire, a quick stop is initiated via a wire break circuit (all active processing units are braked). An "EMERGENCY STOP," realized through the rewinding machine, is executed using a permanent magnet brake.

...Positive displacement blowers and single-stage screw compressors start up directly or following a star delta circuit if no gentle start or no frequency converter control are available. The unit is subjected to heavy mechanical load and requires high start-up current. For this reason, counterpressure must be reduced during the start-up phase; this is achieved by blowing off the increasing volume...

...Thyristor switches for capacitive loads up to 12.5 kvar at 400V - 50/60Hz for damped and undamped compensation systems compact design, easy installation and connection internal monitoring of voltage and phase position Control signal: 10...24VDC, galvanically isolated Display of operating states and errors via LED cost-effective version directly compatible with reactive power controllers BR6000-T / BR7000-1-TH delay-free switching no network feedback maintenance-free, long lifespan no switching noise...

... from renowned companies such as Moeller/Eaton, Pepperl+Fuchs, or Festo. We are happy to design a control cabinet tailored specifically to your tasks. Circuit diagrams are created in close collaboration with our design department and are implemented one-to-one.

... and non-contacting inductive linear transmitters are used as primary elements of the measuring system, with respect to mode of activation and robustness their design can be compared with that of the valve system of hydraulic control transmitters. The built-in electronic circuit provides for control purposes on its output per axis either a current or a voltage signal with switchable characteristic of the linear or the progressive type. A special design offers the option to incorporate a microprocessor for individual matching of characteristics.

...Mobile through battery operation Usable with all WIKA analysis devices for SF6 gas Operation in a closed SF6 gas circuit Easy handling...

...Control cabinet planning and construction, PLC programming, HMI systems Planning and construction of controls for conveyor and weighing processes, dosing systems, industrial plants. EPLAN P8 for circuit diagram documentation. PLC programming Visualizations for industrial panels or PC-based solutions.

...Precision, Accuracy, and Speed for the Best in Nano-Positioning A standalone single-axis piezo actuator controller with closed-loop control that covers a wide range of demanding applications requiring the best dynamic performance. There are no compromises; the NPC-D-5200 delivers precision, accuracy, and speed. Features: - Precision measurement circuit for capacitive sensors for closed-loop...

... of bronze/stainless steel, in accordance with the regulations of the Drinking Water Ordinance and the recognized rules of technology such as DVGW, DIN, EN, ZSVHK, VDI, as well as the requirements of AGFW and the technical connection conditions (TAB) of the respective utility company. With thermal insulation (optional) With control cabinet Thermomatik or control via the building station Connection variants selectable Performance range according to hot water demand.

...The requirements for housings can vary significantly depending on the application. Sometimes it serves to accommodate a circuit board, while at other times it is designed to house a sensor unit for the ESP system, which you can find in almost every vehicle today. In other housings, a so-called soft component needs to be injected to accommodate, for example, an ultrasonic sensor. We implement...

... specifications, preparing the necessary manufacturing and documentation materials for you. Based on standardized programs, we take on hardware design and PLC programming. This includes, among other things, the design of circuit diagrams/cables and the provision of a user-friendly process visualization system. Our switchgear and control systems, including switch cabinets, control panels, and control boxes, are manufactured in Germany, with assembly and commissioning taking place worldwide. Flexibility and high reliability are a matter of course for us. After the installation of the systems...

...Price Displays with SMD LEDs Hitechled has not only come up with a modern, highly readable digit design for the new HDP series, but has also revamped the protection of the circuit boards. The electronic components are coated with a uniform layer of silicone resin. Additionally, the control board is protected by a Plexiglas cover. All price displays can be ordered with either 4 equally sized digits or a smaller final digit. Up to 8 products can be displayed per side of the price pole. Digit Height: 10 cm LED Colors: white, red, amber, green...

...Performance: 320 kg/h Electrical Power in kW: 2x26 Pressure Regulator: Medium pressure 1.5 bar Ambient Temperature: -20 to +40°C Max. Pressure: 25 bar Gas Outlet Temperature: 50 to 65°C Dimensions (WxHxD): 1600x1800x400mm Voltage: 400 Volt Input: Flange DN25 / PN40 Output: Flange DN65 / PN16 Info: Two parallel connected evaporators. Redundant control circuit with electronic counter and solenoid valve.

... - Machine body painted steel gray - Safety circuit with restart protection - White plastic cover Discover more machines and useful accessories here: https://www.gastro-meurer.de/Technik-Geraete/Kuechenmaschinen/Ruehr--Schlag-u--Knetmaschinen-3464/...

...Active trigger modules for power thyristors. Direct thyristor control through logic circuits with microcontrollers, microprocessors, CPLDs, or FPGAs. The AT411 trigger module is designed for applications where two thyristors can be controlled simultaneously with a control signal input. Function: AC or three-phase control circuits with minimal circuit effort.

...High-efficiency heat recovery system for heating and cooling. EcoCond is a high-performance circuit connection system. Essentially, the system consists of a counterflow air-water heat exchanger in the supply and exhaust air unit, a circulation pump, hydraulic connections, and an integrated control system. Thanks to the economical operation of the system, the life-cycle costs of air conditioning systems can be sustainably reduced.

... circuit for domestic hot water. Variable speed circulation pumps, an expansion vessel, and an integrated tank system complete the equipment. Control is managed via the user-friendly Qio control cabinet. An exhaust silencer for noise reduction is included as standard. The single-axle trailer ensures that the system can be handled on-site by just one person. Optionally, the system can also operate with natural gas or liquefied gas.

...Many customers have complete control units or assemblies manufactured by G&K. Assembly ; Assemblies The advantage – only one point of contact for the entire product. Depending on the requirements, the entire cycle from product development to prototype creation and series production can be managed. Similarly, the combination of our own components with parts provided by the customer, such as circuit boards, housings, sensors, etc., is possible. We would be happy to inform you about the wide-ranging possibilities, also using samples or reference products.

... with a new ECLER potentiometer, an exclusive fader concept with internal sliding pins, designed in ECLER's development department, showcasing spectacular results: The collaboration of both elements allows for over 4,000,000 operating cycles...without noticeable signs of wear! *VCA Voltage Controlled Amplifier The crossfader is linked to this electronic circuit and controls the gain factor of a small...

...Control panels, switch cabinets for the control of industrial processes and systems, machines We manufacture the complete product range in control engineering, from small control boxes to large complete switch cabinets and control systems with and without PLC control. The creation of circuit diagrams using the CAE system Eplan is also included and available as an option.

...We offer cross-disciplinary services in all sectors of industry and automation, worldwide. Our primary company goal is customer satisfaction. Our service offerings: - Automation & Process Control Technology - Consulting & Project Support - Software Development - Database Applications - Plant Modernization - Hardware Planning - Control Cabinet Construction - Measurement and Control Technology for Industrial Plants - Image Processing Systems...

...The SK510-5 compact loader is a combination of cutting-edge technology and decades of experience from Komatsu. The result: A compact, versatile, and user-friendly machine with top-notch performance data. Hydraulic servo control (PPC) Tilt cab for high maintenance accessibility Excellent all-round visibility COMPACT LOADER Versatile in use The additional hydraulic circuit allows for the use of numerous different attachments. The control levers and foot pedal enable the operation of all functions. The "Super Flow" system (from SK714-5) increases the amount of oil available to the attachments.

...), precision resistor technology (individual resistors and networks), and functional coatings (circuit carriers). Our products are utilized in various industries such as industrial automation, measurement and control technology, hydraulics, aerospace engineering, and high-frequency technology. With more than 90 employees in research, development, and production, we create high-quality thin-film components that meet the highest standards of quality, precision, functionality, and reliability, even in areas with extreme requirements.

... Bavarian region, the young company earned a good reputation, so that after the forced evacuation of the business in 1946, it settled in nearby Rehau. In 1956, the newly built building on Sonnenstraße was occupied. From this time on, the company continued to focus on industrial drive technology and expanded its production in the field of control engineering to include circuit boards and the assembly of...