cm components Germany

... volume max. 15 cm³ Frequency up to 10 Hz Pressure change as sine & trapezoidal wave (depending on the expansion volume) Safety test chamber with automatic door Media preparation with dirt & clean tank Feeder for pressure change testing Complete electrical equipment for pressure tests Hydraulic unit with Moog RKP and 55 kW Temperature range: -55°C…+160°C (without climate) Temperature change rate...

... process both precision mechanical parts and large components weighing up to 150 kg and measuring up to 150x100x50 cm. Our phosphate-free pre-treatment for iron, steel, and zinc achieves corrosion protection properties comparable to zinc phosphating. The chromium(VI)-free passivation for aluminum and magnesium meets the standards MIL-DTL-81706B, MIL-DTL 5541F, and is listed under Qualicoat.

...-5 volt output. The CM's onboard electronics are protected by a rugged IP 65 (NEMA-4) stainless steel housing, allowing the sensor to function in ambient temperatures to 70°C (160°F) without cooling. Although small in size, the CM is loaded with advanced features. An RS232 digital interface allows the user to configure all programmable sensor variables with the powerful DataTemp® Multidrop software...

...fats, diluted acids, and alkalis, high stability, good elasticity; very high density 1.25 - 1.5 g/cm³; Thickness: 0.5 - 2.0 mm Applications: Carrier material for abrasives on backing (e.g., grinding discs); punched parts for mechanical applications; deep-drawn components (e.g., suitcase shells, welding masks); electrical insulation material; punched parts for seals; separating film for the production of polyester laminates; carrier for continuous laminates; carrier for plastic decors based on melamine resin; support layer for real wood veneers and deep-drawn surfaces; knife handles...

... metal parts, plastic, cast, glass, ceramics,... (uncoated/painted) Processing time (PV-111): 28 or 42 seconds Adhesive free time (PV-111): 2.5 or 8 minutes Density (DIN EN ISO 845): 0.18 or 0.20g/cm³ Surface hardness (DIN 53505) (ASTM D 2240): 20 or 27 Shore 00 Temperature range: -40°C to +80°C [Short-term up to +160°C]...

...Deburring, edge rounding, polishing of delicate components Centrifugal disc finishing machine Workpiece size: 0.5 mm - 5 cm...

...Design: 7S Material: Stainless Steel 1.4301 Surface: glossy Wall tile acero® consisting of 2 components: Glossy stainless steel sheet 1.4301 with design embossing 7S Carrier made of expanded polystyrene (EPS 60kg/m³) Carton contents: Format 30 x 30 cm: 12 pieces (1.08 m²)...

... voltage: approx. 20 volts pH measurement range: 6 … 13 pH (temperature compensated) O2 measurement range: 0.001 mg/l … O2 saturation (temperature compensated) Conductivity measurement range: 1…1,000 μS/cm (temperature compensated)...

... easy assembly. Delivery includes: - 4 x original European pallets with solid wood block and EPAL stamp, brand new and sanded - our intelligent plug-in set - 8 screws - Delivery to the curbside ... few components, maximum natural product, immediately available! The delivery time is 2-5 working days from receipt of payment. Customized! Call us.

...Window Cleaning Set Unger Glass Cleaning Set with 4 Components Window Squeegee and Holder 35 cm, Microfiber Cover, Bucket 18 L This set includes - the ES350 ErgoTec Window Squeegee 35 cm consisting of handle, rail, and soft rubber - the EH350 ErgoTec Holder 35 cm with reinforced water absorption - the NS350 Microstrip Microfiber Cover 35 cm - a QB120 Bucket with 18 L capacity and hanging option for washer and squeegee...

... affordable price! These are the unbeatable components for a healthy back. Material: Soft PU foam on a base made of wood and metal Seat height: 50 cm without load Seat height with load: 46 cm with a load of 64 kg Seat diameter: 38 cm, base diameter: 46 cm Weight: 5.4 kg Load capacity: up to approx. 120 kg Cover: Knitted fabric made of 92% polyester and 8% elastane, hand washable, available individually Color options: black, gray, blue, red, orange...

...Element Walls from Thomas Concrete Components Element walls are semi-finished products made of reinforced concrete according to DIN EN 14992. They consist of two reinforced concrete panels, each 5 to 7 cm thick, connected by grid beams. They are manufactured in the precast concrete plant and delivered to the construction site. We offer element wall thicknesses ranging from 18 to a maximum of 42 cm and element wall heights of up to 10 m.

... processes. We can cover quantities from 1 piece to 15,000,000 per year. From precision molded parts to very large volume components. All standard elastomer mixtures as well as special polymers such as AEM, ECO, HNBR, and various silicone compounds are processed. Our greatest strength is our flexibility. The modern machinery park, good internal communication, and quick setup processes enable us to meet...

... tolerances shape the design. Our manufacturing takes place at our site in Osterode-Lerbach using the latest injection molding machines with clamping forces of several hundred tons. Our machinery also includes presses for production using Compression Moulding (CM) and Transfer Moulding (TM/ITM) processes. Additionally, cleanroom manufacturing is part of our daily operations. Besides producing pure...