axial bearings Germany

...They take axial forces in only one direction and are a combination of axial cylindrical roller rings, housing washers, and shaft washers. Axial cylindrical roller bearings are often used in applications where the load capacity of axial deep groove ball bearings reaches its limits. Axial cylindrical roller rings consist of a shape-stable cage with one or two rows of cylindrical rollers and have a low axial height. They are used in combination with housing washers or shaft washers.

...The combined bearings (axial and radial bearings in one housing) are designed for the most demanding applications in turbomachinery regarding speed, load, and rotor dynamics. The combined bearing is space-saving and can accommodate both high radial and axial loads due to the tilting capability of the individual segments.

...The use of high-precision radial groove ball bearings is especially recommended when axial forces are supported in two directions, but the installation space makes the use of a spindle bearing pair impossible; plus when the best-possible guide for rotating components is needed, but the RPM requirements are less important. Depending upon the load capability and the installation space available...

... window hinges, fire doors, etc. Ball bearings facilitate movement, reduce friction and wear, thereby enhancing the quality of the product. The use of ball bearings means smooth operation, which translates to a significant competitive advantage for many products. Schulz Stanztechnik supplies precisely the right axial fixed ball bearings for a wide range of manufacturers: Locking and fastening parts industry, furniture industry, shutter manufacturing, door and gate manufacturers, automotive suppliers, and more.

... absorbed in both directions.\n\nTandem Arrangement (DT): In this bearing arrangement, the contact lines are arranged in parallel. The axial load capacity is twice that of a single bearing, but only in one direction. Therefore, this bearing pair must be positioned against another bearing or bearing pair.\n\nUniversal Design (U): Universal bearings can be paired in any arrangement as specified above. It must be taken into account that the bearings require the same preload."}...

... Protection Class:Protection class IP 50 (Other protection classes on request) Ambient temperature:Ambient temperature at the operating location: +10 °C to +40 °C Bearing:Precision roller bearing with high moment rigidity and concentricity and axial run-out accuracy. Lubrication:Lifetime lubrication with input speed ≤3000 and ED ≤20%. Options:Blocking air connection, Application on temperature range -40 °C to +80 °C...

... provide slow lubricant release and can rotate freely in relation to the runner body. Self-aligning systems in two planes: axial up to 3.9 mm, radial up to ±2°: High dynamics through roller bearings V = 9 m/s, A = 20 m/s² Uniquely quiet with ground raceways: Robust and resilient thanks to the steel runner body. Available in 5 different sizes: 18, 28, 35, 43, 63 mm Max. travel speed: 9 m/s (354 in/s) (depending on the application) Max. acceleration: 20 m/s² (787 in/s²) (depending on the application) Max. radial load capacity: 15,000 N (per runner)...

...Axial Needle Bearing Axial Cylindrical Roller Bearings (without axial bearing washers) Other terms: axial washer, axial needle bearing, compensating washer...

...Axial cylindrical roller bearings enable highly load-bearing, shock-resistant, and rigid support with relatively low axial space requirements. They are unidirectional and thus suitable for accommodating axial loads in only one direction. Axial cylindrical roller bearings are used where the load capacity of axial deep groove ball bearings is no longer sufficient.

...The multi-stage Rollway axial bearings are available in 2 to 8 stages to meet specific design requirements. Various designs and external dimensions.

...Completely assembled axial ball bearings in various steel grades or pure ball retainers made of steel or plastic provide suitable solutions for axial rotational movements. For higher load ranges, particularly double-row ball bearings are suitable, as their design makes them significantly more stable than single-row ball bearings. At the same time, this increases the service life, thereby enhancing the quality of your products.

...Franke rotary tables type LTA are light, compact, ready to install positioning units for speeds up to 100 rpm. They are highly loadable and have excellent concentricity and axial run-out accuracy. Rotary tables LTA are versatile and are particularly suitable for light machining tasks as well as dynamic handling and assembly applications. Base plate:Aluminium Housing:V2A Race rings:54SiCr6...

... W300. This combination provides particularly good gliding and wear properties in relative movements. Loads The load carrying capacity of the spherical igubal® thrust bearing is very high in normal ambient temperature. In particular cases the load carrying capacity of the axial bearings should be checked in a practical trial with high constant loads and at higher temperatures. Coefficients of...

...Like all Hense rotary vane motors, rotary vane motors in the HSS series are designed according to the rotary vane principle. The drive shaft has axial and radial plain bearings in coated bushes. The coating used is tribologically optimized and ensures low wear. Sufficient lubrication of the bearing points is ensured by the supplied hydraulic oil. To reduce the internal friction of the motor, the...

...The D-frame solenoid LCL is characterized by a compact design, low power consumption and short switching times. A long service life is promoted by the precision steel tube housing and maintenance-free armature bearings. The frame solenoid can be installed in any position, with the force preferably being applied in the axial direction only. It is fastened via threaded holes on the side or on the...

...Material Description: Bearing block and slide made of aluminum alloy, anodized. Guide columns made of stainless steel, ground. Spindle made of stainless steel, rolled thread. Guide with plain bearings, maintenance-free. Position indicator made of plastic. Design: Radial play of the guide less than 0.02 mm. Axial play is free of play. Spindle is self-locking and can be additionally clamped. Note...

...COM-KU®/S is a self-lubricating and maintenance-free plastic plain bearing. However, additional lubrication is possible. It is well suited for simple applications and axial movements Support material/Carrier material:Plastic bearing produced in injection moulding process Static load:≤ 70 N/mm² Dynamic load:≤ 40 N/mm² Sliding speed:≤ 1,0 m/s Friction value:0,08 up to 0,20 µ Temperature strain:-50 up to +100 °C Max. PV-value:0,6 N/mm² x m/s Humidity absorption:0.1 % at 20 °C in 24 h Housing Ø:H7 Bushing inner ø after mounting:E10 Shaft tolerance:h - tolerance (recommended h9)...

...Two-stage gear drive with solid shaft Gear Type: SN4F Motor Type: Three-Phase, Direct Current and Permanent Magnet DC Mounting: Flange Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

...Axial deep groove ball bearings consist of three parts: - Shaft washer - Ball ring - Housing washer. The individual components are not rigidly connected, which has the advantage that the ball ring and the bearing washers can be assembled and replaced individually. These bearings are used when high axial forces need to be absorbed. Therefore, they are also referred to as thrust bearings.

...Highly loadable in both radial and axial directions. It is usually installed in pairs. Common applications include wheel bearings.

...The compact design makes the GSD series the optimal high-end gearbox for applications in confined spaces. The robotics output flange ensures maximum torsional stiffness. Due to the low backlash, the GSD series is ideally suited for high-dynamic applications where the highest precision in positioning and speed is required. The GSD series comes standard with maximally rated, preloaded deep groove ball bearings – it is also available with tapered roller bearings for handling higher radial and axial forces.

...Cylindrical rollers are used for bearings with high and heavy requirements. Multi-row cylindrical roller bearings can accommodate both axial and radial forces. Our high-precision cylindrical rollers, like our other rollers, are manufactured in our facility in Italy. We produce various designs with ground and unground end faces. Additionally, we profile rollers with the so-called ZB profile...

...{"Features":"— Permanent magnet DC motor\n— Graphite-copper brushes\n— Zinc-coated housing\n— Ball bearings on both sides\n— Consolidation image according to DIN 42016\n\nGeneral Data:\n— Lifespan under Mn: >3000h\n— Allowed axial load on shaft: 180N\n— Allowed radial load on shaft: 350N\n— Insulation class DIN VDE 0530: E\n— Protection class DIN VDE 0530: IP 40\n— Electromagnetic compatibility (EMC) protection: 2 x L (3uH)\n\nAC DC: DC\nType: synchronous\nVoltage: 10 V...50 V, 5 V\nOther features: with permanent magnet"}...

...Retaining rings are among the most commonly used components alongside screws, nuts, washers, rivets, rolling bearings, and other mass-produced and standard parts. They stand out from other machine elements for the axial fixation of components on shafts and in bores due to their favorable price, easy assembly, and the straightforward and cost-effective manufacturing of the grooves for...

...D80 Thrust Ball Bearing, made of galvanized steel The D80 thrust ball bearing is available in various designs and sizes. The D80 thrust ball bearings are suitable for accommodating axial loads. Swiveling and rotating movements under load can be realized with this product. The thrust ball bearings are made of galvanized steel. The load capacity ranges from 50 to 250 kg. For more information, please visit our website at http://www.bs-rollen.de/ or contact us by phone at +49 2191 59217-0. Item number: D80 Origin: China Brand name: BS Rollen...

...Magnetic absolute multi-turn rotary encoder in heavy-duty stainless-steel design – batteryless, robust and flexible. The WV42HD is predestined for demanding measuring jobs in the heavy-duty area owing to its extremely robust housing,  its bearings, which are designed to tolerate high radial and axial loads as well as its high resistance against external impact. Heavy-duty design in stainless...

... displacement and angular misalignment ➜ Coupling elements available with different stiffness ➜ Easy assembly through axial connection ➜ Reduced axial return forces thanks to sliding bearings ➜ Drill-proof ➜ Maintenance-free ➜ For ambient temperatures ranging from -40 °C to +80 °C ➜ Application examples: cable cars, mills, crushers, high-power compressors Type: Flexible Intended use: For compressor...

...single-row, metric universally applicable capable of absorbing radial and axial forces high speed suitability Deep groove ball bearings are the most commonly used type of rolling bearing. They can accommodate not only radial but also axial and combined forces, making them particularly suitable for high speeds. Deep groove ball bearings are non-separable and allow only a small tilting angle.

... bearings, can also accommodate radial loads and high speeds. They are high-precision units made up of stable outer rings, ball races, and one- or two-part inner rings. Type designations: 7602.. /7603.. (double-sided acting, restricted tolerances, with pressure angle α = 60°) 2344.. (double-sided acting, restricted tolerances) ZKLN.. (double-sided acting, with lip seal or gap seal, optionally paired) ZKLF.. (double-sided acting, with lip seal or gap seal, optionally paired, screwable) Axial cylindrical roller bearings ... consist of...

...Rotary joints are high-load moment bearings with mounting options on both the inner and outer rings. They are always custom bearings specifically designed for high moment loads at low speeds. Rotary joints are used for the support of swivel drives, turntables, or drive units in forklifts. In this context, rotary joints and slewing rings are also installed horizontally and transmit high axial loads and moments as individual bearings.