as rubber Germany

... and application, we use sliding bushings, support discs, or wire rings to stabilize the rubber bellows. Due to the absolute tightness of the bellows, appropriate air compensation must be ensured: upon request, we can also provide ventilation and exhaust openings. Classic fastenings: sleeve, flange, sleeve with flange, cup flange, or other fastening forms.

...Die-cut parts made from cellular rubber for use in the automotive industry. Cellular rubber is a closed-cell elastomer without an outer skin. Unlike foam rubber, it can also be used as a seal without a skin due to its cell structure. It is characterized by high elasticity, aging resistance, and excellent density properties. Cost-effective and precisely die-cut, available in smaller series or, for special requirements, alternatively water jet cut. Also available as sheet material. At the customer's request, it can be equipped with self-adhesive backing on one or both sides for easier installation.

...The brake pedal (also known as the foot brake lever) is the control mechanism for the service brake system in almost all motor vehicles. The rubber cover prevents slipping during braking.

...Heavy rubber hose line with fine-wired aluminum conductor for medium mechanical stress in dry, damp, and wet areas, outdoors, in agricultural and commercial operations, and on construction sites, as well as for permanent use in fresh and utility water. For connecting, e.g., submersible pumps, tools, devices, and machines, portable generators. Also suitable for fixed installation directly on...

... ultra-pure water is optionally available through an additional module. Upon special request, there is also the option to silicone rubber items or apply other surface coatings. The W30 is loaded and unloaded using interchangeable baskets. These are compatible with our cryogenic deburring system E30W and are ideally suited for a linear subsequent processing line → Production → Deburring → Washing → Tempering, as the batch interchangeable baskets can be used compatibly with the respective machines.

...Rubber compensators are excellent for protecting pipelines from thermal stresses and vibrations, helping to avoid annoying defects or costly plant downtime. Our OG series compensators are versatile and effectively absorb both lateral and angular as well as axial vibrations. In addition to our standard compensators with EPDM or NBR bellows combined with galvanized steel flanges or socket...

...Cellular rubber made by KÖPP is the ideal material for sealing, insulating, damping, and as a rattling protection.

...• Extreme low consumption • For difficult to access and delicate parts • For manual blasting operations • Adaptable for use with every type of robot • No build up of ice, as thermally insulated • With CO2 quantity controller...

... injection molded parts. For this, we offer various processes such as 2K / 3K injection molding or insert and outsert techniques. We provide attractive conditions for small and medium quantities and handle the complete logistical processing. Our experienced product designers are happy to assist you in the design and development of your suitable plastic parts to achieve optimal results.

...Ergonomic workplace mats and rubber mats as important relief for employees in standing workstations and other specialty mats / anti-vibration mats.

...Pressure range: 9.3 - 24.8 N DIN EN 14404 The outer shell and the bellows are made of rubber-like plastic and are particularly suitable for sensitive surfaces, as they leave no abrasion.

...Preformed silicone heaters are useful for diamters as small as 12 mm and up to 100 mm. Rounded silicone heaters are not possible with self-adhesive foil. Spiral Wrap Pre-Formed Silicone Rubber Heaters are suitable for tubes and flexible pipes and hoses with Ø 6,35 mm (1/4"). Spiral formed flex heaters can be used up to Ø 12 mm (the length of the stretchable silicone spiral wrap heater is...

... chain driven undercarriages with different characteristics. These include a relatively low ground pressure as well as a 360° turning capability and a good offroad capability on almost any terrain. We also offer you the right drive for special applications. These include, for example, highspeed tracked undercarriages or extendable tracked undercarriages. As a result of the use of highquality components and the optimisation of the interaction between them, the chain driven undercarriages we offer are characterised in particular by their low wear and a high level of comfort.

...), sliding belts, Supergrip (rough top), as well as cross-stable belts complete our range. To achieve a stable and durable endless connection, our conveyor belts are standardly hot vulcanized. Alternatively, we can equip your belt with mechanical connectors (steel or stainless steel) or simply prepare the belt ends for onsite vulcanization. Customizations with wave edges, wedge strips, block cleats, T-cleats, guide rails, carriers, or perforated (e.g., chain conveyor belts, screening belts).

...The extremely soft film is coated with an aging-resistant natural rubber adhesive. Application area: Masking and wrapping of insulation materials such as mineral wool or foam in HVAC and sanitary technology.

...AUTOSOL® GUMMI PFLEGE FLÜSSIG Prevents sensitive rubber parts, such as door and windshield seals, from freezing. Develops a caring and protective effect. Item number:10 006501...

...Cellular rubber (commonly referred to as foam rubber) is a closed-cell elastomer used for sealing, insulating, damping, and shock absorption. We supply cellular rubber in EPDM, NR, NBR, SBR, and CR in numerous variations according to your individual specifications: - Sheets - Cut pieces - Stamped parts - Machined parts - Strips If desired, all delivery forms are also available in self-adhesive versions.

...We offer profiles in various qualities such as standard qualities, certified special qualities KTW-DVGW-FDA, electrically conductive, foam rubber, and hard rubber, suitable for all areas as: edge protection, clamping profiles, U-profiles, square profiles, round cords. Click here to view our related catalog page.

...Rubber wheel B61 with roller bearing and blue elastic tire. Wheel diameter 80-200 mm, wheel body made of plastic, load capacity from 150 to 400 kg. The rubber wheel B61 features a blue elastic tire as its tread and a plastic wheel body. It is available in 6 different versions with a wheel diameter of 80 - 200 mm and is equipped with a roller bearing. The wheel width is 32-50 mm with a hub length...

... offer individual solutions: » Other colours of the rubber coating » Harder rubber coating » Printed rubber coating according to your specifications » Other mounting options (such as external thread) » Higher adhesive force Article number:AS070HFC-00s-00 L mm:70 B mm:50 H mm:13 Force* N:45 Force* N ¹:14 Shear force* N:20 Weight g:125 Temperature °C:120...

...Rubber-metal connections are effectively used for damping and insulating vibrations and noise, as well as for elastic mounting and decoupling.

...The rubber processing industry, as well as the tire production process is supported by Micro-Epsilon with a range of systems for inspection, monitoring and control of miscellaneous processes.

... coated paper and then covered with a film of lacquer. At the finisher, the printed sheets are then moistened with water, allowing the decorations to slide off the paper and be transferred onto the item. A cloth or rubber squeegee is then used to remove the water from beneath the image. After a drying time of about 6 hours, these can be fired in a dishwasher-safe manner at temperatures between 560° and 1250°C, depending on the color used.

...In addition to our battery systems, GW Batterien also offers you numerous special products which can make your day-to-day work easier. Our moulded parts made from rubber are just such products. They offer numerous benefits for example as tread thresholds substituting for metal bars. While metal bars can buckle and there is a danger of slipping if they get wet, a tread threshold made from rubber is stable and safe at all times. Our moulded parts made from rubber Tread thresholds Noise protection Silent block Mats etc. ...

...Before an injection mold is ordered, we create sample parts for you as laser-sintered elements or using 3D printing. This allows you to view the desired part without spending a lot of money. Our machines inject molded parts ranging from 5 to 6000 grams.

...Our standard colors for thermoformed inserts are: Transparent, White, Silver, Gray, Black. Custom colors are available upon request. Thermoformed logos and texts can be incorporated into the insert, and various surfaces such as smooth, glossy, and textured can be chosen. Thermoformed inserts with a smooth surface are excellent for wipe disinfection, which is particularly relevant in the field of medical technology.

... feed rates with low noise levels. Even delicate tasks, such as creating the thinnest webs and ribs, can be accomplished with minimal milling pressure. The tools are dynamically balanced in two planes, ensuring high operational smoothness and low vibration, which is reflected in perfectly clean surfaces. Additionally, the milling heads are interchangeable, providing high flexibility and quick replacement in case of wear. The interchangeable heads are available in ball, straight, radius, or 45-degree configurations.

...Current Situation Seals are a key component in many industries and are often used in safety-critical areas. They require two relatively flat surfaces to prevent the leakage of media such as gas or liquids. Challenges: The sealing surfaces are often made of highly polished metal. This can create reflections that need to be eliminated during optical measurement. SourceTech Solution The Q5 laser...

...The fields of application for our linear stages LT and PT are widely spread. They are used where highest requirements on straightness deviations, noise behaviour or positioning accuracy are demanded. Stepping motors and backlash-free recirculating ball spindles are used as standard drive. Due to the usage of selective cross roller guides, highest accuracys are achieved which are recorded in the final check. For the adaption and mounting of the linear stages, several threads in grid layout are provided so that they can be combined to multi-axis positioning systems.

...For hightech accessories, we use materials such as Arnite, Grivory, Ryton, Ultem, and Ultrason (partially filled with up to 50% glass fiber). Furthermore, we are able to achieve the highest degree of precision both in concentricity and in measuring range, thanks to our tool concepts that provide for innovative cooling and for the use of innovative molding materials.