aluminium sheet processing Germany

...we process thin sheets, heavy plate, wear-resistant sheet and plate. aluminium sheets, stainless steel sheets, copper sheets, brass sheets and much more, with formates from 3000 to 8000 mm (118" to 315"), with thickness 1 mm – 180 mm (0,039" to 7") welded sheet metal structures, aluminium constructions, industrial profiles...

...Use our industrial manufacturing expertise for your products too ,Manufacture of silicone or aluminium moulds ,Gas internal pressure procedure (GIP) Processing of sheet plastic (cutting, milling, bending) More information available at https//www.geck.de...

... sheet metal in the industrial metal construction sector as it is capable of machining large steel components with a sheet thickness of up to 3 mm. For our Kraftformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). • choice of two preselectable stroke speeds • adjustable reverse position • 4 storable processing programs...

...Pressteck is one of the world's leading specialists for deep-drawn individual parts on transfer presses and their processing into assemblies. In this non-cutting tension-pressure process, we produce hollow parts from a metal strip in several stages, which can be aluminium, stainless steel, copper or brass, among others. Compared to other processes, deep drawing has decisive advantages: Material...

...lightweight aluminium panel, where a cover sheet is connected to a corrugated aluminium sheet in a continuous manufacturing process material with highly anisotropic stiffness, resulting in a very simple two-dimensional shaping is possible (see video) simple processing of the material with standard tools high corrosion protection since all used aluminium sheets are pretreated with a primer 100...

... the special surface finish. Now designers and manufacturers have the benefit of lightweight aluminum facades, while they can offer the highly desirable aesthetics of stainless steel to end users. In addition, SSL BF can be supplied without anodizing and is then suitable for batch anodizing. Alloy:EN AW 5005 (AlMg1-B) Temper:H14 Available thickness in mm:0.5 – 3 Available sheet width in mm:1000...

... as polishing paste, paint, plastic, release agents, oil carbon or lime can be easily removed by using the right cleaner. The workpieces are cleaned within a few minutes. The cleaning result is always perfect and reproducible. The subsequent rinsing process is followed by stain-free post-cleaning or preservation. The WIWOX® ultrasonic cleaning process can be used for all steel moulds as well as brass and copper parts. Especially tools for injection moulding, extrusion, rubber processing, aluminium die casting and gravity die casting.

... over welded nuts: corrosion-resistant no weld spatter on the thread no thermal weakening at the fastening position self-piercing higher torque requirements high process reliability in fully-automated processing flush-mounted processing processing can be manual, semi or fully automated self-locking thread possible Feature (1):corrosion-resistant Feature (2):no weld spatter on the thread...

...It is annoying when you have to reclamp individual workpieces. Why not just produce workpieces entirely in a single set-up? Products can be planed in one clamping process using a moulder head on your CNC machine and can be finished using additional units. Moulder heads are suitable for processing products made of solid wood, sheet products such as MDF, plastic or similar materials. Not even large cutting volumes can push the unit to its limits. Lubrication:Oil bath Max. drive speed:10,000 rpm Transmission ratio:1:0.9 Max. drive torque:25 Nm Weight:about 7.5 kg Max. tool diameter:Ø 125...

...SURVOS products are optimally suited to sheet metal forming, machining and assembly technology. Our SURVOS has also been successfully used in cutting and punching aluminium sheets, steel sheets, copper and brass sheets, in cold profiling, bending, embossing, sawing and drilling aluminium profiles for decades. SURVOS – 100% residue-free* evaporating metal processing oil. SURVOS Rapid D...

...With our saws and profile processing centers, we are able to precisely cut sheet metal and profiles on request. Elumatec DG244 double miter saw for lengths of up to 6000 mm, high-quality cutting of profiles made of aluminium, PVC and light metal alloys. Cutting profiles made of aluminium, PVC and non-ferrous metals with our SBZ-151 5-axis profile machining center from Elumatec. Material:Aluminium, plastics, Non-ferrous metals etc.

...plastics processing industry, sheet metal processing industry, telecommunications, tank- and container construction. Strength classes:3.6 – 12.9 Materials:Machining steel (11SMn30Pb) CuZn–alloys Stainless steel A2–1.4301 Aluminium diameters:Rd. 2 mm up to Rd. 10 mm lengths:8-160 mm or on request...

... (hydraulic lift for loading the trailer). The capacity of each of the hall cranes is around 100 tons of unit weight. The modern machinery available at Hilgefort for metal processing includes the following: Fine plasma/oxy-fuel cutter, 3.5 m x 28 m Three-roll bending machine, 3.0 m x 12 mm sheet thickness for vertical processing Four-roll bending machine, 3.0 m x 80 mm sheet thickness Four-roll bending machine, 3.0 m x 35 mm sheet thickness Three-roll bending machine, 3.0 m x 12 mm bending thickness Three-roll bending machine, 1.5 m x 5 mm bending thickness Three-roll bending machine, 1.2 m x 3 mm...

... transport. All sheets are coated with a laser-compatible protective film, allowing for further processing afterward. a) Slip-resistant shot-blasted sheets: • Slip resistance class R11 • Material: 1.4016 / 1.4301 / 1.4401 / 1.4404 / 1.4529 1.4539 | 1.4541 / 1.4571 / 1.4841 • Length: up to a maximum of 6,000mm • Width: up to a maximum of 2,250mm • Sheet thickness: 1.0 – 25mm b) Slip-resistant ground sheets: • • Slip resistance class R13 • Material: 1.4016 / 1.4301 / 1.4401 / 1.4404 / 1.4529 1.4539 / 1.4541 / 1.4571 / 1.4841 • Length: up to a maximum of 6,000mm • Width: up to a maximum...

... Stock Exchange. Initially, Zhongwang focused on the production of aluminum extrusion profiles. Over the years, however, the processing capabilities have steadily expanded. Today, Zhongwang is capable of manufacturing complete railway car bodies and vehicle components. In June 2011, the wholly-owned subsidiary Tianjin Zhongwang Aluminium Co Ltd. was established. Currently, one of the largest and...

... employees carry out all sheet metal processing tasks at the highest quality level and on time. Here's how our service works: configure sheet metal parts online, request quotes for comparison, and conveniently choose the right manufacturing partner.

... Approximately 65% of our products are exported to Europe and North America, and we take pride in offering high-quality metal products that meet the highest quality standards. Our range of services in sheet metal processing includes laser cutting, flame cutting, bending, edge bending, machining, welded assemblies, and surface treatments. With modern manufacturing facilities and an experienced team, we...

Lasertechnik Wünsch was founded by Mr. Hans Joachim Wünsch, who has been active in the metal processing industry for over 40 years. In 2020, the company celebrates its 25th anniversary. It has been an incredibly educational time that has transformed us from pioneers to experts. From cutting or bending parts to the finished assembly: You are in the right place with us. Thanks to our numerous...

... limits of deformability for you. But that's not all: In collaboration with qualified partners, we offer you the complete spectrum of further processing and refinement of your products. From the classic to laser welding... talk to us. We are also available to assist you in the early development phase of a product with experience, know-how, and creativity. Our facilities: Stamping machines and eccentric presses: 6 to 250 t Deep drawing presses: 25 to 400 t Progressive presses: 100 t...

...-performance band saw machine, we cut your steel to the fixed length you desire. Network: If we don't have a material on site, we rely on a large international network of dealers, manufacturers, forges, and processing companies. This way, your request won't fall through the cracks. Logistics: Whether courier services, freight forwarders, sea freight, or air freight – we know who to work with to get your...

... provides all the prerequisites for optimal solutions for demanding perforated plate products. Minimal tolerances, utmost precision, and cost-effectiveness are a matter of course. With the latest laser technology, we offer additional production possibilities for intricate perforated sheet solutions. We process uncoated steel, galvanized steel, coated steel, stainless steel, non-ferrous metals, plastic, hard fiber, and cardboard with thicknesses ranging from 0.2 to 20 mm. Take advantage of our expertise. We are here to assist you with your perforated sheet problems – from the very beginning.

..."When Tradition Becomes Passion" Dear Sir or Madam, We, Mittag GmbH from Ebersbach-Neugersdorf, in the heart of Upper Lusatia, are celebrating 121 years of experience in aluminum and sheet metal processing this year. Since then, as a family-owned business, we have been supporting our customers throughout Germany with any questions regarding aluminum processing. Our extensive stock range of...

...window sills, window frame profiles, ventilation grilles, edge parts, covers, roller shutter boxes, parapet covers, box sheets, cassette panel sheets, gutters, as well as custom parts according to drawings based on customer requests. Smaller welded constructions made of steel, aluminum, and stainless steel are also part of our offering. In the online shop, we are present on many marketplaces. Since we manufacture all sheet products ourselves, we can specifically and cost-effectively realize your customer requests!

... constructions, and frames - Precision shafts, bolts, bushings, flanges, - Beams & columns, tension rods, pistons - Rollers, eccentric shafts - Guide rails, sliding rails, wear plates - Industrial knives, shear blades - Bending and folding tools for sheet metal processing according to drawing SEMI-FINISHED PRODUCTS & FORM PARTS: - Tool steel cuttings - Rolled rings - Free-form forged parts - Forged...

... technologies Aluminum Processing Aluminum profile processing in all sizes and processing techniques as well as machining of aluminum forged and cast parts Precision turned parts Bar and piece machining on CNC short-turning machines Laser & punching technology Complex sheet metal processing, conventional punching techniques.

...UTS is a medium-sized company located in Stuhr near Bremen. Here, we manufacture high-quality series, small series, or individual pieces. Intelligent process management, state-of-the-art machines, and high-performance CAD/CAM systems ensure smooth operations in all phases of production. Focus Areas • CNC-supported manufacturing • Special machine and plant construction (development, design, production) • Customized solutions • Mobile and stationary hydraulics (including service) • Trade in construction machinery spare parts • Technical processing • Sheet metal processing...

We are a flexible, growing service company in metal processing and sheet metal processing. We manufacture innovative solutions for our customers, ranging from small series to medium series. Primarily, we focus on custom product requests. We do not have our own products in our range.

... SHEET METAL PROCESSING Very few laser cuts leave our facility without further processing. In addition to simple machining steps such as threading, reaming, and countersinking, the main technology is clearly bending and rolling, which can be complemented by welding and spot welding. With the combination of laser - bending - welding, we are capable of producing small assemblies completely. We also...

CNC - Sheet Metal Processing from Passion ... for more than 120 years, MEILLER Lifting, Storage, and Environmental Technology has been based in the heart of Sauerland. The optimal interaction of all components within one company ensures the best quality and service.

... The company's "second pillar" consists of steel construction, steel and welding structures of all kinds, general sheet metal processing, and the manufacturing of machine frames and housings. Over the years, the production hall has been expanded several times, and an administrative building has been added. On 3,000 m2 of production space, products designed at four CAD workstations, weighing up to 15...