air oven Germany

Bartscher GmbH is one of the leading companies in the large kitchen industry in Europe. The product range includes a wide selection of professional equipment, practical kitchen aids, and innovative product solutions. Everything needed for efficient operation in modern large kitchen businesses. Since 1876 on the market Since its founding in 1876, Bartscher has developed into a full-range supplier...

... is suitable for use in scientific laboratories, educational institutions, medicine, and industry. Available in stainless steel and regular steel versions. SNOL 75/350 - Suitable for electrodes up to 40 kg and a length of 45 cm - Temperature adjustable from +50 to +350 °C - Outer casing – gray, powder-coated steel sheet - Robust steel constructions ensure the longevity of the product - Natural air convection - Thermal insulation wool ensures energy efficiency of the oven, keeps the electrodes hot, and protects against moisture...

... substrate by high-temp tape or screw, or spot-welded into position Placed at critical points on the product, thermocouples enable temperature profiling with a DATAPAQ Oven Tracker. All DATAPAQ probes conform to the highest standards and provide the most accurate data possible. Max. temperature (standard):265°C (509°F) Max. temperature (Exposed Junction Thermocouple - Hig Temperature):500°C (932°F) Cable length:0.8 m; 1.0 m ; 1.5 m; 3.0 m; (2.6ft; 3.0 ft; 5 ft; 10 ft) standard Accuracy:Specified to ANSI MC96.1 Special Limits of Error (±0.4% or ±1.1oC/±2.0oF, whichever is greater)...

... application you can have energy savings up to 15 %.     A bigger construction is the Thermo-Fluid M, which is optimised for utilisation of waste heat from process air, flue gas or exhaust air. An energy yield of up to 1600 kW is possible, whereupon the pressure drop in the process air is less than 1.5 mbar. The pressure drop in water circuit is less than 200 mbar.   This Shell and Tube heat exchanger is low maintance using the small type of construction. The Thermo-Fluid M modular and the standard temperatures are up to 300°C too.    Both Shell and Tube Heat Exchangers are low maintance. One-off or...

... temporarily protected against corrosion. Final drying can be accelerated by blowing with compressed air, a warm air stream, or treatment in a drying oven. WIWOX® 340 can be used at a concentration of 5 – 7%. The dilution with water depends on the degree of contamination and the intended exposure time. The bath should have a temperature of approximately 60° C. For precision engineering, longer exposure times are possible depending on the level of contamination. Available packaging units ▪ 30 kg canister Appearance: Yellowish Density: 1.14 g/cm³ pH value: < 10.5...

...For aluminum special profiles Roller hearth furnace system as solution annealing furnace and heat treatment furnace, air quenching, water bath, and roller tracks...

...-Temperature controlled heating fan provides ideal heat circulation -Hot spots, heat shadows or exothermic problems are prevented by the turbulent warm air -Enclosure protects against changing ambient conditions, e.g. cold draft -Easy adaptation to different geometries -Homogeneous temperature distribution due to optimal flow and turbulence -Ideal for mobile oven systems or local heat treatment -Operation via smart device or integrated control panel ...

...•Available in different volume. •Controller with colored touch screen display. •Programmable PID microprocessor control system. •Programmable temperature and timer function •Temperature range: ambient temperature + 5 °C to 250 °C •Air forced convection •High temperature accuracy •2 chrome-plated racks •Beautiful and functional stainless steel Chamber •2 years guarantee worldwide...

... air circulation in your drawer oven according to your needs. In general, we recommend a horizontal air flow. This allows the heated air to distribute evenly and uniformly across each drawer. However, other air circulation options are also possible to ensure homogeneous air distribution and thorough heating of your component. Use your drawer oven for the following applications in industrial heat treatment: Aging, hardening, heating, tempering, drying, preheating.

...-making craft as well as fireclay – this applies to the combustion chamber just as much as to the flues and the outer shell. We strive to create the best possible conditions for our customers' work: among other things, through high dimensional accuracy and ease of processing of our material, as well as a wide selection of stone and slab formats, allowing your individual design wishes to be flexibly realized. Of course, the properties of our oven fireclay comply with the specifications of the Technical Regulation for Oven and Air Heating Construction (TR-OL).

...4CR Air Dry is a high-quality clearcoat for fast and efficient refinishing (express technology), does not require oven drying. Cures very quickly at a room temperature of 20° C and can be polished after only approx. 60 minutes. With 7240 HS Air Dry, large savings are possible by eliminating heating-related costs. To be mixed in 1:1 ration with 4CR 0418 Express hardener Reference:6.7240.2500    ...

...Electric heated circulating air drying oven for the thermal treatment of various materials and components up to 350 °C.

...Inflatable seal, here made from reddish-brown high-temperature AL-silicone profile (temporarily loadable up to 230° C) endlessly vulcanized. The air connection is made of stainless steel and designed according to customer requirements. Other manufacturing variants can include round, rectangular, U-shaped, and endless forms. Examples of applications for inflatable seals of this type are, for instance, oven door seals and container lids.

...Löcher chamber kilns are manufactured in a robust, distortion-resistant design and equipped with excellent sealing systems. They are primarily used in forging plants and for the treatment of high-quality products. The seals at the sensitive points of the chamber car and door are perfectly designed, reliably isolating the oven atmosphere from the surrounding air. Through a heat exchanger that...

...Heat resistance of class H (up to 180°C) max. voltage: 6.6 kV max. outer diameter: 1,850 mm max. length: 2,300 mm (stator) max. length: 3,200 mm (shaft) max. crane load: 6.3 t Drying in a circulating air oven: max. dimensions: 2,000 x 2,000 x 3,000 mm max. temperature: 140°C...

... vertical and horizontal airflow with preheated air at the exact temperature, an extremely uniform temperature distribution is achieved within the oven interior. The products to be treated are thus heated homogeneously and can be precisely adjusted according to the complexity of the process with customer- and product-specific heating or cooling ramps regarding the required product properties.

...Double Screen Printing Oven in Recirculation Operation, with Swing Doors The adhesion water dryers, powder curing ovens, paint dryers, and screen printing dryers manufactured by ARTAX Lackieranlagen GmbH operate as recirculation dryers or recirculation ovens, where a specific amount of recirculated air is directly expelled outdoors. These systems can be designed as continuous ovens or chamber...

...Excellent surface quality, environmental protection, and state-of-the-art plant technology have propelled "powder coating" to success – and not just for series parts. Heimer plans, manufactures, and assembles complete powder coating systems. The plant technology for pre-treatment and air/oven technology is produced entirely in-house. For large parts, Heimer offers complete coating booths that operate without powder recovery, followed by thermal treatment in batch operation.

...Support grids or floor support crosses rest on the oven base and separate it from the retort for optimal air circulation.

... station, washing machine with salt recovery, chamber tempering furnace, and charging cart. The heat treatment goods are transported on special transport racks using the rail-guided charging cart, either via manual control or in automatic mode from station to station. Batches weighing up to 1200 kg can be heat treated. The salt quenching bath with air or water cooling is designed for both bainitic and martensitic hardening. Possible heat treatment processes: - Annealing - Tempering - Hardening - Quenching - Carburizing...

... sides and in the middle of double-door ovens, and can be placed on the oven if needed. Hot air is blown between the profiles through the specially designed oven door, and the heat is distributed homogeneously. The oven floor is designed so that a single cart can enter directly without a sled. The manufacture of ovens in various sizes and lengths, suitable for specific needs and purposes, is possible within the framework of the required technical calculations.

... kW Available in metallic and fully ceramic designs Suitable for direct and indirect heating of industrial furnaces Available mantle radiant tubes with diameters from 100 to 300 mm Direct electric ignition Flame monitoring via ionization probe (single-electrode operation) or UV sensor High flame speed Low NOx combustion for natural gas, LPG, coke oven gas, and coke oven blast furnace mixed gas...

...• for storing, preparing, transporting and serving food • stackable • air tight • freezer safe • microwave and oven safe (without lid) • glass bowl heat resistant up to 280° C • ideal for food and meal prepping • silicone ring easy to remove for resi...

...Multicooker for fat-free frying, roasting, baking, toasting, grilling, cooking and steaming, defrosting and heating >> Turbo hot air blower combined with halogen heating technology reduces cooking times and ensures perfect cooking results >> extremely powerful and energy-saving >> 10 l capacity >> temperature adjustable from 0 to 250 °C >> 60-minute timer with automatic shut-off and acoustic...

... ■ Precise choice of weights due to practical containers ■ Simultaneous measurement of up to 3 samples Optional - Hot Set Test complete ■ Sample rack for heat pressure and heat elongation test ■ Laser gauge ■ Thermal heat oven UN55 Size (WxLxH): 585 x 514 x 784 mm (23 x 20.2 x 30.9“) Weight: 57 kg (125.6 lbs) Volumen: 53 l Air exchange rate: 8-20x ■ Thermal heat oven UN110 Size (WxLxH): 745...

... technology segment, Hellmich supplies central vacuum cleaners, dust extraction systems, silo top filters, or an automatic tunnel oven cart cleaning system. For flue gas cleaning, bag filter systems, absorbers, heat exchangers, and systems for heat recovery are produced. The third segment consists of pipelines, chimneys, and apparatus construction. For heat recovery in thermal processes, the company has developed its own low-maintenance, highly robust, and widely proven system.

In addition to the construction and maintenance of ovens and oven systems, Backofenbau GmbH Parchima also offers all services related to oven construction and the craft of oven building. • Assembly, disassembly, and relocation of ovens and systems • Overhaul of small, large, and tunnel thermo-oil ovens • Securing spare parts production through our modern machinery • Modification of air...

... in horizontal or vertical soldering positions – for aluminum heat exchangers / batch furnaces with lifting platform / degreasing/drying/preheating furnaces as additional equipment for the above-mentioned systems. Pre- and post-treatment of heat exchangers through thermal degreasing of parts, fluxes by spraying or dipping, exhaust air cleaning systems. Cu/Ms-HT continuous / chamber furnaces...

...This means that a powder-air mixture is transported through a hose to the gun. There are several corona needles attached, which have a direct voltage between 20 and 100 KV (adjustable). This creates the polarization of the powder. The charged powder cloud wants to discharge its charge and settles on the grounded workpiece. After coating, the parts are passed through a curing oven. Tribo-Electric...

...Stereomicroscope from Motic, microscope stand Dummy Components: TopLine dummy components for process evaluation, certification, training, rework trials, adjustment, testing, and acceptance of assembly machines and AOI systems Practice boards & test kits Packaging (Open QFN) Open QFN packages, air cavities, open QFN housings Rework Services: BGA reballing / laser reballing (service), re...