single measuring Germany

...Ideal for installation in platform scales and integration into machines: With the Single Point Load Cell CB17, you can rely on the proven quality of a leading manufacturer of industrial weighing technology. Suitable for load ranges from 600 g to 3 kg and a platform size of up to 200 mm × 200 mm.

...At a Glance • PS, white • Optionally individually packaged and sterilized • With scraping edge • For single use • Cleanroom manufactured (Cleanroom Class 7) • In accordance with EU food and FDA regulations The measuring and dosing spoons allow for precise measurement and dosing of small amounts of powders, granules, and liquids. Excess medium is scraped off at the top edge of the spoon for...

... volume measuring system VMS 510/520, a robust static scale and a barcode scanner to read code information. All components are integrated in a sturdy mechanism. The system is ready for operation after a few minutes and is approved according to applicable standards. Also for full data recording in ERP systems verified systems are required.

... Panasonic / Serial Mitsubishi. Three versions with different reference point specifications are available. Measuring lengths: 50mm - 100m Accuracy: +/-10µm/m Max. resolution: 0.2µm Output signals: 1Vpp/TTL with PL101 read head (separate) Magnetic division period: 800µm Reference mark: Single/Multi/Distance coded...

...The requirements for the attachments are just as high as for the actual car body. The reflectCONTROL surface inspection system, familiar from car body inspection, has been adapted to the fast and high-resolution surface inspection of largely flat attachments. It recognizes and classifies the defects in an objective and repeatable way. Thanks to the large measuring field, trays can be measured in many cases in just a single capture.

...Infrared Line Scanner Temperature Imaging System – Glass Bending, Glass Forming, Glass Hardening - Systems for Automated Temperature Monitoring in Glass Processes Raytek GS150: specifically designed for glass bending, glass forming, and glass hardening Raytek GS150LE: specially for monitoring and optimizing preheating systems for single-sided coated flat glass The systems are based on the MP150...

...Possibility of overpressure and underpressure - Various possible pressure and flow ranges - Different measurement ranges possible in a single device - Modern operation via a 5" color touch graphic display - Fully remotely controllable, optionally via ProfiNet...

... highest levels of efficiency for diode lasers. Achieve the highest beam quality through the four major features behind the beamPROP: - complete utilization of the aperture by minimized transition zones - minimum aberrations achieved by highest level of precision and uniformity of single lenslets - an exact rotation of the emitter is achieved through the defined center thickness accuracy - minimum pointing errors due to an exact position of front and back surfaces ...

... needed, to be combined, checked and linked. With the available Fieldbus interfaces, you are flexible, perfectly connected and you save time, costs and other resources when linking to and integrating into existing systems. Due to the integrated measuring input, the use of a Fieldbus controller module is sufficient for single-channel applications. For multi-channel applications, the system can be...

...Measuring stick, measurement technology, length measurement, measuring tools, promotional items, surplus stock (new) Condition: new Available quantity: 4,500 pcs Minimum order quantity: 120 pcs (inquiries for lower quantities welcome) Description: - Special edition depicting the entire life of Martin Luther on a timeline - single-sided scaling - perfect as a unique promotional gift - can be...

... Single pieces to series production Birch or beech wood, cross-laminated or solid Clear protective varnish Painting according to RAL Custom interior fittings Screen printing inscriptions, logos, etc. Wooden cases various types of wood available (exotic woods) for example: precision measuring tools, jewelry, and high-quality equipment high-quality fittings Colorless or colored varnishing Custom interior lining Screen printing Batch sizes upon request...

... bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

... of the PD200 e.g. through so-called safety ladders to the corresponding flat roof.The impulse current measuring system easily wins the weight comparison with its previous model. Although the single components partially are pretty heavy (e.g. the transformer), the total weight could be reduced by about 20% (from 11.2 kg to 8.6 kg). On top of the housing there are clearly visible signal lamps - one standard impulse signal (green) and one short-circuit signal (red), incl. integrated tone generator. Detected fluid:water Other characteristics:with visual alarm Applications:for flat roofs...

...The transport platform GEDA 2500 Z/ZP is the new powerhouse from GEDA. Thanks to the innovative GEDA SVARIO-MAST system, the transport platform is guided by a single mast and has a load capacity of 2500 kg. This allows heavy construction materials to be transported effortlessly to their destination at heights of up to 200 m. With a comfortable and spacious platform measuring 1.45 m x 3.55 m...

Founded in 1943 by Oskar Uhl, Walter Uhl Technical Microscopy GmbH & Co. KG has stood for the highest quality and precision in fine mechanics and optical measurement technology for over 80 years. Our company, based in 35614 Asslar, Germany, has developed into a globally leading provider in the industry through continuous development and expansion. We offer a comprehensive range of fine mechanical...

...EGE compact devices for the flow monitoring of gaseous media contain measuring and amplifier in a single housing. They are used where a visualisation of the flow rate on site is required. EGE flow sensors for gaseous media feature two pins which contain the thermal measuring elements. The sensors are set up directly at the device. EGE sensors for gaseous media are characterised by a rapid...

... 120 mm) DryLin® W double rail Guide carriage, assembled Sizes: 10 mm, 16 mm, 20 mm and 25 mm DryLin® W guide carriage, assembled double rail, square Sizes: 06 mm (rail width 30 mm), 10 mm (rail width 40 mm and 74 mm) and 16 mm (rail width 58 mm) drylin® W double rail, square Mono-slide guide carriage Size: 10 mm Mono-Slide guide Single rail and housing bearing - round, adjustable Sizes: 10...

...The ultra-compact solution for mobile data collection. Five analog input channels with up to 80kHz bandwidth. Up to 12 hours of runtime on a single charge. •,2 to 5 analog input channels •,Up to 80kHz bandwidth synchronously sampled across all channels •,16bit resolution with 90+dB signal-to-noise ratio •,12h battery life (AA batteries can be charged via USB or easily replaced) •,Slot for...

...The Rotameter Model E is a high-quality acrylic flow meter. It is a reliable and easy-to-read instrument for measuring and controlling the flow of liquids and gases. It is available in single or multi-tube versions with numerous options. Model E features a control valve and is also available in custom designs. Common applications include water and air purification, protective gas measurements, and other measurements of gases and liquids.

... inspection, surface testing - Significant cost reduction compared to "traditional" testing technology - > 1800 strokes/min, multiple falling - Space-saving, encapsulated single-camera system (< 60 mm space requirement in the direction of travel) - Image processing of the PSS-40 - Use of multiple modules where space allows - Optional multiple cameras per module - Applications in transmitted and reflected light - PLC for controlling the separation station (optional)...

...Automatic measuring machine for gear control with single flank and double flank rolling test methods to determine gear errors.

...We offer a wide range of measuring devices and splicing equipment for fiber optic networks. We have various ODTRs from VeEx for both multi-mode and single-mode, OSA (fiber optic spectrum analyzers), GPON, CWDM, DWDM, fiber optic attenuation testers, and more. We can also provide splicing devices and pigtails, as well as training. The VeEx devices offer very powerful hardware at a great price. VeEx is a major manufacturer from the USA, known for its excellent support.

... ■ Integrated suction on the dosing cluster ■ Different weighing ranges ■ Explosion protection according to Atex The advantages are obvious: simply add the remaining large components to your premixes - in a single additional work step - and of course with barcode support and fully automatically. With our modern storage systems, you can remove large components from several drums simultaneously at any time. Labour and cleaning-intensive pumping from drums into mixing containers is a thing of the past.

...Use: Single built-in sockets for installation in front plates, measuring device housings, etc. Attachment with two screws M 2.5. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick...

...More consultation. More expertise. More than vacuum. Imagine you need to evacuate a volume of 630 cubic meters. This is equivalent to the enclosed space of a single-family home. With this chamber size, facilities are now built where components weighing up to 50 tons and measuring up to 12 · 6 · 5 meters are processed using electron beam welding.

...Master gears are used as reference wheels in single and double flank rolling tests, as well as for rack measuring devices. Master Gears Master gears are used as reference wheels in single and double flank rolling tests, as well as for rack measuring devices. • Cylinder gears, pinions, worms, and worm gears are available • Rolling tests are a quick and cost-effective functional test • The tests...

...With robust peripherals, heavy parts can be easily moved and cut efficiently. On the BEHRINGER semi-automatics, the material is positioned visually, for example, using a linear laser. For longer lengths, we recommend a measuring stop for precise positioning. By using a feeding clamp on a saw, it is possible to automatically cut solid material or tubes. Type: stationary Technology: band Material...

... steel. Compact design (42 mm diameter). IP69K, IP68 protection category. Resistant to salt spray and acids. CANopen interface, SSI, analog. Multi-turn without battery. High shaft loadability of up to 270 N. 16 bit mult-iturn (65536 revolutions). 12 bit single-turn (4096 steps).

... are just a small selection of the systems produced by Friedrich. In close collaboration with our customers, requirements are discussed and solutions are designed. The construction is carried out using the latest CAD technology. In-house manufacturing on modern CNC machines and assembly by experienced staff enable a timely implementation of the design into a high-quality product. From development to delivery, the customer receives everything from a single source. A well-functioning after-sales service ensures a high utilization rate of the machines.

... manufacture precision parts for which a high geometric accuracy is in the foreground, such as air bearing components or micro-milled parts. With an extensive inventory of ultra-precision machines and the corresponding measuring technology, we manufacture with accuracies down to the sub-micrometer range and with roughness up to approx. 1 nm [Ra]. LT Ultra serves both single and series production. We look forward to your inquiry.