sampling systems Germany

... the sampling point is advantageous here. It allows for proper isolation of the process fluid and the venting of system pressure through the venting valve. Although a variety of sampling systems are readily available, there are applications where different materials, sizes, or lengths are required. Our sampling systems are assembled and tested according to your specifications and drawings.

... high-density media and all types of heavily compacted powders and granulates. The All-Layer Drill thus enables representative sampling through all layers, even with highly compressed media. Ideal, for example, for larger containers, mixing vessels, big bags, etc., in the construction, chemical, pharmaceutical, food, and beverage industries. Material: Stainless Steel V4A (1.4404) Total Length: 150 cm Penetration Depth: 1355 mm Number of Openings: 5...

The company HiTec Zang was founded in 1979 by Prof. Dr.-Ing. Werner Zang initially as an engineering office. In the first years, custom hardware developments in analog and digital technology as well as programming work were carried out on behalf of clients. With the emergence of the first operational "home computers", the development of intelligent measurement data acquisition systems began. The c...

... Sight glasses Strainers Check valves Sampling systems Nominal sizes: DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN150 & 1/2", 3/4", 1", 1 1/2", 2", 3", 4" Flange connection: PN10, PN16, ANSI class 150, ANSI class 300, ANSI class 800 Length: DIN, ANSI, Manufacturer standard Housing material: GGG40+PFA, GGG40+FEP, Stainless steel Pressure rating: PN10, PN16, ANSI class 150, ANSI class 300, ANSI class 800 Shut-off element: PFA coated, FEP coated, Ceramic Seat: PTFE Lining: PFA, PTFE, FEP Connection: Flange, Thread...

...Creative and sampling laboratories face a common challenge: cramped spaces with no alternatives, limited room for extensive ingredients, and tight deadlines. Specifically designed for office buildings, these modular and space-saving laboratory systems can automate up to 600 components with the highest precision. Quick presentations of mixtures are now an additional advantage for your company...

... low as 11.7mm (0.46 in.) and as narrow as 57 mm (2.24 in.). Once combined with the Datapaq Insight™ Software, you can display information Temperature range:-150 to 1370°C (-238 to 2498°F) Connectivity:USB or Bluetooth Memory capacity:50,000 data points Start/stop triggers:Manual, Rising/falling temperature Sampling interval:0.05 sec – 10 mins Accuracy:± 0.5 °C (0.9 °F) Resolution:± 0.1°C (0.18 °F) Thermocouple type:Type K Multiple run capability:Up to 10 profile runs before returning to PC Battery:Up to 10 profile runs before returning to PC...

...Interferometric Angle Measurement System, contactless, open design for resolutions of up to 1.5 nrad The BH20 angle measurement system in an open contactless design is based on interferometric signal sampling. It offers extremely high resolutions and repeatability accuracies. Due to the interferometric sampling, an extremely high signal quality is generated with extremely low noise levels. Max...

...The sampling shaft is designed for the standard-compliant collection of representative wastewater samples from the flowing wastewater stream without suction, pumping, or transfer processes. The sampling shaft is part of the separator according to DIN EN 858 / DIN 1999-100. It is used for monitoring, maintenance, and cleaning of the system.

...The profilometer thicknessCONTROL TCP8301.T-Offline is applied for sampling regarding the extrusion process of treads, side wall and inner liner material. The system offers measuring results in high precision and allows therefore an efficient production as well as a fully recorded quality control.

...With Dypipe, we guarantee you a new level of safety and flexibility in your production process for viscous and liquid products. The system can be equipped with various separators, connections, and mounting options that offer unparalleled flexibility, making it the perfect solution for your production line. An innovative sampling system ensures validation of samples during live use. For the high...

...• Temperature range: -100 to 1370 °C • USB and Bluetooth communication • Fast sampling and significant memory • Available in four thicknesses and widths and up to twelve acquisition channels • Replaceable NiMH battery on-site and rechargeable from a port or USB socket to be "always ready" • On/Off control via push button, clock, temperature for greater user control Temperature range: -100...

... fuel from external suppliers are faced with two key analytical requirements before putting it to use: pollutant analysis and calorific analysis. To ensure the proper handling of these analyses, a sophisticated sampling system is required. System criteria: To satisfy these requirements while ensuring optimum process reliability, you need a partner who possesses long-standing expertise and manufacturing proficiency.ERDWICH is that partner. Combining over 30 years of experience and the deployment of our proven single-shaft shredder, we have developed an automated, integrated system that...

... systems and statistical analysis, all usual sensor interfaces, variable fieldbus interfaces, powerful PC software. FEATURES — Complete process control delivered by innovative evaluation elements: windows, thresholds, trapezoids, envelopes, and mathematical operations — High accuracy of 0.05% measurement possible at a sampling frequency of 10 kilohertz — Flexible integration agreements with a range...

...Many materials cannot be measured tactilely, therefore non-contact thickness measurements become necessary. Especially e.g. with glowing materials, or wet processes, a continuous tactile measurement is nearly impossible. Furthermore, web speeds in plant engineering and production have increased, requiring a corresponding fast sampling rate of the measuring systems. In addition, high measuring...

... configured for a dual sensor. The rate sampling mode allows a shuttered sensor to extend sensor life in high rate processes. Rate displays of 0.1Å/s or 0.01Å/s are user selectable. In addition, Frequency or Mass displays can be selected. Four relay outputs allow the SQM-160 to control source or sensor shutters, signal time and thickness setpoints, and signal crystal failure. Digital inputs allow external...

...for liquid / variable area / with glass tube / 0.4-5000 l/h / max. 10bar - The DK46/47/48/800 is a variable area flowmeter (VA) designed for monitoring and adjusting very small flow rates of liquids and gases. Therefore, it is particularly suitable for monitoring sampling flows in analyzer systems and gas chromatographs, or for measuring liquids and gases in laboratories or pilot plants. The...

... on their status, the K2+ vibration controller, continuously developed in-house at IMV, leaves little to be desired. Number of input channels: 2 to 20 (configurable) Number of output channels: 4 Input connection: BNC Input signal: Charge, voltage, IEPE, differential Sampling frequency: 102.4 kHz Input level: maximum 10 V Resolution A/D converter: 32 bit Dynamic range A/D converter: 121 dB Sine excitation type: up to 20 kHz Noise excitation type: up to 20 kHz Shock excitation type: up to 20 kHz Application for multi-shaker (MIMO): BMAC, Multi-Random, Multi-Sine...

... rates up to 500 kHz – orders of magnitude faster than conventional terahertz systems. Bringing together several cutting-edge technologies, the TeraSpeed takes advantage of mature fiber laser technology, powerful photoconductive emitters and fast yet sensitive Schottky receivers.

... • Buffer preparation and media preparation • Production of nutrient media solutions • Polymerization reactions • Human serum processing each with: • Integrated auto-CIP function • Integrated auto-SIP function • Particularly fast cooling capability, e.g., for reaction stoppage, through "idoneus temperature control system". • Optional sterile ports for additions and sampling. • Mobile or stationary design...

...Introduction Single-line LiDAR for medium and low-speed scenarios, with a longer detection range, higher data sampling rate, and higher angular resolution than LakiBeam1. The industrial design is exquisite and compact, making the product small in size, light in weight, and high in performance. It supports ultra-high frequency sampling and optional angular resolution, achieving zero blind spot...

...The GAS TESTER is our lowestprice entrylevel model for monitoring gas concentration. Naturally we have installed our proven analysis technology in this product as well. Features reliable concentration measurements compact and handy design easy operability argon and krypton use optional data storage Only a small quantity of gas is required. Sampling is executed with a special gas supply pump. The...

...The data logger measures and stores up to 32,000 temperature readings, with individual sampling intervals ranging from 1 second to 12 hours, from a thermocouple type J, K, or T, which is directly connected to the socket of the data logger.

...Ensuring Operational Quality Assurance Goods Receipt Inspections and Supplier Evaluation Manufacturing Accompanying Inspections Goods Dispatch Inspections Sampling and Laboratory Tests...

... •Synchronization of multi-channel systems via master/slave option •PCI Express (PCIe) x8 Gen-3 card with full height and 3/4 length •Compatible with GageScope software •SDKs (Software Development Kits) for LabVIEW, MATLAB, and C/C# •Windows 8, Windows 7 (32/64Bit), and Linux support The new extremely fast, high-resolution Gage digitizers of the EON Express CompuScope series offer sampling rates of up to 2 x 3 GS/s on a single-slot PCI Express card and are available with various on-board memory depths from 2 GS to 8 GS.

...Sampling of injection molding tools. Custom molds and workpiece carriers for fully automated overmolding systems.

...BlowerDoor measurement systems are universally applicable: Our highly portable measurement system, BlowerDoor MiniFan, with a measurement range from 5 to 2,300 m³/h, is perfect for use in small buildings, highly airtight structures, and for sampling multi-family buildings.

... status feedback: Temperature | Battery | Charge voltage & current | Signal Integrated sensors: Temperature | Humidity | Air pressure | Dew point Connections 1: Power supply 7 V to 12 V Connections 2 - multiple options: Anemometer & Rain gauge, Modbus RTU Master, Noise, Modbus RTU-Slave, Ethernet Sampling frequency: 3Hz gases, 1Hz particles Integration time: 10 seconds to a maximum of 24 hours...

...for applications in intake air flow measurement The calibration unit CVS-KAL has been developed in accordance with the requirements of the EPA (Environmental Protection Agency) for the precise calibration of critical nozzles or Roots blowers used for Constant Volume Sampling in exhaust analysis during engine and vehicle testing in CVS systems at exhaust measurement centers in the automotive...

...Series-related inspection and functional checks are part of the standard quality management program of the corporate group. To carry out these inspections, our quality managers rely on extensive equipment. Below are our sampling and series-related testing options: - CAQ system with interface to ERP and BDE systems - 3D CNC-controlled coordinate measuring machine - GOM (Society for Optical...

...Tailored to individual customer needs, we deliver complex and high-quality products from the field of foam and plastic processing for medical and safety technology. In the area of foam and plastic processing, we manufacture custom products for medical technology (small and large series, prototyping, collaboration on project development, sampling). We also supply complex components (partially integrated with metal) made of plastic and silicone for systems in medical and safety technology.