rubber and plastic Germany

...Release agents for plastic and rubber processing...

...We collaborate with you to create custom injection-molded plastic parts. Our product range includes everything from micro precision parts to functional housings and complex multi-component injection-molded parts (2K / 3K processes, insert and outsert technology). Material: PC, ABS, PC/ABS, PA6, PP, PEEK, PBT, PS, PPE, PEI. Surface technology: Printing, labeling, painting, coating.

...Die-cut parts made from cellular rubber for use in the automotive industry. Cellular rubber is a closed-cell elastomer without an outer skin. Unlike foam rubber, it can also be used as a seal without a skin due to its cell structure. It is characterized by high elasticity, aging resistance, and excellent density properties. Cost-effective and precisely die-cut, available in smaller series or, for special requirements, alternatively water jet cut. Also available as sheet material. At the customer's request, it can be equipped with self-adhesive backing on one or both sides for easier installation.

...Cellular rubber made by KÖPP is the ideal material for sealing, insulating, damping, and as a rattling protection.

...In the production of rubber grommets and rubber seals, we use tools with special coatings and tooling concepts that prevent the adhesion of rubber parts (including TPE, EPDM). With this protocol, we guarantee safe mass production.

...• For automized applications • CO2 consumption is controlled by pressure and temperature • Compact design, overall length 134 mm (5.3") • Customer-specific robot adapter • Weight without robot adapter 3.9 kg (8.7 lb) • No water condensation due to high efficient thermal insulation • Process reliable and maintenance-free in permanent operation • Cleaning width 200 mm (7.8")...

...Pipe bracket with rubber inlay...

...Custom workplace mats can be manufactured in various materials and can also accommodate relatively complex shapes. A simple sketch with the desired dimensions is sufficient, and we will create a personalized quote for you.

...Rollers made of EPDM: EPDM is a rubber that has similar properties to NBR, but with lower wear and break resistance. Additionally, EPDM has a higher chemical resistance. In the roller sector, EPDM is used when the following issues arise: heat, chemicals, hot water, steam, and weathering. Rollers made of NBR (Perbunan): Nitrile rubber is a copolymer product made from acrylonitrile and butadiene. It is stable against oils, fats, and gasoline. Therefore, it is particularly used in mechanical engineering.

...Impression lid 163mm, plain, without rubber seal Not suitable for liquid filling goods. Article number: 034550163000...

...Hose connections, adapters, and sleeves The various connections, adapters, and sleeves are suitable for connecting to plastic and rubber hoses. The working pressure and temperature range are higher than those of the corresponding connecting hose. The connections are available in stainless steel and brass materials. The hose nipple ensures a secure hold inside the hose. All hose connections are compatible with our screw fitting program.

... storage, user management, logging/documentation/tracing, and barcode scanner/ID key (optional). Alternatively, the E30 is also available in a change basket version, making it compatible with our washing system W30. It is ideally suited for a linear follow-up processing line → production → deburring → washing → tempering, as the batch change baskets can be used compatibly with the respective machines. For Industry 4.0 requirements: As standard, monitoring of process data over the network is possible from an external workstation or optionally via OPC-UA server.

...Edge protection profiles - PVC edge protection profile with sealing profile - Rubber and plastic profiles...

...Die-cutting in sheet and roll formats can be performed at J. Schwarz GmbH on three different types of machines. This allows for the production of stickers, films, stencils, insulations, and seals, for example. The variety of materials is very high: cardboard and composite materials, rubber, silicone, and plastics are used depending on the requirements for die-cutting.

...We offer ethylenepropylenedienerubber (epdm) In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

...A plastic part can only be as good as the tool in which it is produced. Erlemann+Huckenbeck therefore manufactures pressing tools as well as injection molding tools in-house. This is for the production of our standard operating parts – or directly on behalf of the customer.

...Rubber Plastic Seals, turned, plotted, punched, laser-cut Our versatile services include, among other things, flat seals. FA qualities (also from other manufacturers), mixed qualities, graphite seals, heat flat seals, PTFE/Multitex, PTFE virgin glass and multitext, Gylon in all colors and alternatives. Metallic seals, rubber-steel, comb profile seals, shaft seals coated with PTFE or spiral-wound.

...Rubber-Plastic Connection - Tripod Foot...

...Öztug's manufacturing depth starts with plastic injection molded parts (with and without metal + 2K), rubber molded parts (with and without metal), and ends with wire bending parts with in-house tool making (according to customer specifications).

...Components made from rubber-plastic compounds combine the positive properties of various materials into a single component. In this context, we particularly focus on chemically-physical direct bonds between thermoplastics and elastomers, as well as TPEs (thermoplastic elastomers). This allows us to integrate additional functions into components and provide our customers with added value. On one...

...Plastic injection molded parts from all common plastics, prototypes and rapid prototype parts, plastic parts with inserts, plastic parts with paintwork, with chrome plating, with decorative lamination also in leather, rubber parts, rubber-metal connecting parts, parts made of carbon, visible carbon.

... feed rates with low noise levels. Even delicate tasks, such as creating the thinnest webs and ribs, can be accomplished with minimal milling pressure. The tools are dynamically balanced in two planes, ensuring high operational smoothness and low vibration, which is reflected in perfectly clean surfaces. Additionally, the milling heads are interchangeable, providing high flexibility and quick replacement in case of wear. The interchangeable heads are available in ball, straight, radius, or 45-degree configurations.

...Ink rolls are used as ink storage or reservoirs in high-speed impact printing systems for expiration date marking. In these printing systems, the ink is usually transferred evenly from the ink roll to the steel types or directly onto a rubber cliché printing roller using a rubber transfer roller. Our plastic ink rolls are based on the open-pore special plastic Nylasint® 64HV. These ink rolls...

...The correct choice of tool size guarantees cost-effective production. Injection machines with an injection volume of up to 2.5 liters allow for the production of large-volume molded parts (also as rubber-metal components with conventional steel qualities and stainless steel). We process the following rubber qualities: - Natural Rubber (NR) - Styrene-Butadiene Rubber (SBR) - Chloroprene Rubber (Neoprene) (CR) - Nitrile Rubber (NBR) - Fluoro Rubber (Viton) (FKM) - Silicone (SI) Due to our many years of experience, we are happy to provide you with advice. Request our technical support.

...Rubber and plastic sheets are characterized by high product quality and safety standards, along with reliable delivery service for you.

...Roll-up entrance mat with wide rubber inserts and an overall height of approximately 27 mm. Due to the rounded profile of the mats, it can be used at heights ranging from 22 mm to 27 mm. The underside of the mats is made of rubber strips, ensuring proper ventilation of the mat. The mats are easy to clean, trap dirt effectively, and have a very high cleaning effect. Thanks to the rounded profile, shoes grip the rubber inserts better than with flat profiles, thus picking up stones and coarse dirt more effectively.

...Supplementary processing (e.g., washing, drying, etc.), taking over customer productions in case of failure of our own deburring systems (emergency guarantee), product and process developments. The service offering from ECO Deburring Center encompasses the complete spectrum of cryogenic deburring technology, ranging from consulting and process development to sample deburring and the processing of plastic, non-ferrous metal, and rubber parts in the form of contract deburring.

...Support rollers / return rollers, rubber-coated and non-rubber-coated, airtight welded with a lid. Our plastic return rollers are available in the variants – non-rubber-coated, 3 rings, fully rubber-coated – each in different dimensions. Feel free to check our TKH delivery program or call us for more information.

...With water jet technology, seals made from foam materials or compact elastomers can be manufactured according to specifications. We also offer this technology in 3D. With water jet cutting, we provide quick production of individual parts to series from sheet material without the need for tooling. Our stock program includes a wide range of sheet materials made from rubber, plastic, and foams with...

...Seals are as diverse as their applications. To assist you in the best possible way, feel free to consult our specialists. We will find the right solution. Where rubber or plastic seals reach their limits due to thermal stress, composite materials are used for these applications, which can now be manufactured for you from asbestos-free materials such as glass, ceramics, etc.