pumps for acids Germany

... possibilities. The Bürkle drum pumps AccuOne and EnergyOne with a unique hybrid system enable fast, flexible, and comfortable filling, whenever and wherever you desire. The pumps are equipped with two different power supply systems: AccuOne, powered by a high-performance battery, or EnergyOne, with a power cable for direct connection to the mains. The innovative aspect: The power units are interchangeable!

... approximately 12 x 200-liter containers Features & Benefits * BLDC motor with high efficiency of up to 70% * Continuously adjustable * Long battery life * Automatic shut-off in case of overload * Sophisticated quick-release mechanism * The value of the maximum delivery rate is determined based on fixed parameters and under the same conditions. Please refer to our website for more information.

... cleaning or disposal costs for problematic media. The pump is available in stainless steel, polypropylene, and Hastelloy C. In stainless steel and Hastelloy C, the F/FP 425 can also be used in explosive environments. Advantages: - Optimal residual emptying with, for example, less than 0.05 liters of residual volume in a 200-liter drum - No "topping up" required to completely empty the drum...

...Especially suitable for the promotion of: drinking water, well water, rainwater, light oils, heating oil and diesel fuel, cooling emulsions and dielectrics, light acids and bases. NOT SUITABLE FOR GASOLINE! Set consisting of: Submersible pump COMET_IN (break-resistant, shock-proof design; 4 m cable, coarse filter and fine fiber filter) 4 m PVC fabric hose Transformer rectifier 230 V~ / 12 V= or 24 V= with on/off switch Hose clamp Pack of 5 fine fiber filters CE compliant...

...All information at a glance: "Hand Pump JP-04 Yellow for Acids" Flow rate: approx. 0.3 l/stroke Pump material: Polypropylene Shaft: Polypropylene Seals: FKM Hose connection: ¾" Submersible tube length: 500 - 900 mm Submersible tube diameter: max. 34 mm Thread adapter: G 2" Further links to "Hand Pump JP-04 Yellow for Acids" Questions about the item?

... application range from contaminated to heavily contaminated media, aqueous to oily emulsions (both synthetic and mineral oil-based), and media with low to increased solid content. They are also used for the transport of various industrial liquids, such as low-viscosity cooling and cutting oils, (deionized) water, as well as alkalis and acids. For air-contaminated media, versions with a suction design are available. The major advantages of these pumps are their low maintenance requirements, high operational reliability, and the wide range of available immersion depths.

...Heated precision dosing pump in PTFE design, featuring forced-controlled valve technology and a variable, low-pulsation discharge process for hot, highly aggressive fluids, acids, melts, or gases.

...With discharge hose and tap For the transfer of acids, alkalis, and cleaners • Delivery rate / lift 230 / 300 ml Available for 2 immersion depths: • 650 and 1000 mm Displayed photo: front: with discharge elbow - back: with discharge hose and tap Article number: B69-6712-A/B69-6713-A Delivery: free of charge...

... applications, we can offer you the most suitable filter fleece. To select the filter fleece, we need the following information: - Medium (alkalis, acids, emulsions, oils, etc.) - Type of solid (e.g., processed material, sludges, etc.) - Amount of solid per time unit - Amount of liquid - Information about the filter used (type, year of manufacture, machine number, etc.) - Method of sludge inflow (e.g., flocculation, machining, grinding, etc.)...

... solutions, acids, and bases. Povinal™ hose is excellently suited for aliphatic, aromatic, and chlorinated solvents. Prothane™ is a transparent polyester polyurethane that stands out for its excellent abrasion resistance and has good properties at low temperatures. Vytex™ is a clear, flexible polyvinyl hose that is ideal for universal applications such as food, beverages, and including diluted aqueous solutions.

...TEFLON / PTFE SEAL for Chemicals. The rotary piston pumps are equipped with a VARI - LIP - SEAL made of PTFE with stainless steel or carbon. This seal can be used for abrasive, highly viscous media, but can also take advantage of the sliding properties provided by PTFE to pump thin liquids such as acids and alkalis, even allowing for dry running up to 10 m/s. PTFE does not age and can be used...

...ANSIMAG magnetic coupling pumps operate with a minimal number of media-contacting parts, significantly reducing spare parts inventory and maintenance efforts. The split casing is reinforced with Kevlar fibers, ensuring high reliability and long service life. The ANSIMAG KI magnetic coupling pumps are fully lined with ETFE and offer excellent resistance to highly corrosive liquids. Typical applications include the transfer of acids and bases in specialty chemicals and the steel industry.

... useful application data: max. temperature: +180 °C Main application Valves Gate valves Flanges Agitators Centrifugal pumps Lids Suitable for Cold and hot water Alkaline solutions Acids Oils Grease Bitumen Asphalt Crystalline and abrasive media Food industry Variant S 50 Propaflon White made out of pure PTFE...

...coolants, saltwater, as well as weak alkalis and acids. Profile: ELRING CURIL T Base: Synthetic resin Character: Cured, permanently plastic Color: Green Viscosity: Paste-like / approx. 30000 mPa*s Maximum sealing gap: 0.1 mm Processing time: 5-10 minutes Electrical conductivity: Insulating Operating temperature: -40 °C to +250 °C (short-term up to...

...Pumps for the transport of acids (chemicals) made from stainless steel casting and ready for installation, CNC machined.

...Contact insecticide with broad approval for vegetables, fruits, and ornamental plants against biting and sucking insects based on potassium salts of natural fatty acids.

... centrifugal pumps MAGSON, the filter series SONCO, or the new pump set SAFETEC for emptying IBCs distinguish us. Another focus is on filling systems, dosing controls, and flow meters. Together with our parent company FLUX GERÄTE GmbH, we are stronger than ever. Our network of consultants is denser, and our solutions are more comprehensive. SONDERMANN products offer the highest safety at the lowest life-cycle costs. In addition to excellent product quality, customers appreciate our flexibility and customer orientation - see for yourself.

...The company SCHMITT-Centrifugal Pumps has been one of the leading manufacturers of specialized industrial pumps for the transport of aggressive and pure media since its founding in 1964, with a performance range of flow rates up to 580 l/min [35 m³/h] and delivery heights up to 40 m. Quality, flexibility, and service competence are principles that have been fundamental to our work for 50 years.

... automatic application of AK coatings, which are used, among other things, for sound insulation in the automotive sector. We are a system provider and select the optimal dosing and application technology for your product. Starting with the gentle transport of the medium, we offer various options to convey your medium using transfer pumps, grease containers, cartridge systems, or pressure vessels (for...

...and thread adapters. Pneumatically operated diaphragm pumps, vertical and horizontal centrifugal pumps, magnetic centrifugal pumps, as well as an extensive range of accessories complete the product portfolio. Thanks to long-serving employees and the company owners, the company can look back on decades of extensive experience in the pump sector. Although JESSBERGER has only existed as a brand...

The core products of Finish Thompson GmbH are magnetically coupled centrifugal pumps made of plastic, drum pumps, and motors, as well as spare parts for pneumatic diaphragm pumps.

Manufacturing and delivery of self-priming and standard centrifugal pumps made from various plastics for the transport of water, wastewater, acids and alkalis, brine, and liquid fertilizers.