plastic metallization Germany

QUALITY MADE IN GERMANY – FOR COATING SYSTEMS WORLDWIDE Since 1925, Sprimag has been developing systems for functional and decorative coating of series parts and for the internal coating of metal packaging. At its current headquarters in Kirchheim-Teck, Sprimag employs around 180 staff and has branches in the USA and Mexico. As one of the few providers in the market, Sprimag also develops its own...

... treatment. In a chemical bath, copper particles can then be deposited specifically only on the activated surfaces. Other metals, e.g. nickel, tin or gold, can then be deposited onto the starting layer of copper. In this way, a selectively coated plastic part is obtained. MID technology thereby makes it possible to selectively coat two-dimensional and also three-dimensional plastic parts and use them, for example, as circuit carriers for electronic or mechatronic assemblies. With the LPKF-LDS process...

...Seal plates made from pure plastic combine excellent product protection with optimal recyclability. Advantages: - Reliable water vapor and oxygen barrier with minimal resource use - Additional barrier through metallization (without compromising recyclability) - Sealing against PET or PP - Can be fed separately or together with the container into the respective recycling stream - Good...

... and technical thermoplastics are used in various industries, including mechanical engineering, lighting, and sanitary applications. Additionally, we offer decorative plastic metallization through vacuum coating. We can apply layers of copper, aluminum, tin, gold, or silver with various metallic effects such as stainless steel, aluminum, antique brass, or gold effects; even colored top coatings are possible.

...Chromoptic for Plastic Parts. We coat plastic parts with a highly decorative metallic appearance. The method used is a combination of painting and vacuum metal deposition. The appearance is very similar to that of galvanic chrome plating.

...Food-safe | Anti-block additive | Custom metallization | All EU certifications • Transparent: Transparent, Blue tint I, Blue tint II • Gold metallized: 9 different gold variants available • Colored: Black, Gray, Brown; other colors available upon request Film thicknesses: 150µ - 900µ...

... contribute to the self-inductance of the capacitor. Based on decades of experience in metallizing capacitor films, ELECTRONICON has developed a series of high-voltage capacitors using self-healing technology with special metallization types. Despite the high voltage ratings, the E51 series is manufactured using dry technology and without complex connections. The capacitor element inside the cup made of self-extinguishing plastic is encapsulated in PUR resin.

... with "stainless steel." The coating is highly weather-resistant and very abrasion and impact-resistant. Applications: For color-matching enhancement of stainless steel parts and for coating or visually upgrading other parts with a stainless steel effect (surface metallization). Provides long-term protection for pipelines, machinery, silos, turbines, etc. For surface enhancement after welding. Suitable as a spot welding paint.

... Products: Audio module components, DC/DC converters for the automotive sector, charging converters, sine wave inverters, PLC controls, special devices. Plastic Parts: Knobs and caps for electronics, automotive, and white goods manufacturers, NEW in 1 and 2k technology including laser marking, soft-touch coating, and metallization. Import Parts: Wholesale of sockets, plugs, etc. for the consumer goods industry.

...tool, and device development, plastic injection molding (1- and 2-component), engineering consulting, and comprehensive service for pre-series tools. Additionally, we provide mechanical processing of plastic parts according to customer specifications, assembly of components, and manufacturing of complete devices, pad/screen printing, gluing, ultrasonic and thermal welding, EMC solutions in...

CREAVAC-Creative Vacuum Coating GmbH is the specialist for coatings, vacuum systems, vacuum metallization, and plastic coatings. CREAVAC-Creative also offers vacuum components such as corner valves and evaporation systems with ceramic evaporators. CREAVAC products are used in a variety of industries, including: -Automotive industry -Medical technology -Microelectronics -Packaging industry...

...or plastic. Our company was founded in 1984 as Entlackungsgesellschaft mbH. As an engineering company, our services include stripping, coating removal, and cleaning work for the materials metal, plastic, and wood. We currently employ ten staff members. All our services are characterized by modern processes for which we apply a quality management system. Our company is certified according to ISO 9001:2015 by TÜV SÜD Management Service GmbH and can be downloaded. The business headquarters and production facility are located in Walldorf near Heidelberg.

Plastic coating, metallization of plastics, vacuum coating, high vacuum refinement, electromagnetic shielding...

GfO Gesellschaft für Oberflächentechnik AG is the specialist for technical and optical refinement of surfaces. GfO coats plastic molded parts with metals, oxides, and transparent lacquers for the sectors of communication, automation, automotive engineering, medical technology, and building technology.

... customer's on-site appointment. The service offering from ECO Entgratungscenter encompasses the complete spectrum of cryogenic deburring technology, from consulting and process development to free sample deburring and processing of plastic, non-ferrous metal, and rubber parts in the form of contract deburring. Due to daily worldwide supplies of various materials, we can today process even the most...

... systems and a water wall. There is also a drying oven with space for 18 EP positions and a maximum temperature of 60 °C. • Wet paint coatings in pearl and grain structures using the hand spray method, metallization (conductive paint for shielding), and series processing of high gloss are possible with us. • All types of surface preparation such as sandblasting, deburring, filling, grinding, priming, flaming, etc.

...Our current expertise is based on over 25 years of intensive work with the material plastic and the commitment of our approximately 500 employees. INOTECH operates as a successful system supplier for renowned clients in the fields of plastic technology and Health & Beauty. Our products are utilized in the automotive, telecommunications, mechanical engineering, medical technology, and packaging industries. With top-notch technologies, compelling innovations, and targeted investments, we ensure our customers a clear competitive advantage.

Manufacturing of drawing-bound plastic parts from 0.5 g to 1200 g on 28 ENGEL injection molding machines with a clamping force of 250 kN to 4200 kN, including associated mold construction. Production of hybrid assemblies using technological special equipment or automation technology, including testing technology. Metallization of plastic parts through vacuum deposition (PVD).

High-tech injection molded parts and assemblies; overmolding technology; 2K technology; tool, automation, and fixture construction; finishing of plastic parts using the following technologies: laser marking; metallization; printing; ultrasonic welding; radiation crosslinking.

Refining not only increases the durability of workpieces but also enhances their attractiveness. It thus represents improved resilience and aesthetics. There is a distinction between decorative and functional surface finishing for both indoor and outdoor applications, as well as enhancements to surface and corrosion properties. Corresponding internal grinding processes and polishing to any roughne...

Hair accessories, fashion jewelry, pearls, stones, shopping cart accessories, plastic injection molded parts with metal inserts, pad printing, digital printing, vacuum metallization, Cwave, contract manufacturing, tool making, all produced in-house. Made in Germany. Our product range embodies the experience of 4 generations. Our motto is flexibility, performance, and the highest quality, which we can guarantee thanks to our modern machinery and our qualified staff. We design your product, create the necessary tools, and of course, build the prototype for you.

... million single and multi-component parts produced annually, the company ranks among the leading international providers of plastic metallization. In addition to daily production, SAXONIA Galvanik has also established itself as a development partner for various companies and significantly influences the state of the art in the field of interior surfaces. Through our close cooperation with...

... prepared papers starting from 40 g/m². The metallization is designed for web widths of up to 1,650 and 2,450 mm. We convert the coated material on two precision roll cutters with cutting widths from 300 to a maximum of 2,450 mm. Quality Management DIN EN ISO 9001:2008...

Industrial coatings, coatings and markings for large vehicles, sandblasting work, blasting work in roller conveyor blasting systems, special coatings.

Coating services, coating systems, coating materials, turbine components...

Function, durability & appearance are the decisive arguments for powder coating. Our motto: Quality and reliability. We coat everything from very small to very large.

Expert in 3D flocking. Surface finishing flocking is used for sound insulation, thermal insulation, surface protection, preventing condensation, decoration, etc.

Surface finishing. HVOF. Flame spraying. Powder flame spraying. MIG-MAG. TIG. PTA welding. Turning, milling, drilling, grinding, lapping, honing, sleeve drilling.

Anodizing; Hard Anodizing; Chemical Nickel Plating; Hard Anodizing, Sliding Coatings, Painting, Plastic Metallization, Corrosion Protection, Wear Protection, Process Chemicals for Surface Technology...