water Germany

...Sapphire, ruby, and diamond nozzles for pure or abrasive water jet cutting...

...In almost every large industrial hall, there are supply air systems that bring cool air into the halls to make the climate bearable. In this area, IMH has been active for 20 years and has included cooling water piping in almost every piping project for a paint shop. These pipes extend from Germany across Europe to Asia, where IMH has successfully completed many projects to the satisfaction of...

...Water supply, drain and overflow for on site mounting.Incl. automatic water level control. Basin suitable for GN1/1-200. Basin completely and indirectly heated, heater underneath basin bottom. Thermostat loosely attached with built-in casing. Basin rim folded all around 15 mm or for flush fitting.

...PROCESS DATA COLLECTION AND PROCESS CONTROL AT THE HIGHEST LEVEL AND NEARLY MAINTENANCE-FREE In response to user demands for maintenance-friendly and low-failure susceptibility in slightly contaminated water, the proflow mechanical is now available as a replacement for the previously common standard measurement variant using a paddle wheel or turbine. This mechanical measurement based on the...

...rinsing and draining. Temperature range::-40 °C to +100 °C Standard length::40 m Colour::6 red axially applied stripes on black cover Cover::EPDM, ozone and UV-resistant Reinforcement::Synthetic fibres Lining::EPDM, black, non-porous, smooth Marking::Black PHOENIX TRIX-ROTSTRAHL DN [..] Wasser/Water 20 BAR Betriebsdruck 60 BAR Berstdruck Made in Ger...

...Density Measurement in Concrete Residual Water Density measurement in concrete residual water In Germany, approximately 40 million m³ of ready-mixed concrete is produced each year. About 2 to 3% of this is typically unusable. This residual concrete mass comes from concrete that was not accepted by the customer or from concrete that adheres to the inner walls of the drum containers of delivery...

...-free, based on a water solution. After drying, they form a long-lasting protective layer. This layer mechanically destroys germs (bacteria, fungi, yeasts, and viruses) while not damaging the skin. Therefore, germs cannot develop resistance. Both the efficacy and safety of the products have been extensively tested, and the results - even against problematic, resistant germs - are impressive and can be...

...For production in the steel, foundry and glass industries. Temperature resistant from -30 ° C to + 120 ° C. Highly flexible, hot water resistant version. Construction: Abrasion-resistant tube Tension and pressure-resistant fabric inlays Abrasion-resistant, self-extinguishing cover Interior and exterior smooth, fabric patterned optional with heat protection levy of fiberglass (up to + 240 °C) or silicate (up to + 800 °C) Dielectric strength> 6 KV electrically non-conducting R> 109 Ohm Supplied by the roll or cut to length. Also available as spiral hose. Other versions and dimensions on request.

...HIAT develops and produces catalyst-coated membranes (CCMs) for use in PEM water electrolyzers, utilizing commercially available electrocatalysts and membranes. The institute has extensive experience in the composition and structure of electrolysis electrodes, carriers (gas diffusion layers), and membranes. Furthermore, HIAT has patented a novel platinum-free cathode for PEM water electrolysis...

... requires a multitude of application options for agitators. In anaerobic and anoxic tanks for nitrogen removal, slow-running agitators are used to suspend and homogenize activated sludge flocs. In aeration tanks, mixer/aerators can be used for efficient oxygenation and mixing. Where waste water is purified, sludge is generated. This sludge is generally conditioned using polymers, dewatered, and then digested in anaerobic sludge digesters to generate biogas. Special agitators are required for both polymer introduction and for digested sludge mixing.

...However, the contaminated, unusable wash water cannot simply be discharged into the sewage system; it must be collected and transported away by specialized disposal companies. To treat contaminated wash water, Kunststofftechnik Weißbach GmbH, in collaboration with other companies, developed an innovative solution approach in a facility using electrolysis. The OH radicals generated during the electrolysis process destroy the hydrocarbon groups of the drilling emulsion as well as other organic...

...Application Areas at the Customer Installation in osmosis systems, cooling towers, ultrapure water treatment, irrigation systems, greenhouses, wastewater treatment Features of Our Valves High flow capacity Suitable for contaminated media Low closing stroke Free of non-ferrous metals...

... for drinking water disinfection with medium-pressure lamps. The sensors are inserted into a pressurized water-tight measuring window tube, which enables simple and reproducible replacement of the sensors. With an aperture angle of 160°, our sensors are suitable for precise radiometric measurement of UVC irradiance in UV water disinfection systems. We offer these with reference radiometer RMD...

...The system comprises two electrodes which are installed above the floor of the pumping station shaft and which issue an alarm message via the connected level relay when they come into contact with water. A sudden water leak in the shaft is detected immediately thus effectively preventing damage. Product features Level relay with connection terminals for potential-free messages for installation in the AWAcontrol control cabinet ...

...Hot water systems designed according to individual customer or process needs, up to 200°C in a performance range from 100 kW to 25,000 kW. Designed according to DIN 4752, additionally equipped with flow monitoring in each line for maximum safety and instant indication of the heater flow at a glance. For gaseous fuels such as natural gas, propane, butane, hydrogen, or residues, or liquid fuels such as light heating oil (diesel), Schwechat, mazut, heavy heating oil (HFO) up to Negylengyel.

...Aqua-non AGOFORM's water-proof mats offer the ideal protection against leaks and liquids running out in the sink area. The special semi-spherical shape on the surface allows up to 6 litres of liquid per sq.m to be collected. Removing and cleaning the mat is quick and easy thanks to the special design. The product is available in standard cut sizes of 2000 x 580 mm as well as in special cut sizes for any required format (corner solutions, centre posts) for any carcase dimensions.

...Pressure regulator of the compact series for water Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Pressure range up to 15 bar...

AWK Verschlüsse GmbH & Co KG pursues a corporate policy based on three fundamental pillars: quality, flexibility, and service. Environmental responsibility is always a priority. Our dedicated team produces around 1.3 billion closures per year in two shifts. The history of AWK Verschlüsse GmbH & Co KG dates back to 1989, and production began in November 1990 with five production lines. In 1997, we...

Innovative technology that protects pipes and benefits the environment For over 30 years, the name Mommertz and Neutrakon® Neutralisation has stood for the highest product quality and innovative solutions for the heating industry. As a family-owned company, we offer our customers safe and tailored neutralisation solutions. Almost all renowned heating manufacturers count among our partners and cus...

For over 210 years, the company RUEZ in Bad Schussenried has been engaged in metal and sheet processing for various industries. From the tin shop founded in 1804, a powerful and innovative medium-sized family business has developed over generations. We combine innovation with quality and flexibility. THE OPTIMAL SOLUTION For decades, we have experience in manufacturing over 21,000 conveyor and ...

Stottrop-Textil GmbH & Co. KG is a leading provider of high-quality technical textiles for various industries. With decades of experience, we offer tailored solutions for demanding projects. Our portfolio includes fabrics for textile construction, membranes, fiberglass fabrics, and high-temperature materials according to A2 4102 and EN 13501 B1. Additionally, we provide innovative products such as...

Maleki GmbH was founded in 2007 in Osnabrück as a developer and manufacturer of exceptional and environmentally conscious dry mortar systems for the areas of civil engineering, underground construction, agriculture, landscaping, and acid construction. As a steadily growing and emerging company, we aim to offer our customers an environmentally friendly and more efficient alternative to conventiona...

OVE specializes in the activation of plastic parts, as well as the coating and treatment of surfaces of industrially used elastomers, molded parts, and O-rings. Our expertise in reducing friction and wear of elastic components aims at a functional, economical, and ecological optimization of dynamically stressed seals according to the individual specifications of our customers. Modern plasma tech...

With over fifty years of experience in plastic processing, we produce our Hel-x Füllkörper for biological wastewater and gas treatment, as well as for use in aquaculture. You can rely on this rich experience as a foundation for high-quality Hel-x Füllkörper made of plastic! The production is carried out according to our own developed process, strictly adhering to high quality and environmental s...

...Grape Seed Extract >75% OPC, >85% Polyphenols produced by water extraction, 100% water-soluble - suitable for beverage production. Sustainable production, made in Europe.

...Discover our diverse selection of bath bombs in a vibrant array of colors and shapes. Each bomb is a little treasure, enriched with the finest oils and nourishing ingredients to pamper your senses and care for your skin. Simply dissolve in warm water and enjoy the fragrance that fills the room. Relax and leave the everyday behind.

...The trak | uplift save battery is a lead-acid traction battery optimized for use in dusty and harsh environments. It has a robust battery trough with cover, which protects the battery from contamination and violent damage. The water refill system trak | aquafill and the electrolyte level indicator trak | aquacheck, which are fitted as standard, can significantly reduce water refill intervals and...

...calibratable, electromechanical single-chamber weighing scale for up to four different admixtures with automatic water flushing mounted in splash-water and dust protected casing Optional:Measuring amplifier...

...Dr. Paul Lohmann® offers magnesium gluconate as a powder, fine powder in food/pharma quality, and for dietary supplements. In the pharmaceutical sector, it is used for the treatment of hypomagnesemia. In the food sector, it is used for magnesium fortification. CAS 3632-91-5 (free of water) EINECS 222-848-2 Dr. Paul Lohmann® conducts product and application development in close collaboration with customers. This includes the adjustment of chemical and physical parameters such as bulk density, wettability, particle size, purity, or pH value.

...ELKALUB GLS 135/N1 is a lithium-soap-based, water-resistant, and corrosion-protective specialty grease of high performance. It can be used in rolling and sliding bearings within a temperature range of -20 °C to +120 °C. The short-fibered and homogeneous grease is excellent for lubricating linear guides as well as ball bearings up to a speed rating of 500,000. ELKALUB GLS 135/N1 exhibits very low bleeding tendencies, making it well-suited for central lubrication systems (pumping tests conducted with bielomatik and Lincoln).