permanent magnets Germany

...Neodymium Magnets (NdFeB) Samarium Magnets (SmCo) Plastic Bonded Magnets AlNiCo Magnets We ensure the contract manufacturing of all currently produced types of permanent magnets. We focus on demanding industrial applications with medium to large volumes. The experienced team of technicians manages the quality assurance system throughout the most challenging projects. We supply the following permanent magnets: Neodymium Magnets (NdFeB) Samarium Magnets (SmCo) Plastic Bonded Magnets Ferrite AlNiCo Magnets...

...Permanent magnets are indispensable for modern technology. The number of applications is growing with the development of technology. Various Permanent Magnet Materials Permanent magnets are indispensable for modern technology. The number of applications is growing with the development of technology. The permanent magnetic products shown here are just a part of our product range. We offer a variety of dimensions: Custom quotes available upon request. Group Materials: Group 3 Metallic Materials Detail Materials: SmCo Magnet Materials...

...As high-energy magnets, permanent magnets made from "rare" earths are referred to. These materials are characterized by their high energy product of over 300 kJ per cubic meter. The following materials are of practical significance: - Samarium-Cobalt (SmCo) - Neodymium-Iron-Boron (NdFeB) The production of Sm-Co and NdFeB magnets involves melting the alloy. After that, the material blocks are...

...We can offer our bar magnets in almost 100 different sizes. They have holding forces ranging from 25 g to 140 kg, so there is a suitable product for every need.

...Flat gripper with a hard ferrite magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a 10 mm threaded socket with an internal thread. It is characterized by a force of 125 N. The diameter is 40 mm, the total height is 18 mm. Design:with threaded bush  Material:hard ferrite  Force:125 N Diameter:40 mm Height:8 mm Total height:18 mm Diameter threaded bush:10 mm Thread:M5  Weight:59 g Temperature:200 °C Housing:galvanized ...

...electrically switchable These magnets are used where you want to utilize the holding force of permanent magnets for safety reasons, but also want to switch it off with a short electrical impulse, i.e., release the holding force. Handling systems with increased safety requirements are typical application areas. Your benefits: Magnetic system with high holding force when de-energized. Easy release...

...We supply permanent magnets and plastic-bonded magnets made of ferrite, neodymium, samarium-cobalt, and AlNiCo. Strong magnets that meet the right magnetic specifications. Test us!

...The EPMM magnets are used for the frequent movement of parts in the presence of electric current. Activation and deactivation times are quite short. They combine the safety of permanent magnets with the convenience of electromagnets. Only a brief pulse of current is needed for activation, thus minimizing energy consumption. EPMM 200: N. 70542 EPMM 500: N. 69840 EPMM 1000: N. 69858 EPMM 2500: N. 69758 EPMM 4000: N. 69785 EPMM 5000: N. 69841...

...Small rods, large rods - we have them all! Our neodymium magnet rods are the strongest permanent magnets in the world according to today's technology. In a practical rod form, there are more and more hollow spaces where rods can be installed. Why always put the cutlery in the drawer? Just hang it up "floating". What ideas come to your mind regarding this? Tell us about them!

...USED FOR HANDLING OF sheet steel in packs or single / slabs. Electro-permanent magnets; current is supplied to the coil only to activate or deactivate the magnet / a magnetized load may be held by the electromagnet as long as required / energy efficiency / high safety level / ease-of-operation / high level of operating efficiency...

...-Permanent Lifting Magnets are the best choice if: the load to be moved is too large for permanent magnets the lifting magnet must be operated and controlled ergonomically the geometry of the load does not fit permanent magnets the lifting magnet must be remote controlled and possibly load adjustable the load capacity is too large in relation to the material thickness for permanent magnets...

...MAXXI: Beams with permanent magnets for transporting steel loads...

...Our permanent magnets are made from ceramic or metallic materials. Whether it's for motor construction, sensor technology, or other adhesion systems – we have the right permanent magnet for you. Material Br mT bHc KA/m iHc KA/m (BH) max KJ/m3 Density g/cm3 Tw max. C° SmCo5 790 620 2000 125 8.1 250 SmCo5 830 640 1400 135 8.1 250 SmCo5 880 690 1300 155 8.1 250 SmCo5 980 710 1400 180 8.1 250 Sm2Co17 1040 750 1200 200 8.4 350 Sm2Co17 1100 800 1500 220 8.4 350...

...HIGH REMANENCE AND TEMPERATURE RESISTANCE AINiCo magnets are an alloy of aluminum, nickel, cobalt, iron, copper, and titanium. The production of these permanent magnets is done through casting or sintering. They are preferentially oriented in the axial direction and can only be magnetized in this direction.

...The permanent magnets based on intermetallic ferromagnetic compounds of rare earths are anisotropic and are produced metallurgically by sintering.

...Features – DC permanent magnet motor – Graphit-copper brushes General data – Nominal life 3000 h – RFI suppression: feasible...

... take on additional functions such as end position indication or follow-up controls. Additional travel auxiliary switches and potentiometers are available. Motor Single-phase AC synchronous motor with permanent magnets, reversible 230 V ± 10%, 50/60 Hz ± 5% Duty cycle 100% ED upon request Short start and stop times Insulation class B according to VDE 0530 Constant setting time with synchronous motors due to load-independent speed Drip-proof insulation Options: Three-phase motor DC motor Special voltages Special frequencies Gearbox Spur gear with straight-toothed steel gears Robust,...

...Features: - Highly energy-efficient due to low pressure loss and the use of high-performance permanent magnets - Suitable for liquid volumes up to 180 l/min depending on configuration and application area - Separation of 2-2000µm depending on application area - The rotation of the liquid within the filter housing accelerates particles towards the magnets, in addition to the magnetic force...

...Magnetic field sensors are particularly used for non-contact detection of piston positions in pneumatic cylinders. Through a patented operating principle, our magnetic field sensors can reliably detect permanent magnets of various strengths attached to the piston in all common cylinder shapes. The sensors are wear-free, short-circuit proof, and robust with an IP67 protection rating. Solutions are also available for use in welding or explosive environments, as well as for analog queries.

... permanent magnetic field is utilised to produce the braking effect. To neutralise the braking action, the magnetic flux of the permanent magnets is cancelled by an alternate electromagnetic field (electromagnetically released system). The zero backlash connection between the armature and flange hub ensures zero backlash transmission of the brake torque to the machine shaft (e.g. motor shaft) and...

...China Magnets Source Material Limited manufactures powerful custom permanent magnets in many shapes and sizes. We supply regular shapes like ring, disc, cylinder, block, ball, cube, and segment, as well.

...The synchronous servomotors of the series MT are brushless permanent magnet synchronous servomotors with sinusoidal back EMF and with neodym permanent magnets at the rotor. Therefore they are particulary suitable for high-quality servo applications, for example positioning demanding high standards of dynamics and accuracy. Standard configuration of the motors: 2-pole resolver feedback...

...Halbach magnets are magnets with a special arrangement designed to intensify the magnetic flux density and thereby increase efficiency. Halbach magnets are permanent magnets with a specific magnetization arrangement that can increase the magnetic flux density up to 1.5 T. They come in array and ring configurations. They are primarily used in generators and motors.

...The robust ESTAN DC motors are manufactured with a steel casing and stabilized permanent magnets. The design complies with EN 60034 and VDE 0530. Power ranges from 5 to 3,500 W. Voltages from 12 to 180 V - other voltages available upon request. ESTAN permanent magnet motors have a shunt characteristic, meaning they maintain nearly constant speed during load changes. Steep current rise curves...

...The magnetic separator removes ferromagnetic particles from liquids, such as cooling lubricants. Thanks to strong permanent magnets, it is also suitable for very fine metallic particles.

...Magnetic Conveyors - In the conveyor trough, a circulating hollow pin chain equipped with permanent magnets runs, driven by a three-phase geared motor.

...Robust housing (wall thickness 5 mm) made of aluminum or stainless steel - shaft and ball bearing with shaft seal - rotor with shaft, gearbox, and permanent magnets mounted in a pre-chamber - sensor circuit consisting of ASICs with Hall elements and interface electronics housed in a sealed main chamber - detection of revolutions through absolute multiturn gearbox - for protection class IP 69K...

... contact and activates it. The repulsion between the similarly charged permanent magnets supports the buoyancy (version VK..deviating). As soon as the level drops again, the float follows and reactivates the reed contact. The level switches of the VK series are made of plastic and are available with various float variants and PVC jacketed cables. Switching function: Contact opens at falling level Nominal pressure: PN 10 Temperature ranges: Medium Max. 100 °C Ambient -25...70 °C...

...Digital servo controllers KTx/KMx for the operation of three-phase servo synchronous motors and torque motors with permanent magnets are compact devices designed for cabinet mounting. The KTx/KMx servo controllers are optimized for use with KSY servo synchronous motors and KTY torque motors, and are complemented by software and accessories. All components of the drive package have been tested as a combination. With the delivery "from a single source," GEORGII KOBOLD ensures trouble-free commissioning, reliable operation, and clear system responsibility with just one supplier.

...Torque motors as internal rotors, equipped with permanent magnets (neodymium magnets). These direct drives are also known as permanent magnet synchronous machines.