conduits Germany

... returned from the destination container to the source container through the gas displacement conduit. The gas and liquid conduits are additionally equipped with shut-off valves. Gas-tight pumps are used for substances with strong odors, such as ammonia. Suction power: 200 ml/stroke of the piston.

... using stainless steel or plastic fasteners The SWS system consists of a 5 mm support rod that is both bendable and sturdy, with open guiding rings that hold the cable. It guides conductors and conduits of up to 16 mm in diameter: in a straight line and at corners. The support rods are secured using plastic mounting discs or screwable stainless steel fasteners that can, for example, be welded onto the machine body.

...When pipes or cables pass through exterior walls, ceilings, or protective conduits, it must be ensured that the entry points are permanently sealed. KETTNER building penetrations and sealing sets allow for easy, quick, and clean passage of pipes and cables through walls, ceilings, and protective conduits. The sealing sets are designed to be pressure-tight in two stages (20 mWS / 50 mWS) and...

...The H1Z2Z2-K has been tested in accordance with the requirements of the harmonized standard EN 50618 - Use and type of installation for applications in photovoltaics (HD 60364-7-712). - For fixed installation indoors and outdoors. - For installation in conduits, pipelines, and similar systems. - Direct burial, weather and water resistant. - The cables are suitable for use with Class II and earth fault protection according to HD 60364-5-52.

...Optigrun Triangle Maxi Inspection Chamber TMK suitable for negative pressure drainage. Combinable with Triangle and TSK water discharge systems. Drainage capacity for 2 % roof pitch and profiles connected to all four sides: 24 l/s. Extendable in 50 and 100 mm increments. Material:Aluminium Length/width:440 x 440 mm Height:min. 100 mm Drainage performance:Max. 24 l/s (with water conduits connected on all sides and 2.0% roof pitch)...

...Unobtrusive, RKSlimlift is designed to be slim and highly load-bearing. The entire drive unit saves space and is housed within the column, making it virtually invisible from the outside. Side fixing grooves provide space for the application of additional parts, such as coverings, conduits, and bracing.

... conduits inside the system provide space for multiple cables such as HDMI, DVI, or network connectors. All rotating system elements come standard with integrated cable protectors. The built-in potential equalization protects both people and machines. An adjustment screw system in the joints allows for the setting of any pivot range in 30° increments. A reducing adapter also provides the connection of profiPLUS 50 to the larger profiPLUS 70 system for greater loads. GD-ALSi12 (DIN 1725): Aluminum...

...Electrical cables, e.g., power cables, telephone cables, data cables, fiber optic cables Flammable pipes, e.g., PB, PE, PVC, composite pipes, as well as empty conduits for electrical cables with a maximum outer diameter of 32 mm Non-flammable pipes, e.g., copper, steel, and cast iron with a maximum outer diameter of 160 mm...

...WDM Deutenberg produces corrosion-resistant cable conduits. We permanently guarantee to fulfill your high security standards for functional integrity in case of fire, earth quake or vandalism. bare wire:according to EN 10016 or EN 10025 Vorverzinkter Draht:according to EN 10204 galvanized wire:zinc coating according to EN 10244-2 stainless steel wire:1.4301, 1.4404, 1.4571...

...Cable conduits made of PE-HD with plug-in sleeve Manufactured acc. to DIN 16876 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Quality: DIN 16874 Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications...

IWM Strahltechnik was founded in 1991 by Andreas Koal and Dipl.-Ing. Werner Müllerschön and employs a team of 16 staff members. With over 20 years of experience in customer-oriented development and the planning of innovative blasting technology at a high quality level, IWM-Dautphetal stands out. In addition to the distribution of blasting systems, consumables, accessories, and service, the compa...

Since 1845, the family business CARL TURCK has been based in Halver, Sauerland, now managed by the 6th generation. Valuable experiences in stamping and bending technology have been passed down through generations, and production capabilities and processes have been continuously optimized. We respond competently to the demands of our customers. Products are constantly being developed further. We ha...

The Geissel Group is one of the leading manufacturers of cable glands and accessories as well as precision turned parts. Founded in 1920 by Wilhelm Geissel, our family-owned company stands for quality, tradition, and innovation with 160 employees worldwide. The history of our company is typical of the Baden-Württemberg medium-sized enterprises. It all started as a small turning shop producing bras...

The company Josef Jasper GmbH & Co. KG is a medium-sized corporate group with several production sites. We manufacture customized solutions for our clients in the industrial sector, plant engineering, chemistry and petrochemistry, as well as power plant technology in the areas of vessel and apparatus construction, large pipelines, fittings, quick-release couplings, autoclaves, and industrial chim...

... 230V, 2x LED ceiling lights, switch, cable conduits, cables). Vinyl PVC flooring 2-3mm - durable and easy to clean. Eyelets for unloading with a crane. Please provide appropriate equipment for unloading, e.g., forklift, wheeled loader with pallet forks, or crane. We can manufacture other sizes and colors according to your specifications on short notice.

... systems from FIPSYSTEMS. The high-temperature corrugated conduits, made of high-tech polymer materials, are suitable for cable protection applications with high continuous temperature requirements and for maximum chemical resistance. Temperature range:–60 to +150 °C Filling ratio (max.):70 % Free from halogens and cadmium:no Fire classification:V0 (UL 94 standards) Fire characteristic of the product:self-extinguishing (UL 1696 standards) Flammability:self-extinguishing (FMVSS 302 standards) UV and weathering performance:very good (IS FIP - up to 30 years)...

...Stainless Steel Corrugated Pipe CSST316L for Water Supply in Ring Bund, Annealed - 10 - 100m Widely used in the installation of flexible hoses for water-carrying devices, gas appliances, water underfloor heating, fire extinguishing systems, and climate and ventilation systems. Used as cable conduits, the corrugated pipes protect power and low-voltage cables from external influences. Flexible...

...Our solid concrete ceilings can be customized to fit your project. By incorporating ceiling cutouts, openings, and the installation of empty conduits, we reduce the workload on the construction site. • Max. element length 8.0m • Max. element width 3.60m • Thickness: 16 – 30cm • Concrete strength class: C25/30 • Cutouts and electrical boxes possible Further dimensions available upon request.

... suitable for higher temperatures during short circuits and overloads. The PE sheath of the BayEnergy® NS network cables is particularly robust and features excellent mechanical properties and increased thermal pressure resistance. Manufacturing according to national and international standards upon request. Cables according to customer specifications upon request. Construction Products Regulation upon request. Current-carrying capacities (continuous load / industrial load / emergency operation) for installation in the ground, conduits, and outdoors.

... indoor and outdoor installation, can be laid in cable trays, conduits, and cable ducts. Rodent protection, halogen-free, longitudinally waterproof, metal-free, LSZH jacket in black, UV-resistant. Gel-filled bundle fiber, 250µ colored fiber coating. IEC 60332-1, low smoke IEC 61034, IEC 11801, EN50173 including pulling aid, 40mm diameter reusable. Outer diameter of the splitter: 15.5mm, outer diameter of the pulling aid: 40mm.

...For use in the electricity sector, transportation, or communication technology, we offer you a diverse range of cable protection solutions. KURO cable protection pipes made from phthalate-free PVC-U are ideally suited for the non-pressurized underground installation of energy and telecommunications cables, protecting against any mechanical damage or serving as cable conduits. YOUR ADVANTAGES...

... from lightweight or normal concrete. Quickly assembled on-site, they save the builder significant time and costs. • specifically for row and multi-family houses • high dimensional accuracy • empty conduits, electrical boxes, and recess bodies pre-installed from the factory • smooth surfaces (paintable/wallpaperable after appropriate pre-treatment) • cost and time savings • wall thicknesses from 10 to 24 cm • quick assembly...

...Available in a variety of sizes for HVAC, industrial, and condenser applications Our aluminum round tubes can be designed for many industrial and commercial uses, but are ideal for heat transfer applications where weight and space are design concerns, including in HVAC units, manifolds, evaporators, and condensers. Other applications include electrical conduits and general tubing for plumbing...

...Vacuuming gravel and soil to prepare the infrastructure (cables, conduits, foundations) - Gravel replacement - Cleaning work for drainage shafts - Cleaning of the track bed...

...Quick fastening solutions for electrical conduits and pipelines with easy handling When installing pipelines, cost-effectiveness and safety are the main focus. fischer offers fasteners made of plastic and metal for the installation of electrical conduits and pipelines. The combination of fastening elements with innovative solutions such as steckfix plus, the drive nail, or suitable fasteners from the extensive fischer dowel range ensures that the pipelines are secured in the best possible way.

... Technology ITB (EN ISO 846). It has a technical recommendation from the Research Institute for Roads and Bridges IBDiM RT/2009-03-0025 for sealing joints and cracks in bridges, tunnels, and conduits. Its thixotropic properties allow for applications in vertical joints and ceilings. [APPLICATION:]  For filling expansion joints and structural joints in cement floors  Sealing of joints and expansion joints in residential and industrial buildings, particularly in concrete structures. Can also be used between weaker substrates such as...

...In a wide range of applications, pipes are used for the conduction or distribution of gases, liquids, or solids, or simply as protective conduits. The images show you a selection of the many possibilities of components we can manufacture from piping – in addition to industrial piping construction. What ideas do you have?

...The studio connection cables manufactured by BDA CONNECTIVITY consist of coaxial video cables encased or combinations of coaxial video cables and power cables. Combinations of video and power cables are used when separate power for the camera (control cable, lighting, etc.) is not possible on-site. The side-by-side arrangement keeps the conduits for individual components accessible, even after separation.

... (DN25), proven by DVGW. Both conduits consist of a pipe instead of a thread connection and can be joined comfortably by means of various PE pipe connectors, either by screwing, plugging-in or welding. Material box:Kunststoff Material inside installation:PE-pipes, brass connectors (zapproved by DVGW, KTW, DIN 2000) Connection:2x PE- pipes 32mm (DN25) Height (adjustable):115-131cm Basis:60 x 40cm Weight:17,5kg...

...without additional cutting aids. Other hollow chamber profiles can be found in retail as product separators, in construction, and in the garden as technical profiles, seals, empty conduits, protective sleeves, and grip coverings. Our customers describe our products and materials as pleasant and skin-friendly, cold-insulating, and depending on the material, slip-resistant. They are easy to clean and, above all, lightweight and cost-effective. See for yourself!