...The key to success in optimizing compressedair is data. The METPOINT® measurement range includes sensors and data loggers for monitoring and visualizing data, ensuring the actual quality of compressedair is controlled and identifying hidden cost factors. Our measuring instruments can also be used as an extension of a system and for the early detection of malfunctions.
Through our sensors, it...
...Manometers and thermometers are suitable for various applications in pressure and temperature measurement. We offer solutions for both gaseous and liquid measuring substances. The range includes capsule, diaphragm, or bourdon tube manometers and measuring devices in various materials, from standard models to stainless steel versions for use in corrosive environments, as well as electronic measuring technology.
... impacts. The measurement output is digital via an I²C interface, with the address being customer-specific. Thanks to the bus capability of the interface, combining multiple sensors within a system is easily achievable.
Measurement range:: 0...80% rH, 80 - 100% rH (short-term); -40..+100°C
Accuracy:: +/- 1.8% rH in the range of 10..80% rH; +/- 0.2% rH in the range of 0..10% rH; +/- 0.2° C in the range of 0..60°C
Operating pressure:: max. 150 bar...
... use...".
For quick on-site verification of portable testing devices based on gas pressure measurement (Wio Check and Twin Check 4.0), Martechnic® has developed the MT Test Kit Verifier. The Verifier is useful for assessing the tightness of the testing devices, the functionality of the software, and measurement accuracy.
... enables a permanently oil-free compressedair supply.
—OIL-Check 400 – Residual oil measurement of vaporized residual oil content from 0.001…2.5 mg/m³, 3…16 bar. Highly accurate PID sensor, integrated mini-catalyst for zero-point calibration
—Permanent, highly accurate residual oil measurement (oil vapor) with PID sensor (Photo-Ionization Detector)
—Long-term stable measurement results through automatic zero-point calibration. The integrated mini-catalyst reliably generates a defined reference gas for zero-point calibration.
...Stationary and mobile consumption measurement in compressedair and gases, laminar flow measurement, measurement of burner supply air and leakage flows.
The measurement principle is based on the heat transfer from an electrically heated body to the surrounding medium. Thermal flow sensors primarily measure the standard flow velocity Nv. From this, the standard volume flow and mass flow can be...
AGO Hydroair GmbH is an innovative company that has been successfully planning, building, and operating systems in the field of environmental technology for years.
AGO Hydroair draws on the diverse expertise of its engineers and is available to customers as: consultants, planners, and general contractors.
Planning, manufacturing, and installation of specialized applications such as ventilation s...
...The spring pressure reducer is used for single-stage reduction of compressedair and neutral gases. The adjustment of the set pressure is done via a spring.
Series Version
Nominal Diameter: DN 6 to DN 100
Nominal Pressure: up to PN 320 bar
Operating Temperature: -30 to +80 °C
Operating Medium: Compressedair and neutral gases
Inlet Pressure: max. 320 bar
Installation Position: any
Connections: threaded connections
Function Test: Pressure reducer (including performance measurement)
Materials
Housing: 2.0967
Internal Parts: 2.0967 / 2.0958 / 1.4310
Seals: NBR / PA6.6...
...As a supplement to our range of infrared temperature measuring devices we offer a wide range of accessories. You have a wide choice of mechanical and optical accessories, air purge units, relay cards and software.
Name:Air purge unit
Hose connection:3x 5 mm for compressedair
Connection:M12x1
Across flat width:AF 19
Dimensions:Ø21 x L45 m
Weight:0.15 kg...
...Document your compressedair station with:
Compressedair consumption chart
Pressure diagram
Compressor running times for: LOAD and IDLE
Overall chart
Energy table
The weekly chart
Provides an overview of compressedair consumption for each day.
Each individual day can be selected with a mouse click.
The calculation table shows:
Load and idle times
Kilowatt hours generated cubic meters
Costs in every currency
Compressedair costs € /m³...
...Differential pressure 0 … 1.6 mbar to 0 … 1000 mbar
Accuracy: 0.5% FSO BFSL
Current and voltage output signals in 2- and 3-wire technology
Selectable measurement ranges
Adjustable damping
The IDPS 300 pressure transmitter has been designed for the differential pressure measurement of dry, non-aggressive gases and compressedair, and can be used for a wide range of HVAC applications.
The IDPS...
... a PNP contact and a rotatable display module with 4-digit LED display for representing the differential pressure. Optional up to 2 freely configurable contacts are available.
Features:
— nominal pressure: 0 ... 6 mbar up to 0 ... 1000 mbar
— accuracy: 0.35 % FSO
— aluminium housing
— rotatable and configurable display module
— 4-digit LED display
— suited for non-aggressive gases and compressedair
Optional Features:
— 1 / 2 PNP contacts
— customer specific versions...
...Testing System
Width: 810 mm
Depth: 1,000 mm
Height: 1,920 - 2,700 mm
Power Supply: 230 V/50 Hz/10 A
CompressedAir: 6 - 8 bar
(only necessary with Option Hacker)
Space for at least 4 cameras
Side exchangeable plate
Hood opens upwards
Easy access for installation and replacement of the exchangeable plate
Control panel pivotable
Belt drive pivotable...
...Compressedair and natural gas meters with M-Bus now directly from the original manufacturer.
CS Instruments GmbH & Co. KG was the OEM manufacturer of the ENDYS AIRcompressedair meters with M-Bus from 2010 until the end of 2017. The ENDYS AIR products were exclusively marketed through Hochhut GmbH, which is now collaborating with another manufacturer. CS Instruments GmbH & Co. KG is now...
... compressedair
With individually tailored nozzle cross-sections and rotational speeds.
Angle of the cleaning nozzles infinitely adjustable
Air connection: G3/8"
Height 60mm, Diameter: Working width (selectable) + 20.5mm...
... can be used in many fields of industry, which is appreciated.
Examples include:
- Introducing force measurements on longitudinal and transverse connections
- Compression force measurements on roller and drilling applications
- Spring tension measurements on automotive shock absorbers
- Determining contact pressure in push rods
- Compression force measurements on compressedair knee-lever presses
Type: Compression
Structure: Button
Other features: Compact, made of stainless steel
Additional features: Miniature, for strain gauge bridge...
... is done using a compressedair pulse via solenoid valves. This method of cleaning is very economical, as it is demand-dependent based on differential pressure measurement. The installation and removal of the filter bags are carried out without tools from a mounting platform. Systems that operate in frost-prone areas are equipped with valve heating and an additional cover for the solenoid valves. The required piping layout is designed individually. Hellmich exclusively uses branded components for electronic or electrical assemblies...
...
* Optionally with electric or compressedair drive
* Low loss of medium when disconnected
* Simple installation
* Easy to dismantle
* Small footprint
* Automatic emergency stop function of the motor in case of leakage detection
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter....
...Measurement principle: calorimetric
Measurement range: 0 - 5 m/s to 0 - 50 m/s
Pressure: atmospheric (with flange) or max. 1 bar (with PG 21)
Current output: 4 - 20 mA
Operating voltage: 18 - 30 VDC
Other versions: stainless steel version (3205.30/xx) for compressedair up to 10 bar...
... precision of down to one micrometre per millimetre of strip thickness, they meet the demands of modern rolling mills. Contact gauges adapt to the strip passage and follow any waviness of the material.
Material to be measured:Metal strip
Maximal strip temperature:120 °C (up to 200 °C with reduced accuracy)
Measurement resolution:0.1 µm
Sampling rate:1 kHz
Averaging time Ti:1 – 2,000 ms
Protection class:Gauge head: IP64; pneumatic cabinet: IP55; control cabinet: IP55
Compressedair supply:Pressure: min. 5 bar, consumption: max. 7 m³/h...
... humidity not only by utilising ambient air and the built-in heatable water container, but also via an external gas supply with compressedair, nitrogen, and argon. Variable flow rates between 70 and 3500 ml per minute are possible. The integrated pressure regulator is specially calibrated for nitrogen and argon. ...
...The innovative technology of our CTS temperature shock test chambers allows for temperature changes of up to 100 K/min.
The most common national and international standards (DIN, IEC, MIL) are met. The standard compressedair drying system enables up to 3000 test cycles without defrosting.
...In the encapsulated length measuring devices from HEIDENHAIN, an aluminum housing protects the scale, the scanning carriage, and its guide from chips, dust, and splashes, with a protection class of IP 53 according to EN 60529.
Elastic sealing lips close the housing at the bottom. By applying compressedair, a protection class of IP 64 can be achieved. The scanning carriage is guided with low...
...The flow tester CETATEST 915 is used for flow testing with compressedair. It includes a measuring system consisting of laminar flow element (LFE) and differential pressure sensor In the direct test method the air, provided by the internal pressure regulator, flows through the measuring section before it enters the test part.In the indirect method, the measuring section is located in the outlet...
...The robust BCP-CH4 methane sensor is based on infrared gas measurement techique and is available in 2 different wavelengths. Minimum flow is not needed and it can be integrated directly into the gas pipe. A gas cooling is no longer required. Monthly adjustment can be done with fresh air. The sensor is longterm stable and IP65 accredited. The production of methane in biogas plants (methane...
...The KAL 100 / 200 calibrator is both a pressure transmitter and a pressure measurement instrument. It allows for the simple verification and calibration of pressure sensors and other measuring instruments for low pressures. The desired pressure is displayed digitally. A control circuit ensures rapid and precise pressure generation, so there is no need to connect to an external compressedair...
...The VTX2 vortex meter is used for flow and volumetric measurements of conductive and non-conductive fluids, gases and vapours in all industrial branches. Applications include volumetric measurements for balancing (compressedair systems, heat carriers, vapours, chemical products, for example), process control and high throughput applications.
Technical specifications • DN 15 - 300 (higher on...