cables with material for insulation Germany

... and shaped without breaking or cracking. It is commonly used in electrical engineering, electronics, telecommunications, and other industrial applications where high mechanical stability and insulation capability are required. Available from us in various sizes, colors, and lengths.

...The ALUKAFLEX® 07BN4-AF series meets all structural and material properties as specified by DIN EN 50525-2-21, as well as the applicable standards EN 50363-1 and -2-1 (material) and IEC 60228 (conductors), with the exception that aluminum is used as the conductor material instead of copper. Due to this deviation, the ALUKAFLEX® series is, of course, not a harmonized cable, so the harmonization...

...The PERFECT cable gland with spiral top is the ideal solution for flexible mobile cables. Properties: — perfect retention and total insulation of the cable — integrated cable anchoring — high clamping capacity — suitable for a wide range of cables from 3 to 18 mm in diameter — easy to install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, temporary) — protection type IP68 - 5 bar — tested to UL 514B standard — with metric, Pg, or NPT thread Material: Polyamide PA6 Protection type: IP68 - 5 bar For cable diameter: 3 - 18 mm...

...TEXTALU® E is a thin wall glass fibre braid made of glass fibres with heat-reflecting aluminium coating. Its reflecting surface guarantees that the protective sleeve made of this high-performance material maintains a nearly constant interior temperature even under strongly fluctuating ambient temperatures. This non-ductile braid sleeve is ideal for protecting lines, cables and cable sets against radiation heat. Temperature range:-40 °C to +220 °C (intermittent +350 °C) Form as supplied:alternatively in cut lengths according to customer desires Colours:Standard: aluminium (-8)...

...• With protective cap • With straight, sharp semicircular blade for plastic cables • With fixed blade • Ergonomic safety handle made of multi-component impact-resistant viscoelastic plastic with integrated soft zone • Insulation according to DIN EN/IEC 60900 • Stainless steel blade, tempered Length in millimeters: 190 Weight in grams: 95...

...Typical application: Thermal insulation material for cables and pipelines for high temperature applications. The products are based on textured special glass and can be identified by their light green colour. Extremely textile properties even at high temperatures are their particular characteristic. isoTHERM® 800 is absolutely harmless to health, withstands high temperatures and has excellent...

...High-performance three-phase sine filter from 2 – 600 A Nominal voltage 400 V (also available in 500 V / 690 V) Recommended for variable frequency drive (VFD) operation with long motor cables Produces sinusoidal output voltage Enables VFD operation with unshielded motor cables Reduces motor noise Protects motor windings and bearings Reduces du/dt values (voltage spikes) Reduces high-frequency leakage currents Improves EMC (reduced emissions) UL approved insulation material Also available as 4-wire sine filter (all-pole)...

... starting from 30 millimeters upwards All insulation material classes High-temperature wires Tinning technology and termination technology Bare and insulated ferrules Cable lugs in every shape and design Flat connectors and flat plugs Crimping and soldering methods Crimped wire chains Wires with intermediate stripping and partial stripping Cut wires, bare and insulated Bare and insulated wire bridges For all crimp and compression connections, we check the pull-out forces and document them for you.

... (stranded) Sheath material: PVC DMV6 Sheath color: red Technical Properties Max. conductor temperature: 90°C Max. cable fixed installation: 70°C Max. cable in motion: -5°C - +70°C Flame resistance: According to VDE 0482-332-1-2/IEC 60332-1 Bending radius, fixed installation: 15 x outer diameter Partial discharge: 2 pC...

...To automatically unwind, feed, print, cut, and lay down Radox cables, a leading global manufacturer of rail vehicles relies on a Metzner production line. The printing of the material had to meet the requirements for rail vehicles and therefore needed to have a very long durability. Metzner Maschinenbau GmbH developed a custom automatic production line that can process cable strands with a cross...

...Spiral Cables Customized to Your Specifications Special cables are those that deviate from the configuration of a standard cable. This may involve the number of strands or the type of conductor material used. However, there can also be special adjustments in the technical specifications – such as cross-section, insulation, length, color, or shape. If a cable needs to meet specific requirements...

...The thinnest paper yarns in the world ! Paper cable yarns are used to obtain a regular air space between the copper conductor and the paper insulation. The yarns must have an exact diameter and may not become flat being wrapped on the conductor. Furthermore, the paper cable yarns can be used to exact standard measures as center elements or filling string. The raw material basis of our...

...Heat-shrinkable end caps and split caps made of polyolefin Adhesive-coated end caps for sealing cable and pipe ends against moisture and other media The adhesive-coated split caps are suitable for insulating and sealing multi-conductor cables and branch connections. The weather-resistant and UV-resistant material is excellent for electrical insulation.

... LEONI Smooth-Bunch strands have a particularly compact and precise round structure and exhibit very good bending fatigue properties. They are especially suitable for highly dynamic applications, as well as in areas where weight, space, or installation volume and insulation material need to be minimized.

...Copper foil, copper laminating foil for cables in the low and medium voltage range as well as coaxial cables in the radio frequency range. The copper is flexible enough to wrap around the cable core. It also has excellent physical properties. The polyester film provides electrical insulation and high mechanical properties in combination. The foil is versatile. Suitable for technical applications...

...Products for industrial cable protection systems - Safety even under extreme conditions Cables are often exposed to various safety risks: Overheating Cold Humidity v.m. Adequate protection is therefore essential if you want to be sure that all connected devices and applications function smoothly. At FRÄNKISCHE you will therefore find products for high-quality industrial cable protection...

...Operating voltage: 630 V AC/DC - 12 A per pin - 4-pole - S-coded - Temperature (fixed cable): -25 to +80°C - Temperature (flexible cable): -20 to +80°C - Material: PUR - Very compact connection for cables with conductors up to 2.5 mm² - Reverse polarity, shock, and vibration resistant - Made of plastic with high-quality and safe insulation - Overmolded cables Type: Power supply Format: DIN Shape: Round Connection type: External/Internal Size: M12 Electrical specification: High performance 630V AC/DC Additional feature: Multi-coupling...

...Device Details: ▪ easy separation of cable sheaths from the electrical conductor ▪ suitable for samples with a high grip fit ▪ suitable for cables with larger diameters and made of hard materials (depending on wall thickness) ▪ appropriate preparation for cutting cable samples with the ORC family Width x Depth x Height: 430 x 800 x 430 mm Weight: 54 kg Material: Stainless steel, aluminum, PVC Stripping: approx. 10 mm - max. 250 mm Ø - Cable sample: 15 - 100 mm Cable sample length: min. 150 mm (with 50 mm stripping)...

...Of course, EMA-TEC GmbH also supplies spare parts for induction systems, such as: Thyristors and fuses Switchgear MF capacitors and MF transformers Temperature measurement technology, sensors, and monitoring devices Insulation and fire-resistant materials Parts of the cooling water system, including electrical insulation hoses Parts of the material transport system, drives, and roller tracks Water-cooled high-current cables, busbars...

... approvals of various industries. My mission - I want to give you the opportunity to order high-quality insulation solutions based on your needs, away from full packaging units, thus contributing to the environment and climate. This way, excess material goes directly to the next consumer and does not need to be disposed of or wasted. Fast & uncomplicated.

... standards in all process steps - Latest testing and laboratory facilities - High technical know-how - Innovative approaches in the development and construction of cables - Excellent precision, dimensional accuracy, and concentricity, as well as low tolerances even in series production - UL approvals, material testing, and the use of high-quality raw materials - Reliable service and competent advice...

... materials and, when necessary (e.g., for cardiac electrodes), also taking into account sufficient dielectric values. For this purpose, we have particularly pure manufacturing areas and specialized equipment. Integrated measuring and testing facilities ensure high quality standards and control the process. The material and manufacturing data can also be traced back for years later. As standard...

... projects with competent advice, assistance in material selection, and geometry. Our software-supported design program complements your project documentation and helps you in decision-making. At the request of our customers, we carry out contract cleaning based on perchloroethylene and modified alcohol using a full vacuum system. New in the program is alkaline cleaning for small load carriers and...

...We produce mica products and solutions for: Cable Industry: Energy and data cables, fire protection, etc. Sealing Industry: Exhaust systems, chemical & petrochemical, medical, fuel cells, gas turbines Electrical Industry: Plant construction, heating devices, electrical energy, batteries Heavy Industry: Construction and insulation of melting units We manufacture SW laminates consisting of hardened epoxy resin, melamine resin, silicone resin reinforced with glass fabric. EPGC 203, EPGC 205, EPGC 308 (G11), UPGM 203 (GPO-3), MFG 201 (G-5)...

MG MaschineMaterial GmbH provides high-quality insulation material products, including primarily polyimide films, laminated products, and adhesive tapes for electrical insulation.

... standard PA66 design, with stainless steel tongue, completely made of stainless steel, of the resistant material PP or of Velcro. Always in best quality and usually from stock. We also offer a wide range of cable lugs, in uninsulated design, with PVC protection or also provided with heat shrink insulation. For a clean and safe connection, you will also find wire end ferrules in our delivery programme, which are manufactured according to different DIN colour codes.