gas water heaters

...The PGME gas heater is designed to heat a large volume of gas. The gas heater consists of a coil immersed in a water bath heated by a state-of-the-art, controlled combustion burner. Each application is specifically studied to find the best compromise between cost, footprint, and efficiency. To prevent the formation of hydrates at gas pressure reduction stations, PGME offers heaters that increase...

...Hot water heaters are designed as radiation heating boilers with downstream convection heating surfaces in a three-pass system. The piping system is surrounded by a steel sheet casing and mineral wool insulation.

... called air heaters or air coolers. Air-water heat exchangers are often also used as exhaust gas heat exchangers or flue gas heat exchangers in order to recover the energy from warm or hot exhaust gases. Lamella packs for a large exchange area In order to achieve the largest possible exchange surface between the air and the medium (liquid) within the heat exchanger, lamellas or lamella packs...

... offer a complete package, wide range of HVAC products directly from our huge stock in Turkey for export: Boilers (wall-hung domestic type boilers / industrial type gas boilers), panel radiators, towel warmers, electrical/gas water heaters (instantaneous water heaters, storage tank water heaters), air-conditioners, natural gas space heaters, gas heater fans, spare parts of boilers, plumbing...

...Immersion heaters from 0,1 kW up to 300 kW for tank heating or as components for machines: - Lube oil heaters for compressors, pumps, turbomachinery, refrigeration machines and others - Tank heaters for oil, water and other liquids - Gas heaters for process applications - Anticondensation heaters for electrical motors and machine housings Range from 0,1 kW up to 300 kW ATEX, IECEx, TR-CU and other international certificates...

... can be used with sealed system boilers and heating circuits on Y plan systems. These low maintenance pre plumbed units provide flow rates up to 30 litres per minute and if linked to the appropriate gas, oil, or LPG boiler are suitable for average to larger properties. The bottom coil must be pumped. The units look smart too, with a wipe-clean white appliance finish, and the insulation is 60mm foam injected for maximum efficiencies. Stainless steel construction offers a lightweight long life product. The stores are guaranteed for ten years, the parts for two.

...-1000 mm, 750-1500 mm, 1000-2000 mm Fields of Application: For connections of Cookers / For connections of Boilers / For connections of Water Heaters / For connections of Stoves Nominal Diameter DN: DN15-DN20 Connection Type : MF (Male x Female), FF (Female x Female) Extensible Length: 10-20, 20-40, 30-60, 50-100, 75-150, 100-200 cm...

...Safety valve. Body: CW617N Spring: Stainless steel Seals Synthetic rubber "anti-stick" Threaded connections Gas cylindrical ISO 228 Max operating temperature + 95°C Setting pressure 6÷10bar (other settings or special versions available upon request) Certified according to PED Directive.

...Hot air fan heaters with water coil (20 to 106 kW) - ATR The hot air heaters with hot water coil are ideal for heating all types of commercial, industrial or agricultural premises where a flow of hot air is required to heat different areas of the premises to be heated. The hot water must be produced by a diesel, gas or biomass boiler. The hot water, by means of a circulation pump, passes...

...Electric oven 240 volts or 400 volts Constant water temperature Touch screen...

... refrigerants. Air distribution and return are achieved through ducting, which is the best solution for cooling complex spaces. The use of various compressor and refrigerant types ensures seamless operation at high cooling water temperatures. Heating can be provided by electric heaters, steam, hot water, and thermal oil sources. Cooling Capacity: 5 kW - 192 kW Dust Resistant: Dust-resistant design Corrosion Resistant: Corrosion-resistant design Vibration Resistant: Vibration-resistant design...

... operate silently and without fumes – consequently raising no health and safety issues; Installation is much cheaper than oil or gas alternatives – all you require is electric cable; No maintenance. You do not have to maintain an infrared heater once installed; You can “focus” the heat exactly to where you want it – because there is no convection of heat, none is wasted blowing into areas it is not wanted; Far Infrared has been shown to have positive effects on metabolism, being the waveband at which water (80% constituent of skin) most effectively absorbs heat.

...Turkey's Slimmest Hermetic Water Heater 11 cm 12 l/min capacity Constant water temperature...

...Thorne & Derrick supply the HVAC and M&E Building Services industry with an extensive range of Leak Detection (Water & Gas), Trace Heating, Valves, Washroom Controls, Metering and Temperature Measurement & Humidity Measurement products – many HVAC products are compliant, accredited and approved under BREEAM, WRAS and TMV3 construction industry schemes. T&D distribute for Andel, ASCO...

...Ignition burners for gas heating appliances, gas specialty boilers, gas water heaters, gas heating and cooking stoves, and catering equipment such as cookers, bain-maries, fryers, and others. Ignition burners are versatile and are traditionally used for the safe ignition of gas burners. Ignition burners are used, for example, in industrial furnaces, thermal processing systems, and boilers for...

...Monitoring of Frost and Corrosion Protection of Heat Transfer Media Regular monitoring of water quality in preheating systems and heaters is essential for smooth and safe operation and is therefore mandatory according to the regulations of the DVGW (Guideline G 495). A carefully dosed corrosion protection and the correctly adjusted water quality (e.g., pH value, possibly frost protection) form...

...troubleshooting, and maintenance of your heating and plumbing Heating We provide sales, installation, and after-sales service for all heating systems and ensure that we offer you tailored solutions in terms of energy savings and thermal comfort. Electric, gas, and fuel boilers Heat pumps Reversible air conditioning Thermodynamic water heaters Underfloor heating Atlantic Fuel Gaz, the specialist for the maintenance and upkeep of your heating in Saint-Nazaire 5, av Barbara – BP 12, 44570 TRIGNAC 02 40 53 00 54...

... the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and...

... more. Depending on the model, they come with one (VTP-1), two (VTP-2), or three (VTP-3) flanges for mounting heat exchangers and can work in "Turbo-boiler" systems. Models VTP-4 and VTP-5 have a built-in bottom heat exchanger for monovalent DHW systems, with VTP-5 is the ability to mount an additional upper flange exchanger. VTP-6 features two fixed heat exchangers for bivalent systems, with the lower connected to low-temperature sources (solar collectors, heat pumps) and the upper to high-temperature sources (gas, electric boilers). An inspection flange is provided for maintenance.

...We offer ECS - Domestic Hot Water - heaters in case of a breakdown of your usual equipment or for occasional needs to provide hot water. Our solutions adapt to any type of energy used (fuel oil, gas, or electricity), and to any available location. Our heaters come in various power levels to meet the needs of small collectives or larger ones. Main features: - Power ranging from 200 to 600 kW...

... with gas and oil boilers, instantaneous water heaters, wood and pellet heating systems, heat pumps, solar systems, and electric heating elements. Especially in combination with condensing units, the stratified storage ensures optimal condensation and thus the highest energy yield.

...Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for...

... • Under normal conditions, freezing does not occur in the installation. • The Hot Oil Boiler can also be used as a heating fluid in the production of Steam, Hot Water, Boiling Water. • Hot oil outlet temperature is controlled by PID controller. • Hot oil return temperature is controlled by digital thermostats. • Ekotek Heating Technologies recommends all the accessories and burner systems that are used in Package System Hot Oil Boilers (Thermal Oil Heaters) from brands with known safety, Gas fuel type...

...Sections: Liquid Heating, Air and Gas Heating, Fin Heaters, Accessories for Immersion Heaters Waterproof cover IP 44 IP 55 IP 65 for immersion heater, water, oil, fuel Seal diameter 77 Made of aluminum, adjustable, with lateral PE Protection IP 467...

... contact us by email or phone at 071.750.600, and we will respond as soon as possible. Which devices are covered? Buderus Logamax range up to 45 kW (wall-mounted boilers) Buderus Logano range up to 50 kW (floor-standing boilers) What elements are not covered by the warranty? All external devices such as water heaters, controls, and thermostats. Wear parts, including body components, ionization electrode, ignition electrode, spark plug, fuse, accessories (for the boiler), and seals. To benefit from this warranty...

...OK natural gas heaters are fully automatic, directly heated water bath preheaters, specifically designed for the preheating of natural gas.

... heating presence) to the biggest boilers located in central heating sources (big boiler rooms with pipe distribution network to remote objects). Boiler´s media: Water (warm/hot), Steam (low/mid/high pressure), Oil b) air heaters (air/air, water/air exchangers) c) ovens/furnaces (generally) d) dryers (generally) e) food industry (bakery, brewery, sugar refinery, … ) f) industrial drying furnaces (stone, wood, …) g) paper industry – drying oven h) communal waste incinerators i) composting and sanitary process...

...• Development, manufacturing, and installation of gas technology systems • Planning and installation of pipelines for technical gases, laboratory gases, compressed air, vacuum, water, as well as exhaust and flue gas systems • Production of pressure vessels and apparatuses (e.g., gas humidifiers, gas heaters, storage tanks, and heat exchangers)...

... increase even more. Currently, workpieces with a minimum wall thickness of 0.60 mm can be welded. In submerged arc applications, the wall thickness is up to 20-25 mm. Boilers, water heaters, solar energy boilers, cooling tanks, natural gas chimneys, LPG tubes etc. Length welds of materials are made on this machine. Submerged arc, gas metal, tig etc. Welding systems work synchronously with our machine.

... gas (NACE) Design for low temperature down to -50 ° C Design pressure up to 300 bar Customer-specific nozzle arrangement Water jacket design as pressure vessel Water tank vessel for hot water> 100 ° C GENERAL Indirect water bath heaters type VH are heat exchangers (heat exchangers) which can heat the gas decentrally if no hot water treatment (for example a boiler system) is available. The heating of the gas is necessary in order to counteract the Joule-Thomson effect during pressure reduction or to provide a defined gas temperature for the following system components. The most common...