galvanized grilles

... A15 according to EN124:1995, making them suitable for areas frequented by pedestrians and cyclists. Made from galvanized metal sheet or AISI 304 stainless steel, these grates can be ordered in standard or custom sizes to meet specific needs. The square edge grates offer a perfect combination of functionality and design, ensuring efficient drainage while maintaining an elegant appearance. Their...

... be stored in the silo, thus preventing the grain from falling into the ventilation channels. Ventilation grilles are produced entirely from galvanized sheets, so that grains can be stored safely for many years.

...Metal ventilation grilles are a durable and stylish solution for ensuring proper air circulation in your home or office. These grilles are crafted from high-quality metals such as stainless steel or galvanized iron, offering exceptional strength and resistance to corrosion. Their robust construction makes them ideal for both indoor and outdoor use, providing reliable performance in a variety of...

...High-reach diffusers with 3-way air outlet. - Acceptable flow rates from 5,500 to 63,000 m3/h. - Made of galvanized steel painted with oven-dried polyester powder coating in RAL 7035 gray. - Simple deflection grilles with polyamide slats. - Opening adjustment from 0º to 90º. - Option to supply with double deflection grids. - 30mm METU mounting frame.

...Load capacity of 1,000 to 3,000 kg/m2 • Fireproof and non-conductive panels • Modular system 600 x 600mm • Adjustable floor heights • Galvanized steel substructure (pedestals, stringers, lateral braces…) • Grilles or perforated panels for air conditioning circulation • Accessories: steps, ramps, and panel lifts Seismic support: enhances the seismic resistance of the floor in this area...

... solution: The TTW 25000 S Air Circulator This plug-and-play air circulator impresses in both indoor and outdoor applications with its high air output, which can be adjusted in two stages. The robust galvanized steel housing is designed as a trolley, allowing the TTW 25000 S to be easily transported and positioned at the site of use. As a safety feature, the tiltable fan drum is also equipped with protective grilles on both sides. Installation: floor-standing Type: Axial...

... the substrate with mounting brackets. All types of directional changes of the ducts, branches, and ends are made using properly selected fittings such as bends, T-pieces, crosses, and reducers for round ducts or fireplace and ventilation grilles. The entire system is complemented by dampers and air inlets. Material of manufacture: galvanized sheet metal Cross-section: 150x50mm Corner: 90° Weight (kg): 0.4000 Article number: 9005249036521...

...Grill - Galvanized Cast Iron...

... 3000x1500 mm from 1.5 mm, 2 mm, 3 mm thick aluminum (AlMg3), a subsequent powder coating is recommended, from 2 mm, 3 mm thick anodized aluminum (E6EV1), from 1.5 mm, 2 mm thick stainless steel V2A (1.4301), brushed on both sides, from 1.5 mm, 2 mm, 3 mm steel sheet (DC01), a subsequent powder coating is necessary, from 1.5 mm, 2 mm, 3 mm thick galvanized steel sheet (DX51D+Z), a subsequent powder coating is recommended, powder coating in RAL and DB colors is possible Perforation pattern according to our sample examples or according to your ideas. We make it possible. Through...

... p is multiple and at the customer's discretion, as for the types of meshes a x b. AVAILABLE SUPPORTING AND INCLINED BARS From plates 20×2 mm to plates 100×5 mm. EDGING Generally obtained using plates of 35×5 mm or 50×5 mm with holes to allow for quicker assembly. INCLINATION OF BARS: 30° or 45°. MATERIALS Galvanized iron, raw or painted, stainless steel, aluminum, or corten steel. INCLINATION OF BARS: 30° or 45°.

...Gate opens upwards, rolling onto a winding shaft. Roller doors and roller grilles Gate opens upwards, rolling onto a winding shaft. Gate opens upwards, rolling onto a winding shaft Armor available in aluminum or steel (galvanized) Slats available in single-walled or double-walled insulated options Window areas only limited in the form of light cut-outs Various grille shapes available Extremely...

...The new security grille meets the PMR standards NFP98-350 / NFP 98-351. Available in stock, custom manufacturing is possible: in addition to dimensions, various options exist depending on the installation configuration: - raw or galvanized grille - grille with painted nosing - adhesive tape on the smooth part - contrasting riser (paint) - side drilling...

... grating - 2 hinged doors at the front (doors measuring 870 mm, providing an opening of 1760 mm) - a lock with a European cylinder - a hot-dip galvanized base after welding, with sleeves for fork lift access - 4 lifting rings, - 2 high and low side ventilation grilles. The BUNG6MPF storage bungalow is factory assembled and manufactured in France. It comes with a 5-year warranty against manufacturing defects and corrosion (under normal usage conditions).

... industrial applications - in walkways, mezzanines, safety stairs - or as vertical protection for fences, guardrails, and grilles. It is suitable for situations of particular stress, such as the stationary steering of a forklift or heavy vehicle. For this reason, it is mainly used for horizontal applications in the industrial sector where there is a need for high load-bearing capacity. It is supplied either in full sheets (plates) or in custom-sized panels, edged, raw, or hot-dip galvanized.

... Footprint: 89.2 m² Internal area: 84.8 m² Modifications: 4 side walls removed 2 additional ventilation grilles 40 x 40 cm Assembly and sealing of joints Complete repainting, exterior and interior (color of choice / RAL color chart) Layout and equipment: Motorized internal rolling metal curtain (2.5 m x 2.5 m): Galvanized finish Operation by central motor with brake 220 single-phase Internal disengagement in case of power failure Opening/closing via surface-mounted steel key switch...

...Immediate setup without tools. Very stable. Designed for multiple uses. Installation in a 'zig-zag' screen with fasteners 216003 or isolated with universal feet 216002 (below). Robust metal construction, bright galvanized finish. Belt wire Ø 10mm and mesh Ø 5mm - Rectangular mesh 10x30 cm. Feet and fasteners to be ordered separately. See options in the accessory selection. Ref:216008-3...

DOMOTIME was founded in 2005 by specialists in the gate automation sector. It is a MANUFACTURER and/or WHOLESALE DEALER of various accessories related to gate access or similar. Today, Domotime can be defined as a leader in the supply of iron and nylon racks for gates. Related products: rack, steel rack, iron rack, nylon rack, traffic lights, LED traffic lights, traffic signal signage, copy remote...

MALINGUE, a metalworking company based in Ercuis in the Oise region, operates in the fields of locksmithing, metal construction, layout, and the manufacturing of steel, stainless steel, or aluminum structures. Our integrated design office, working with 3D plans, allows us to meet your needs, including in the field of acoustics. We have 5,000 m² of covered buildings equipped for handling heavy load...

... are, of course, also available fully assembled. Individual Parts: - Aluminum slat - Side wall in galvanized steel or aluminum - Plastic seals and sealing rubber - Drive shaft - Gears and end caps - Frame profile - Slat profile - End profile - Corners in aluminum, galvanized steel, stainless steel...

...among other applications. Additionally, we supply galvanized or coated versions manufactured in small and large series, in pre-assembled units that meet specific requirements for tightness, air guidance, material, and aesthetics. Simply ask us for relevant laboratory tests or performance certificates.

... K30. Damper blade made of galvanized steel sheet with internal special insulation, housing and mounting parts made of galvanized steel sheet, bearings made of brass, release opening, and two opposite inspection openings can be used for inspection. Release by fusible alloy at 72°. Housing length: 500 mm, also available in 375 mm.

...A ventilation grille for hanging. Louvers are not yet installed. Hansa Polytechnik manufactures weather protection grilles and ventilation grilles made of aluminum, stainless steel, or galvanized steel for the mechanical supply and exhaust ventilation of rooms in households and commercial settings.

...Metal garage doors, tilting, slatted, equipped with grilles, windows, with wooden paneling, galvanized sheet metal, or perhaps with insulated panels… GIOVIDOORS has been marketing high-quality doors for years, always striving for quality improvement through continuous investments that allow it to seek partners with the most modern production technology. The robustness of the doors is guaranteed...

...grilles that prevent moisture ingress, and a new interface designed to provide a safe, clean, and efficient product. * Compared to Stage IIIA generators Designed and assembled by Aggreko Galvanized alloy steel enclosure with bolted doors and locks Equipment designed to minimize acoustic impact Low fuel level warning sensor in the fuel tank Lifting compartments on the base frame and lifting beam on top Additional 2-point lifting arrangement FUEL TYPE: Diesel or Biodiesel WEIGHT (KG) WITH FUEL: 10650 WEIGHT (KG) WITHOUT FUEL: 8782 WIDTH (M): 1.9 m LENGTH (M): 5.16 m HEIGHT (M): 2.9 m...

... small hole spacings, maximum diameters, and high demands on optical and functional quality, such as speaker grilles for vehicles or filters for automotive applications (oil filters, airbag filters, etc.). The raw materials for our precision perforated sheets are mostly: - Electrolytically galvanized steel sheet, also pre-coated - Aluminum in various alloys, also pre-anodized We provide you with: - High-quality perforated sheets in coils or as sheets - Complete, punched and/or formed parts, including surface treatments such as painting, powder coating, etc...

...Weather protection grilles made of galvanized steel sheet or aluminum extrusions with drip edge Installation in facades, equipment, and ventilation ducts Easy combination with louvered dampers Bird protection grilles made of galvanized wire mesh Surface painted or anodized (aluminum) available Versions: S = Standard with a single-sided connection frame (rib height 40 mm) W = Wall installation with wall anchors K = Duct installation with corner holes Special shapes round, triangular, oval, trapezoidal other shapes are custom-made...

... Custom solutions with GitterStar grilles are also possible. Various designs of grilles: Steel - galvanized, stainless steel V2A, V4A, pickled, color coating according to RAL possible. Screws made of stainless steel V2A Mesh division, e.g., 33x33 mm Further divisions available upon request.

... lock and protected locking rods. - Equipped with 3 shelves (height adjustable in 25 mm increments) and 1 validated floor tray. - Supplied with removable galvanized shelves. - Includes a compartment for documentation. Model: CS 103 Products to store: Polluting liquids Equipment: 3 shelves, 1 floor tray Number of levels: 3 Door version: Swing door Hinges: Bilateral Door version: 2 wings Door color...

... aluminum grilles are visible from the pool side. The casing is made of galvanized steel. All external and internal parts of the casing are coated with powder paint. The evaporator and condenser coils are protected against corrosion by an epoxy coating. The CDP (T) is mounted on the wall using an anchoring bar supplied with the unit. They are fully automatic, ultra-quiet, and controlled by a built-in...

... broader information collection. They are built with an arc detection system, moisture protection grilles, and a new HMI interface, all contributing to a safe, reliable, clean, and efficient product that will benefit your business. * Compared to a Stage IIIA generator Designed and assembled according to Aggreko standards Bolted, galvanized steel container, doors equipped with locks WEIGHT (KG) WITH FUEL: 10650 WEIGHT (KG) WITHOUT FUEL: 8782 WIDTH (M): 1.9m LENGTH (M): 5.16m HEIGHT (M): 2.9m...