frequency transmitters

...Wireless and Bluetooth connectivity combined Wireless operation for two-motor drive systems, double electric bed base: The receiver has a built-in 2.4GHz two-way radio controller, as well as a built-in Bluetooth chip for connecting to Android and iOS devices. It can be combined with 2.4 GHz two-way wireless portable transmitters. The device also has an integrated triple floor lamp, a button for...

... connections to ensure the pressure transmitter can be adapted to local conditions. Features: — Nominal pressures: 0 ... 100 mbar to 0 ... 400 bar — Accuracy: 0.25% FSO — Output signal: digital, i²C — Bus frequency max. 400 kHz — Adjustable formatting of the measurement value — Interrupt output — Excellent temperature behavior — Outstanding long-term stability Optional features: — Pressure connection G 1/2" flush-mounted up to max. 40 bar — Welded pressure sensor — Custom designs...

...This self-calibrating CO2 sensor measures CO2 as well as temperature, relative humidity and ambient light conditions. It needs a 24 VAC supply voltage. This sensor can also directly control an EC-fan, AC fan speed controller or frequency inverter. It has 1 single analogue / modulating output depending on the highest measured value for temperature, humidity or carbon dioxide. If you only want to...

...-port version (MIMO mode) are available for selection. Some of the indoor antennas have an extended frequency of up to 3.8 GHz for future-proofing 5G operation. Purpose of use: WiFi antenna technology suitable for 5G applications.

... (Adjustable time and threshold) Default audio input can be set between transmitter audio input, IP audio or internal audio player Event logging (Notificaton over e-mail, SMS and Onair Service Center) Remote Control over Internet, TCP/IP and Onair Service Center Internal IP Audio Decoder (Shoutcast, Icecast, Mpeg TS, Mpeg2 TS, Flacstream, PCM Stream) 1+1 Redundancy system ready (N+1 Redundancy System on –D Series) Automatically determines the operating parameters for maximum efficiency when frequency or output power is changed A clean start can be made by returning to factory settings ...

...- Wireless installation - Range of up to 50 m - Complete set including mounting materials and battery - Discreet installation of the transmitter - LED status indicator - Multiple transmitters can be learned Technical Data: - Operating voltage: 230 V~ - Operating voltage transmitter: 1x CR 2477 - Switching power: 1800 W - Range: 50 m - Frequency: 433.92 MHz - Dimensions transmitter: 60x30x17 mm - Dimensions receiver: 60x125x90 mm Scope of delivery: - Transmitter - Receiver - Button cell - Housing in brown - Housing in white - Instructions...

... technology. The STOP function is classified up to PL e, SIL 3 (according to EN ISO 13849-1 / EN IEC 62061). LK NEO features 4 LEDs for visualizing the machine status and a data logger for recording remote control operations. It is available with 6, 8, 10, and 12 push buttons. Additionally, there are 2 more versions (6 or 10 buttons) with a customizable 1.8-inch color display. This push-button control can also be used for radio control solutions such as multiple transmitters and/or multiple receivers.

... lighting. The lighting can be turned on and off manually or automatically. The housing of a barrier can contain one or two receivers (transmitters) to eliminate a large number of housings and minimize installation work on the monitored site. The frequency channels allow the sensors to operate reliably when located in close proximity to each other. It is possible to manufacture FORTEZA-FONAR on...

... functions for the setup, testing, and calibration of process instruments including pulse transmitters, measuring converters, measuring instruments/displays, switches, proximity sensors, counters, RTDs, thermocouples, and valve positioners, among others.

...For many years, KUK Group has been a leading manufacturer of customer-specific transformers, chokes and transmitters - both for high frequency (HF) and low frequency (LF). We wind both standard and customer-specific bobbins. In close cooperation with the customer, we develop the best possible transformer or coil for the specific application. At the lowest possible costs. In addition, KUK is...

... - Power supply: 9-16V DC - Quiescent current consumption: 5mA - Maximum current consumption: temporarily up to 5A possible - Operating temperature: -40°C to +85°C - Reception frequency: 433.92 MHz - Switching current: 1x 10A, 2x 5A, 1x 150mA - Many functions programmable Flexible to adapt to many requirements through various wiring options. System range approximately 30-50m (dependent on environment and antennas).

...The radio sensor is compatible with the systems from the IFFS series and operates at a frequency of 868.3 MHz (EU). Connected to a control unit, the sensor receives radio telegrams from the handheld transmitters of the series, evaluates the telegrams, and sends the control data to the control unit. The radio protocol developed by IR-Systeme is virtually eavesdropping-proof due to the application...

... preset vibration level is exceeded or shut down the machine in case of an emergency. — Measurement range 0 … 25.4 mm/s — Output range 4 … 20 mA — Frequency range 3 … 1,000 Hz — 2-pin connection socket on top For a customized offer, please contact us directly.

... Advantages - Pre-wired or not. - Transparent cover for easy diagnostics. - 22 digital outputs. - Safety relays with guided contacts for emergency stop. - Diagnostic LEDs and optional feedback. - Optional graphic LCD screen. - Exclusive automatic frequency change system.

...). The transmitter is designed in accordance with the relevant ITU-R recommendations, ITU radio regulations, and ICAO standards, ensuring high reliability and ease of operation/maintenance. The fully solid-state transmitter minimizes maintenance safely and guarantees a long lifespan and low operating cost compared to conventional transmitters.

... additional permit to operate in this frequency range. Radio channel parameters such as transmitter power, frequency channel number, modulation settings, as well as serial interface settings can be flexibly configured for a specific task of the Customer. PiTract is ideal for working with remote or moving objects. The applied latest LoRa transmission technology provides excellent sensitivity and noise immunity, which allows PiTract to be used in industrial facilities that are in a difficult interference environment.

... electronic circuits. Without limiting the amount of unwanted electromagnetic radiation from electronic products, the electromagnetic spectrum can be adversely affected, and frequency bands reserved for radio transmission can be jeopardized. As the number of both wired and wireless electronic products continues to grow, the pre-packaged electromagnetic spectrum will become even more crowded. Protecting this vital resource is critical to ensure that devices continue to operate properly in the future.

...Horwin CH-V/Ux-x series is a hybrid combiners with ferrite isolators used for combining several VHF/UHF transmitters into one antenna with close frequency spacing. Combiners are configured in sets of 2 or 4 channels. There are two model versions – single or dual ferrite isolators depending on the required Tx – Tx isolation and (or): low power– up to 50 watts and high – up to 100.Nominal...

...Robust key transmitter with external antenna and 15 single-stage buttons. Data feedback – Range – Transmit signal strength – Status of machine function – Custom feedback information upon request LBT frequency search When powered on or when switching frequencies, it is checked whether the used frequency channel is occupied by other transmitters. If this is the case, the next frequency channel is...

... very competitive pricing, value for money – And Professional – Service & Equipment.. RADIO STATION and BROADCASTING EQUIPMENT RADIO TV STATION and BROADCASTING EQUIPMENT – Choice of Transmitter configurations – modular or integrated – Optimising Antenna configurations and frequency combining where necessary. – Extremely reasonable pricing of professional products & services. – Complete and...

... potential separation for automation technology - Analog, digital, and bus communication, HART, PROFIBUS® PA, and FOUNDATION™ Fieldbus communication - The product range includes a wide spectrum of functions within signal processing such as display devices, Ex-barriers, field-mounted Ex-transmitters, frequency/pulse converters, power separators, isolating amplifiers, signal computers, signal converters, power supplies, temperature transmitters, etc. - Device approvals: UL, CSA, FM, ATEX, Marine, SIL, NEPSI, GOST - Dust-Ex and Gas-Ex approvals...

... solutions and have approached emerging technologies, such as RFID (Radio-Frequency Identification), NFC (Near Field Communication), and BLE (Bluetooth Low Energy, also known as Smart Bluetooth). These technologies are strongly linked to the market of smartphones and mobile devices, which are in constant growth and innovation. Thanks to the expertise developed in RFID, NFC, and BLE, we have created...

Genex has been producing microwave coaxial components for civil and military telecommunications since 1977, manufacturing components, RF cables, and waveguide components and lines (from WR430 to WR28) for workstations in research and development laboratories, as well as for terrestrial, naval, and avionics installations using CNC machinery. The 'Made in Italy' quality is guaranteed throughout the ...

SENSING LABS develops a remote communicating sensor network that seamlessly integrates into the standardized world of the Internet. These sensors incorporate disruptive radio frequency technologies, significantly increasing their range (10 to 15 km) compared to traditional solutions, which simplifies the construction of data collection networks. Furthermore, these sensors are opening up to the...

...Founded in 1969, LEXTRONIC specializes in mail-order sales of electronic equipment. LEXTRONIC's business activities revolve around four main areas: the distribution of development tools for microcontrollers, the distribution of radio frequency modules, the distribution of intrusion detection and video surveillance equipment, and the distribution of electronic equipment. This human-sized structure...

The Innovationszentrum für Telekommunikationstechnik GmbH IZT specializes in state-of-the-art digital signal processing and FPGA design for radio frequency and microwave technology. The product range includes devices for signal generation and signal acquisition, transmitters and receivers for digital broadcasting systems, microwave systems, and channel simulators. In the area of high signal...