variable speed drive France

... Controlled by a variable speed drive, the AER-GS can operate in aeration and mixing mode or in mixing mode only (without air supply). Therefore, the AER-GS is ideal for applications with intermittent operation such as SBR and in basins with nitrification/denitrification sequences. As an alternative to fine bubble aeration using membrane diffusers, the AER-GS aerator/mixer has a consistent performance over time, is less sensitive to the presence of fibrous materials, and is easy to maintain.

... simultaneously, or a single pressing roller to be used as single lane peelers. Features: - Single lane machine (V1588S) or double lane (V1588) - Shine plates to optimize yield - Adjustable cutting thickness via the handwheel - Ready to use: already configured - Easy to assemble/disassemble - Easy to clean and move - Conveyor mode - 100% stainless steel Options: Eco'o system sensor to reduce water consumption Variable speed drive Central separation of fillets Custom integration possible Cutting width: 320mm Width: 770mm Height: 1265mm Length: 1900mm Power: 1.2Kw...

... find here Hammered paint Indoor use PLATON S range Triple mesh reinforcement Variable speed up to 2 rpm at 50 Hz Three-phase 230 power supply not included Ref: PLAS5R3 Load capacity: 2500 kg Ø Rotating part: 5000 mm Ø Base part: 4500 mm Height: 220 mm Diameter: 5000 mm...

...TECHNICAL SPECIFICATIONS - Peristaltic pump - Model: AS100 - Italian brand MORI - Pump body: monobloc cast aluminum - Tube: neoprene (other materials available upon request) - Rollers: stainless steel - Self-priming - Dry operation - Variable speed drive - Flow reversal - Automatic pressure switch - Kw 3.0 / V. 380 - Speed: from 7 to 60 rpm - Flow rate: from 10 to 110 HL/h - Maximum pressure: 2.5...

...The advantage of equipping your electrical cabinet with a frequency inverter is the ability to achieve energy savings. This electronic device allows for the control of an electric motor's speed, thereby reducing its consumption. Our electrical cabinets can be equipped with speed controllers (upon request).

... chain conveyor is made of stainless steel 316, 316 L, or 304. This transporter can operate in 1 or 2 directions. Both models feature a direct drive motor reducer, hollow shaft type. The power supply is 380 V TRI (other voltages are available upon request). These conveyors are available in fixed or variable speed according to your needs. Their stainless steel legs for height adjustment are available in increments of 50 mm.

...Efa is an expert in the field of electric drive systems. We support our clients in electric traction projects. We also provide electric motors for pumping activities. Our process is straightforward: we size the motor, the gear motor, and the variable speed drive. Then, in accordance with the client's needs, we carry out the integration and adjustments, offering a complete solution from the...

... drive for the back stop (back stop movement speed: 53 mm/s). Electronic knurled button for variable speed movement, from 'slow' to 'fast' for the back stop. Touch control screen for adjusting the back stop: Multi-language menus; digital display of dimensions in mm/inches (precision to 1/10 mm);...

...Electric heating mixer-cooker for caramel and jams - CBTE070 - 70 liters useful mixer-cooker, for cooking up to 220°C, for the production of caramel, jams, and cooking creams. Equipped with a mixing arm with scrapers on a variable speed drive that can rotate in both directions, electrically tilting tank, double temperature probe system, touch screen. 304 L stainless steel construction Ease of...

... Transmission HST (continuously variable) Number of Blades 1 blade + 2 knives Minimum Turning Radius 1.8 Starting Electric Engine Displacement 653 Type of Engine 4-stroke, Air-Cooled V-Twin Brakes Submerged Dimensions (LxWxH) 1998x1085x940 Rear Tires 17×8.00-8 (4PR) Average Yield 7300 Auxiliary Transmission Constant Take-off Forward Speed Fast 0 to 13.8, Slow 0 to 7.7 Type of Ejection Mulching, With Collection + Mulching + Rear Ejection, Side Ejection [Button id="1"] SKU:1254854...

...The high-speed ejection module (HPD) is designed for ejecting goods, preferably with a smooth bottom, at various angles (variable to the degree) to the right or left in a lateral section. The HPD module is available in two operating modes: • HPD 24 V Master, utilizing 24 V motors for traction and oscillating drive • HPD 400 V Master, where the traction drive is used by the flat belt conveyor and the oscillating drive operates on its own 24 V motor Depending on the product being transported, an HPD module can include several cassettes, each measuring 120 mm.

... motor, power 2.2 kW, cutting speeds from 20 to 120 m/min. Variable speed drive. Sawing arm descent via hydraulic cylinder (progressively adjustable). Force sensor on the guiding arm to limit descent speed when the blade encounters wider sections (or harder materials). Sawing arm elevation via hydraulic cylinder. Large stroke hydraulic vice that can move left and right. Self-clamping vice jaws. Cutting angle indication on a graduated sector located at the front, near the lever of...

...Used condensing unit R134a PROFROID in very good condition. Composed of 4 BITZER compressors, one of which is on a variable speed drive. Item code: GC10036 Brand: PROFROID Reference/Type: GCV R4SH 4DES05 4MS Power: 32 kW Evaporating T°: -10°C Ambient T°: +32°C Refrigerant: R134a Year: 2013 Voltage: 400V/3ph+N/50Hz Dimensions: 4160*1200*1250 mm Weight: 1930 kg In stock: 1...

... sheltered environments or very low voltage control (single speed or with variable speed drive) ensuring user protection against electrical hazards. Compliant with the Machinery Directive 2006/42/EC. Developed and designed according to the NF EN 14492-1 standard.

...High-Efficiency Circulator High-energy efficiency circulator with a synchronous permanent magnet motor controlled by an integrated variable speed drive. Flow H Max kW 0 to 4.2 0.2 to 6.8 3 to 56 W mc/h m kW • Liquid temperature from +2 °C to +110 °C • Ambient temperature from 0 °C to +40 °C • Maximum pressure: 10 bars • Storage: -20°C / +70°C, relative humidity 95% at +40 °C • Markings...

... Blade speed: 28.5 m/sec. Required flow rate for the suction system: 3840 m3/h Compressed air consumption: 60 Lt./min Operating pressure: 6 – 8 bar Net weight: 880 kg Height of drive roller: 50 mm Diameter of drive roller: 200 mm Standard towing rollers: 2 Standard square roller height: 300 mm Square roller length: 600 mm Square roller tilt: 0 to 45° RPM Max opening rollers: 200 m/sec Max opening square blade: 420 mm Motor power: 0.37 kW Variable feed speed: 0-30 m/min Compressed air consumption: 30 Lt/min. Operating pressure: 3-6 bar Net weight: 180 kg...

...The BMSY-810-C MG Tronzadoras semi-automatic double column band saw is powered by a 4.5 kW motor with a variable speed drive ranging from 20 to 100 meters per minute and a fully enclosed gearbox. The models in the BMSY range can handle most materials. Blade guides with bearings and carbide pads provide precise guidance for the blade, especially for these models with 2-degree blades. These saws...

... 1,000 kg/hour - High capacity separator: up to 2,500 kg/hour - Very high capacity separator: up to 3,500 kg/hour Overall dimensions Medium capacity: 1.2m wide x 3.5m long Tank Medium capacity: 400 liters (recommended) Motor Medium capacity: Variable speed drive Overall dimensions High capacity: 1.5m wide x 4.5m long Tank High capacity: 800 liters (recommended) Power supply: Single-phase 240V / 50 Hz (European standard) Water supply: A hose connected to a tap is sufficient Wastewater: Adapter to female 1" tap...

...Description and Features - Made of Stainless Steel 304L - 2 water heating options: electric or steam - Continuous washing - Washing zone and rinsing zone with temperature control system - Drive of the boxes with variable speed - Highly efficient filtration system - Adjustable jet from high-pressure washing nozzles - Chain conveyor with stop For food, pharmaceutical, chemical, and cosmetic industries...

...MOTORIZED HYDRAULIC ROLLER Very popular for rolling light stainless steel sheets into round tubes, variable radius tubes, and cones. hydraulic drive for the clamping and lateral rollers for orbital upward and downward movements top roller driven by a hydraulic motor coupled with a planetary gear hydraulic pivoting head for removing parts after rolling all operations are controlled from the mobile...

...* Hot-dip galvanized chassis, powder polyurethane paint. * Stainless steel fasteners * Horizontal pre-wash with high-pressure rotating nozzles * Side high pressure in two positions * Covering casing for high-pressure pipes * Safety system for controlling the loosening of belts on horizontal elements * Direct drive with variable speed * Horizontal brush and drying nozzle with electric motor driven...

...Test bench for the development of new generations of aircraft engine compressors, including the entire electromechanical drive system (Variable speed motor, speed multiplier, lubrication unit) as well as the control and monitoring systems (frequency converter, temperature and vibration monitoring)...

...The Universal Laboratory Grinder (FNG00) is the smallest grinder in the FNG range. Machined from solid material and constructed from welded 316L stainless steel, it is designed for small laboratory grinding setups. The F00 has been designed to be installed on a workbench. The motor and transmission of this grinder are fully enclosed. Smaller and more compact, it still possesses the same features as a New Generation Forplex grinder: variable speed drive, easy plate change, etc.

...SICAR - Used molding machine type PRIMA /S/P5 - 5 tool holders including universal - Capacity 230 x 160 mm - Planer 7.5 HP - Right spindle 7.5 HP - Left spindle 7.5 HP - Thicknesser 7.5 HP - Universal 5.5 HP - Drive 4 HP - Variable speed feed - SIKO counter on all axes - Infeed table 2.30 m - Automatic lubrication...

...The reliability and consistency of magnetic coupling gear pumps, a packaged set (pump, motor, variable speed drive with control) and pre-programmed, with remote control and software provided. A simple and practical solution for all dosing, transferring, and regulation needs that require precision. The ideal equipment for laboratories, testing, and simulations.

... (-200°C to +1200°C) + Fire fighting equipment + Filtration + Compressed air ELECTRIC + Electrical transformers (50kVA to 25MVA, copper, aluminium, dry or oil...) + Generators (10kVA to 3300kVA) + Cells + LV / MV / HV material + Low current + Variable speed drive, industrial electromechanical ENGINES + MACHINES + Lifting and handling equipment (hoists, winches, rope, cables, nacelles, etc.) + Used...

... Leroy-Somer products is a valued characteristic for these applications. Leroy-Somer is the world leader in alternators and one of the global leaders in drive systems (asynchronous motors, synchronous permanent magnet motors, direct current, gear motors, variable speed drives, and electronic starters, etc.). Leveraging expertise and continuous innovation, the company designs and provides the most efficient drive and energy generation solutions.

...From the reception of raw materials to packaging, including the stages of extraction/purification, crystallization/evaporation, and centrifugation. LEROY-SOMER designs drive solutions that cover all the needs of the sugar industry process: fixed and variable speed motors, gear motors, and variable frequency drives. Leroy-Somer, part of the Emerson group, is the world's number one in alternators and one of the global leaders in drive systems.

The company SM CYCLO FRANCE specializes in the manufacturing and maintenance of gear reducers, gearmotors, transmissions, and precision reducers for robotics. Its offerings include, among others: - Speed variators for industrial mechanical transmissions, - Speed reducers for industrial transmissions, - Variable speed reducers. The German company was fully acquired in 1994 by Sumitomo Heavy...

...Leroy-Somer is the world leader in alternators and one of the global leaders in drive systems (asynchronous motors, synchronous permanent magnet motors, direct current motors, gear motors, variable speed drives, and electronic starters...). Leveraging expertise and continuous innovation, the company designs and provides the most efficient drive and energy generation solutions to enhance its clients' competitiveness and reduce electricity consumption.