plastic system France

...Various / Sundries - PSPN system - PSPN system - PSPN plastic fixture...

... width with or without hot melt: from 330 to 700 mm Overlay thickness: from 0.03 to 0.8 mm Lateral alignment of tracks: ± 0.15 mm Material type: PVC material (Roll to sheet. Roll to roll) Feeding system: none Roller width: 250-700 mm Material thickness: 0.04-0.2 mm...

... the most demanding applications. Technique:electromagnetic, indent, dot peen, impact Material:metal, plastic, aluminum, for hardened materials, brass, for stainless steel Configuration:for data matrix, tubes, industrial, plates, pipe, bearings, large parts, cylindrical parts, bars... Other characteristics:traceability, pneumatic, deep marking, deep, with touch screen, in-line, electropneumatic... X travel:200 mm (8 in) Y travel:50 mm (2 in)...

... used as individual pivoting panels or lids. The opening panels feature a locking system in the vertical position to keep hands free for handling the elastic cord bag support system. We also offer options such as metal inserts or separation kits that facilitate the separate collection of multiple streams as well as easier bag emptying. Height: 851 mm Length: 956 mm Depth: 430 mm Weight: 15.3 kg Capacity: 160 liters (2 x 80 liters)...

... logistics system will facilitate the transport of wrapped plastic bales. Describe the project in a general way while going into more detail: 4 belt conveyors 1 hydraulic turning clamp 1 hydraulic power unit A safety system to lock the area (interlocked doors) Electrical cabinet and system...

... system using a vibrating motor. A GCS fan suction turbine is included in this suction unit. Coupled with a 2-pole motor (3000 rpm), it provides a generous pressure drop at the required flow rate. These plastic bag filters comply with CE and IE2 standards. Brand: Aspirelec...

...The bag filters used in our centralized industrial vacuum systems are suitable for almost all dry separation applications, primarily aimed at companies in wood, plastic, and paper machining. Safe separation of dust is ensured with our modular industrial vacuum systems ranging from 8,000 m³/h to over 300,000 m³/h. Indeed, they are adaptable and can be expanded at any time according to needs.

...Flange plate, piston and body rust-resistant, bright. Screws electro zinc-plated. Collet red or clear anodised. Note: Machinable collet system with base plate for mounting on 50mm pitch grid plates. The flange plate can be used for external or internal clamping collets. The contour of the workpiece to be clamped is machined into the collet. Free-form and asymmetrical contours can be clamped. The...

... available in 2 series: 2RT or 3RT, depending on the number of mold plates. Equipped with a 4-column closing system with high precision parallelism, their adjustable opening stroke allows for different mold heights. The vacuum bell system reduces vulcanization time, thereby increasing productivity.

... for users. All our glove boxes are equipped with an autonomous and adjustable negative pressure ventilation system with simple or double THE filtration, a set of standard glove ports, with neoprene gloves or other materials, and LED lighting.

...Complete range of filters for all equipment and machines used in industrial sectors. Machine tools, filter bands Cutting oils and emulsions Plastic injection Electroerosion Vacuums and sweepers...

... series. The plastic material (e.g., PP, PE, ABS...) is presented in the form of pellets in the hopper. It is heated inside the barrel and then mixed by a screw: this is the plasticization step. Following this operation, the viscous material is pushed into the mold by a piston: this is the injection. For the material to solidify, it is necessary to thermoregulate the mold. The molded part can then be ejected after the mold is opened using an ejection system.

... is cleaned directly, which is more accessible). Equipped with a piston pump or gear pump depending on your products and needs, the K-Dense dosing table can fill a variety of formats of glass containers with twist-off caps or plastic containers with large openings (150g, 200g, 250g, 500g, etc.) with thick, pasty, or semi-dense products (jam, honey, maple syrup, sauces, mustard, spreads, paste, terrine, etc.).

...Automatic plastic bottle 500 ml anti-g system - PAW PATROL - LUNCH SECTION: BOYS FAMILY: LUNCH PACKAGING: 72 SEASON: PER20S EAN: 3760303160197 DIMENSION: 53*53*39cm PACKAGE WEIGHT: 8...

...fatigue, migraines, rheumatism, and even cellulite. The Hijama cup set includes 24 plastic cups: 6.8 cm-5pcs, 6 cm-5pcs, 5 cm-5pcs, 4.3 cm-5pcs, 3.4 cm-2pcs, and 3 cm-2pcs, along with a hand pump and extension tube.

... Technomark. The Easy marking machine is available in two window sizes: 120*60mm and 60*30mm. Technology: Micro-percussion Marking Window: 60 x 30 mm and 120 x 60 mm Connectivity: 3 USB ports and 1 Ethernet port Options: Controller supports, playback system, software licenses... Industries: Metallurgy, aerospace, automotive...

...Filters made of synthetic fiber or fiberglass pockets assembled together and fixed in a double-edged steel or plastic frame. The pocket system increases the filtering surface, thus extending the filter's lifespan while reducing pressure drop compared to flat or pleated media. Filtration classes according to European standard EN 779 G3 to F9 Information Standard or custom dimensions available upon request. Pocket depths: 300 to 650mm...

... completely dry, FINEX SYSTEM can be covered with all types of paint, watertightness system, plaster- or cement-based fillers, and silicate, epoxy or polyurethane paint. TECHNICAL CHARACTERISTICS • Grain size : fine • Adhesion : complies with standard DTU 42.1 • pH : 9 once dry • Setting starts after 50 minutes • Setting ends in 1 hr 10 min PREPARATION OF SURFACES BEFORE APPLICATION The substrate must be clean, dry, free of dust and of any trace of stripping oil. Walls that are peeling off must be scraped beforehand. Strip any old paint in poor condition and remove any old thick plastic covering.

...Applications and projects : conveyor systems assembly lines robotic units screwing welding Poka-Yoke vision Pick and Place Some practical examples : roll-forming machine conveyor system with elevator assembly lines for plastic and metal components ergonomic workstation on assembly line unit for recovery, transfer and removal of springs on assembly line...

...Based on the highly reliable Twist Pin contact technology - Operating temperature: from -55°C to 200°C. - Metric thread version for space saving. - Three lug bayonet version for quick connect/ disconnect. - Triple start thread (anti-decoupling) version: highly vibration-proof ratchet system. - Breakaway version for quick connect/disconnect. - Plastic shells: easy to use, very small and lightweight. - A large range of panel mount configuration...

...Knee pockets Side elastics and belt loops Zipper and plastic button Two classic cut pockets at the front One side pocket with Lock System A tape measure holder and a smartphone holder Two back pockets, one open and one with flap and Velcro Reflective piping on the back pocket Composition: 65% polyester + 35% cotton Appearance: TWILL MECHANICAL STRETCH Weight: 265 GR/MQ Packaging: 1/20 Color: black Weight: 265 GR/MQ Appearance: TWILL MECHANICAL STRETCH Composition: 65% polyester + 35% cotton Color: black...

...This robust and aesthetically pleasing machine, which integrates a dual punching system, allows for binding up to 500 sheets at once with excellent finishing quality and accommodates large paper formats. Punching holes: Rectangular (3 x 8 mm) for round binders Punching capacity: 25 sheets of 80 g or 2 sheets of PVC 0.20 mm Binding capacity: 500 sheets of 80 g (51 mm) Number of punches: Plastic...

...Thanks to the clip system, you simply push the head and reclip a new one. By using these rechargeable toothbrushes with a clip system, plastic waste is reduced by 8 times: only 8 grams of plastic are thrown away per year, which is less than a single disposable toothbrush.

... a suction unit complete the system. ACTIVE LENGTH: Upon request SUCTION BOX: Thermolacquered blue sheet metal Stainless steel 304 L (optional) VACUUM: 2 blowing tubes BLOWING TUBES: From our range HIGH VOLTAGE GENERATOR: From our range GUIDANCE: 4 metal drum guiding rollers CABLE LINK TO GENERATOR: Set delivered with 3 meters of high-voltage shielded cables. (Other lengths upon request) POWER SUPPLY VOLTAGE: 5 KV in alternating current (AC) MAXIMUM CURRENT INTENSITY AT EACH POINT: 12µA MAXIMUM ENERGY AT EACH POINT: 82 µjoules MAXIMUM OPERATING TEMPERATURE: 60°C...

... steel, aluminum, brass, plastic. Cam-operated lathes, multi-spindle lathes, CNC lathes. Surface treatment, anodizing, grinding, polishing, assembly of subassemblies. From small to very large series. In bar from Ø 2 to Ø 65 mm and in billets up to Ø 150 mm on CNC lathes.

...PP box consisting of a tank, a lid, and a single-handed opening/closing trap, provisional and permanent with an tamper-proof system. The lid is equipped with a safety gutter; it has a large oval opening (approximately 90 x 45mm), and needle detachment caps. Dimensions: 190 x 133 x (h)389 mm Weight: 488 gr Material: PP Filling volume: 8 L Colors: yellow and white Resistances: Perforation and drop Standards: Compliant with NF EN ISO 23907, NF X30 511, NF 302 and ADR UN Features: Provisional and permanent closures and...

...In the context of storing certain liquids (fertilizers, effluents, chemicals, etc.), it is necessary to have a safety retention system in case the storage solution leaks. The goal is to prevent the leaking liquid from polluting the soil and entering the natural environment.

...An innovative system that allows you to lock and detach without any magnets and with unparalleled security! Specifically designed to combat theft using magnets that thieves bring into stores, this tool works with both 12 mm and 25 mm security tags.

... used for very low mechanical resistance. Junction made on site (with tool) Belts may be spliced and welded on site by using a specific tool according to the splicing and welding procedure. With mechanical fastening system ERO Joint® you will reduce considerably costs, particularly for belts with high dimension and belts with tensile reinforcement. Thanks to this new lacing technology, production costs are significantly reduce and the downtime too.

... features a large 10-inch touchscreen covered with a hard plastic casing, making it the ideal diagnostic tool for use in workshops, garages, or dealerships. Ultra is equipped with a state-of-the-art ultra-fast processor, Bluetooth connectivity for wireless diagnostics, and Wi-Fi connectivity for autonomous updates without needing to connect to a computer.