standard screws France

The company TREX was founded over 60 years ago. Specializing in screw machining and cold forging in the field of fasteners. Beyond our reputation in screw manufacturing, we have forged a service-oriented culture, placing quality, proximity, and FRANCAISE manufacturing at the heart of our values. With a vast stock of screws and raw materials, we offer exceptional flexibility, supported by our stro...

...Standard and custom osteosynthesis screws sold sterile and non-sterile. Design, manufacturing, and trading of orthopedic implants as well as various surgical materials. To better meet the needs of our clients, we consider all requests regarding specific products.

...Thanks to its lever and compact size, you can easily carry and use this RED lever hoist in tight spaces without any effort. Significant lifespan and minimal maintenance due to high-quality machining Reinforced safety latch Non-slip handwheel Automatic brake under a closed casing Rubber handle secured with screws Easy handling thanks to its small lever size and lightweight design Easy brake release, particularly useful when the hoist is used to tension loads Handwheel for quick chain advancement Aluminum casing Standard lift: 1m SWL: 0.75 T, 1.5 T, 3 T, 6 T, 9 T Length: 1.5m, 3m, 6m...

...Thermoplastic. DIN 7984 screws and DIN 985 nuts steel. Version: Black. Screws and nuts electro zinc-plated. Note: The standard size for round tubes is Ø18 mm or Ø30 mm. Use reducer sleeves 29042 if smaller tubes are to be clamped or a conversion from round to square tubes is required. On request: Plastic levers for locking. Accessory: - Reducer sleeves 29042 - Round and square tubes 29050 Reference:29000...

...Stainless A1, Stainless A4, Stainless A4-80, Stainless A4L-100. Explore more round head screws in our range of metal screws - stainless steel A2. Material: Stainless A2 Diameters: 3 mm to 8 mm Length: 5 mm to 100 mm Standard: NF E 25-129 Head shape: Round Drive type: Slotted Thread type: Metric...

...Cylindrical Head Screw with Large Six Lobes Form C (TCL TORX) Stainless Steel A2 - ISO 14585 There is a variant in Stainless Steel A4 for aluminum fixation only with a diameter of 3.9: this diameter refers to the DIN standard (not ISO) Model: 62407...

...Self-tapping screws for plastics, various types Various head and drive shapes. Different dimensions and lengths. Standard versions in steel and stainless steel. Various coatings. Short delivery times.

...domed countersunk head, round head), Z cross-recessed countersunk screws, fine pitch. Nuts, washers, threaded rods, hex nuts, lock nuts, washers, cylindrical pins, threaded pins, etc. The quality of Service and the internal Organization of the Company are defined at SVBI by the ISO 9002 standard. As for product quality, it is defined by the ISO 898 standard.

... and complies with the ASME B107.4-2005 standard. Work comfort: The ergonomic rubber handle ensures user comfort. It absorbs vibrations and protects against the sensation of cold. An integrated silencer in the tool's handle body reduces the noise level at the exhaust.

... insulation capacity coefficient. The closer the coefficient is to 0, the less energy is lost. COMPOSITION AND APPEARANCE Insulation: Polyester wadding 260 mm, density 25 Kg/m3. COMPLIES WITH NF-EN 13829. USAGE PRECAUTIONS 1) Allow for an opening in the ceiling for the R8 hatch, minimum dimensions: 542*542 mm. 2) Fix the 4 legs into the wooden frame using TRPF SCREWS. 3) Position the insulation (height 260 mm) to ensure optimal insulation. 4) Install the riser on the attic side to retain blown wool flakes, if necessary. 5) Closure...

... formats on a table with 2 anti-static devices positioned before the guillotine and before the table User-friendly touch screen control, multilingual (French and/or English), setting of your cuts and various counts Use of standardized electrical, hydraulic, and pneumatic components Protective covers for strict compliance with C.E standards Number of tracks: from 8 to 10 Standard width of magnetic...

... and provides a guiding length comparable to an H. For environments requiring an anti-corrosion version, steel parts can be supplied in stainless steel (columns, rod coupling, screws), while the body and plate remain in anodized aluminum (suffix /AC after the reference). Any special stroke is achievable, with a maximum stroke of 200 mm. Cylinder Ø: Ø8/10 Guiding column Ø: Ø8 Cylinder standard: ISO 6432...

... AironeLight version – Roof tube made of round steel 60/2mm – Stainless steel screws Cover: We offer 3 types of covers on our standard pagodas... Galvanized steel frame: • Galvanized steel frame 19 colors of lacquer: • 19 colors of lacquer Flame-retardant PVC coating M2 of 650g/m²: • Flame-retardant PVC coating M2 of 650g/m² 17 colors of fabrics: • 17 colors of fabrics Stainless steel bolts: • Stainless steel bolts...

...Flat magnet with screw housing MATERIAL - Body made of zinc-coated steel. - Magnet made of hard ferrite, samarium-cobalt (SmCo), or neodymium-iron-boron (NdFeB). USAGE - Maximum operating temperature: 200°C for ferrite, 280°C for samarium-cobalt, and 80°C for neodymium-iron-boron. - To avoid damaging the magnetic properties, the fixing screws must be made of a non-magnetic material. See technical specifications.

...Hinges opening to the right or left, with offset body. Standard colors are gray or black. Stainless steel AISI 304 pin and fixing screws included in the supply. The hinge consists of two bodies of different dimensions (one wide body and one narrow body) for use on structures with thin frame or gate thicknesses. The hinge is supplied disassembled to facilitate assembly. Rotation angle (approximate value) Max 185° (-5° and +180° being 0° the condition of coplanarity of the hinge surfaces).

...for example, before your water softener. Our products are manufactured in France and comply with ACS standards, ensuring food-grade quality. The dimensions are standard for a 9"3/4 water filter cartridge, with a length of approximately 248 mm. For reference: 1" (1 inch) = 25.4mm. The filter holder comes with a mounting/dismantling key, a mounting bracket with 2 screws, and 2 male-male brass nipples 20/27 for simple and quick installation. The 20µm sediment cartridge is also included.

... L. Made of steel + insulation according to DIN 4102 + high-pressure laminate (HPL) interior. 2 doors equipped with an open-hold mechanism that automatically closes in case of fire (thermofusible ≥ 50°C). Key lock. 2 shelves. Grounding screws, leveling feet. Hazard pictograms. External dimensions (H x W x D) 131.5 x 119 x 59.8 cm.

...MS53BA2 is a combination of the rigid articulated arm MS53B and a flat base that allows MS53B to be secured on a table. The flat base is suitable for situations where standard clamps cannot be used to stabilize MS53B on a stable surface. The flexible arm can be moved and adjusted by tightening screws and clamps (quick tightening) for positioning based on the area you wish to examine. Two of these...

... 10 mm. Sold in a standard length of 1 linear meter. These applications are validated by classification reports and test reports from EFECTIS. Also suitable for the construction of ceilings in horizontal, vertical, and sloped configurations to achieve fire resistance ratings (SF/CF) of up to 1 hour under wooden floors with direct or suspended fixation. Allows for fire protection of steel structures for stability ratings ranging from R30 to R180.

...Our product range consists of over 1,000,000 items for industrial production, maintenance, and upkeep. Fasteners: our roots, our passion... But we can offer you much more than just screws and nuts. Here is a selection of product groups available in our standard range to give you an overview of its breadth: - Screws, nuts, washers, - Threaded rods, - Pins, - Lag screws, - Fittings, - Rivets, - Clamps, - Anchors and fastening devices, - Studs, - Caps and plastic parts.

...RAIL AND ON-RAIL HANDLING SPECIALIST FIXING RAIL ACCESSORIES The various fixing rail accessories are : standard and adjustable clips, sleeper screws, anchorage bolts and fishplates. The clips are used to fix on steel or on concrete. They can be adjustable, to bolt or to weld. The sleeper screws and anchorage bolts allow the fixing of the rail on plates of all types. And the fishplates allow the...

... derivatives USING A HIGH-PRESSURE FOCUSING HEAD, IT IS ALSO POSSIBLE TO CUT: . Mild steel with a thickness of 4 mm with 300W, 6 mm with 600W . Stainless steel with a thickness of 1.5 mm with 350W, 3 mm with 600W Fast, rigid, and precise equipment, available in three standard formats Travel in mm X Y Z MECALASE ML 3015 3050 1510 195 MECALASE ML 3020 3050 2020 195 TECHNOLOGY . Transmission via 4 ball screws (2 on the X axis), motorized Z axis . Motorization: 4 DC servomotors . Guides...

...Brass or Nickel-Plated Finish Diameter 30mm - Height 22mm BLISTER TFB Screws 6x50 Brass or Nickel-Plated Brass 234 02560 234 02561 5 cards BLISTER/4 Bumpers TFB Screws 6x50 Brass or Nickel-Plated Finish 234 02296 234 02297 5 cards BULK TFB Screws 6x50 Brass or Nickel-Plated Finish 096 02560 096 02561 Pack/10 Spacer H 11mm Polished Brass Finish 096 02243 Pack/10 LARGE BULK without screws Brass or Nickel-Plated Finish 889 02560 889 02561 Carton 300 TFB Screws 6x50 Brass or Nickel-Plated Finish 889 02660 889 02661 Carton 300 Spacer H 11mm Polished Brass Finish 889 02243 Pack/100...

...antibacterial elastomer (SEBS) (>99% of bacteria such as E. Coli, staphylococcus...). Fire rating. Use: 90° opening door. This device is fixed to the outside of the door (facing us when we push the door). Width: 170 mm. Number of bellows: 7. Height: 1.40 m. On request, height: 2.05 m. Available colors: white, beige, gray, black. Manufacturer's warranty: 10 years against tearing. Sold individually with wood screws and rail. On request, the seal and rail can be sold separately.

... perfectly tailored to your needs. 100% compliant with standard EN15312 +A1 Posts: Construction steel, diameter 88.9 mm, thickness 3 mm Anti-corrosion treatment: Hot-dip galvanization Surface: Raw or powder-coated Screws: Stainless steel, simple diameter (10 mm), anti-theft and anti-vandalism HPL panels: Outdoor quality - thickness 13 mm, anti-UV and anti-graffiti treatment...

... in various qualities. Our socket head screws are primarily used for mechanical applications that require high torque. These screws often have a head that is recessed into a countersink or a milling. Available in different materials. If you are looking for screws with specific characteristics, we will suggest the appropriate tool for using your screws or nuts whenever possible, or the most efficient alternative screw solution. Contact us for your custom executions based on your plans.

... an Android control console can manage up to 16 modules, totaling several hundred lockers. The GSI DRIVE range allows for the combination of lockers for ambient, fresh, and frozen products. The modularity and wide selection of standard or custom-made lockers will enable you to adapt your installation according to the needs of your business. External dimensions (mm): (L): 1220 x (D): 300 x (H...

.../m3. Door thickness 51 mm. FRAME Galvanized steel with reduced thermal conductivity, 1.5 mm thickness. DOOR FRAME Surface-mounted (CT1) to be screwed with dowels and screws 8x100mm. To be sealed: Cold-rolled steel anchoring brackets 230 x 1.5 mm foldable on the surface-mounted frame. ________ STANDARD ACCESSORIES / FINISHES ________ 2 Steel hinges of 3 mm thickness. Fixed to the panel with M6x16 zinc-plated screws and to the frame by welding. Brass cylinder 40x40mm, supplied with 3 keys. Handles, anti-catch. Steel core. Certified to DIN 18273 standard.

...Inspection ladder or platform. Hydraulic support leg with hand pump. Two-speed control box operated by cable (22 and 32 rpm). Front transmission via standard or wide-angle drive shaft. Conical or flat anti-overflow ring. Stainless steel bilateral distribution conveyor at the front or rear (width 750 mm or 900 mm). Hydraulic conveyor offset to the right and/or left from 200 mm to 250 mm. Front or rear distribution hatch. Gooseneck conveyor with hatch. Hydraulic brake + parking brake. Rear fire bar. 2 hydraulic counter knives, length = 600 mm on 10, 12, 17, and 20...

...CNC thread milling machine for medium and long screws and for double screws for extruders and injection molds. This model can be manufactured with a maximum machining length of 8000 mm. The maximum spindle diameter is 350 mm. There is an option to mount a special head for longer screws. This machine has a standard milling head with hydraulic ISO50 clamping for end milling. Optional: auxiliary head for cutting tools, tool changer. The SAPOVITE program can be used to facilitate machining programming.