motor protection France

...Product function: Circuit breaker Device function: Motor Pole description: 3P Network type: AC Usage category: AC-3 compliant with IEC 60947-4-1A compliant with IEC 60947-2 Network frequency: 50/60 Hz compliant with IEC 60947-2 Trigger rating: 18 A Trigger technology: Magnetic Magnetic trip current: 223 A...

...It has become more practical thanks to the mobile lifting and pulling arms installed between the pulling blades. On our H4350 model, the tank lifting arms are designed as parallel arms, allowing the tank to reach a discharge height of 420 cm while the angle with the ground does not exceed 30°. This enables faster unloading of the tank. Additionally, a double hydraulic motor (pump) has been used on our H4350 model to facilitate quicker unloading with greater efficiency during the discharge process.

... protection, management, and analysis of a pump's operation. In case of malfunction, it alerts and/or stops the pump. It can be adapted to any type of pump, whether centrifugal, turbine, vane, eccentric disc, eccentric screw, lobe, gear, submerged rotor, magnetic drive, mechanical seal, etc. Pumps are exposed to foreseeable risks that can be eliminated, particularly due to non-compliance with the flow/pressure operating range specified by the manufacturer.

...Features of the new Mercury engine: Mercury 350 HP VERADO V10 Brand: Mercury Model: 350 HP VERADO V10 Power: 350 HP Fuel: Gasoline Type: V10 Displacement: 349 CID / 5.7 Starting: Electric start with SmartStart protection Steering: Electrohydraulic power steering Joystick Piloting for Outboards Shaft length: 20 in (508mm), 25 in (635mm), 30 in (762mm), 35 in (889mm) Gear ratio: 2.08:1 TRIM system...

... electrical interlocks, etc. machine guarding: stainless steel, steel, etc. Immaterial protection equipment: photoelectric barriers, passages and controlled access with a scanner, etc. Hearing protectors Gas detectors and analysers in compliance with the national and European standards in force. Our comprehensive services include: certificates of incorporation for machines complete technical documentation controls by competent independent organisations...

...Fixed table with quick disassembly Grain wheel 36 Brush control via servomotor Micrometric adjustment of the drive roller relative to the grinding wheel Adjustment of the inclination of the spatula group Color gray RAL 7040 HF protection Screen for insurer with HF protection level Vacuum cleaners C2 HP4 Timestamp (warning light during maintenance periods) Instruction and spare parts catalog in French and English Maximum carding width: 100 mm...

... (radial feed): 5.5 mm Distance between columns: 750 mm Table length: 770 mm Table width: 630 mm Clearance between grinding motor and table: 585 mm Max. load on table: 500 Kg Supply voltage: 400 V Weight: 4550 Kg EQUIPMENT INCLUDED: x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor x1 cable for grinding motor Machine visible under power in our premises by appointment.

...{"Motor":"50Hz IP55 protection","MECHANISM":"Steel","PUMP TYPE":"Equipped","Orifice":"1\"","Rotation speed":"1400 RPM","Self-priming volumetric pump":"","Maximum suction height":"4.5 meters","Specifications and advantages":"","Max head":"80 meters (JEV50), 100 meters (JEV51)","Maximum liquid temperature to pump":"90°C","FLOW":"max 1 m3/h","FLUID":"Diesel, Oil","ORIFICE":"3/8\"","Voltage":"single...

...Foam protection to secure your walls, especially in motor skills areas or sports venues; to be glued. Simili Cuir coating 750 g/m², classified as non-flammable M2. PE foam density 30 kg/m3, thickness 2.5 cm. Panel dimensions 150 x 130 Wide choice of colors. Dimensions: 130 x 2.5 x 150 cm Reference: Prot-Mur.2...

... Specifically designed for fixed or Float mounting which allow impeller immersion to vary in accordance with flow levels and associated oxygen demand. Ideal for Oxidation Ditches and Pocket ASP’s. 1.5 – 30kw Drive Motors 2 + 4-Pole + Dual Speed, Direct Drives Submersible Motor – IP 68 protection AISI 304 / 316 or special SS...

...Vertical stainless steel multi-stage pumps in line Liquid temperature: -20°C to +120°C Nominal flow rate: 32 m³/h Maximum pressure: 28 bars pH range: 4 to 10 Motor IE3 motor Protection class: IP55 Maximum ambient temperature: +40° Application Transfer of low-viscosity liquids that are non-flammable and non-explosive, containing no solid particles or fibers. These liquids must not chemically...

...Electric motor 4 poles (1450 rpm) with thermal protection and water cooling. Linear pump with 3 ceramic pistons, nickel-plated brass head with high-temperature seals and built-in bypass valve. Incorporated elastic seal for better coupling of the pump. Low voltage T.S. and delayed total stop. Stainless steel suction and discharge check valves. Vertical rûleur with high thermal efficiency...

... configurations of up to 8 units, for redundant parallel configurations (N+1) or power, and all the different possible configurations. High efficiency of up to 99.4% (standby mode) Compact dimensions: e.g., only 0.85 m2 for the VEGA HE 250 kVA Lightweight for an UPS with transformer Double load protection, electronic and galvanic, towards the battery.

...CHAMFERING UP TO 15 mm SKF25 Chamfering Machine: Voltage/Motor: 220-240 V AC, 50-60 Hz, Power: 1.1 KW Speed: 2850 RPM Feed: manual Angle adjustment: 15 - 60° continuously Max. chamfer width: 15 mm Manual feed Protection type: IP 20 Automatic disconnection in case of overload/restart blockage Weight: 22 kg Milling tool: surface-dressing cutter with 10 reversible carbide inserts...

...The CleanAIR Chemical 2F Plus assisted ventilation filtering respiratory protection system challenges all established standards in this field. No other equipment offers as much safety, performance, and comfort – both in terms of wear and use. With the Shigematsu GX02 panoramic mask available in 3 sizes or the new CF02 – the world's first mask specifically developed for asbestos removal – it forms the perfect set for asbestos abatement. Product Ref.: MS510000ASD-1 Dimensions: 240 x 110 x 120 mm Weight without filters: 980 g Charging time: 2 h 30 CleanAIR case dimensions: 420 x 160 x 335 mm...

... safety standards. SPS – Safety and Protection System: Electrically controlled safety flap at the opening; Multi-function electronic control EASY-SWITCH with user guidance through color codes and light symbols; Automatic return and stop in case of over thickness; Automatic stop when receptacle is full; Electronic door protection via magnetic contact; Double motor protection; Zero energy mode. Dimensions (HxWxD): 926 x 495 x 470 mm Weight: 48 kg...

...Cetaver® Adhesive Tapes Description: - The backing is made of fiberglass. - The adhesive mass is thermosetting. Uses: - Wrapping of spools and yarn bundles. - Outer finishing of spools. - Holding, wrapping of harnesses, cables. - Insulation of inductive coils. - Motor repairs. Anti-vibration protection. - Insulation between layers, between phases, of output wires.

...15-liter tank better suited for slopes for greater autonomy Galvanized chassis protection Differential lock for optimal traction on slopes Sturdy foldable protection frame for safety 27 hp Briggs and Stratton Bi-Cylinder engine equipped with a fuel pump and an oil pump. Sturdy outer chassis for long durability XL tires for increased ground clearance Hood suspension of the blades allows for vertical movements The 4-wheel drive riding mower with increased ground clearance for slopes and difficult terrains...

...Our areas of intervention: Installation and distribution of HTA, BT, and TBT (all neutral regimes) HT/BT transformation station from 160 to 2500 KVA Uninterruptible power supply (UPS) Low voltage panel Reactive energy compensation HT or BT (capacitor) Indoor and outdoor lighting Lightning protection Motor starting and speed variation Because your satisfaction is our priority, a single point of...

...Boat protection cover. Available in a simple version or with an electric motor at the front depending on the model. If you can't find your model, please contact us by email.

...– Mechanical predisposition for mortiser – Brake motor – Service keys – Protection for the bridge shaft – CE standards OPTIONS – Cast iron mortiser – TERSA shaft with self-locking and reversible knives – Spiral helical shaft with carbide inserts – Two-speed cutter shaft: 2500/5000 RPM (4.5/5.5 HP 400 V) – 5.5 HP three-phase brake motor – 5.5 HP three-phase brake motor Cast iron planing...

...ZAPI BLE4 36V 1000Arms (2min) Continuous output power 14kW IP65 protection, -40°C to +40°C 11 digital inputs / 4 analog inputs (including 1 motor temperature) 6 digital outputs Incremental motor encoder + Hall effect U/V/W + Sin/Cos Ampseal 35 connectors Compatible with ACIM, BLDC, PMAC, PMSM motors CANopen interface Reference: 225-052 Condition: New Dimensions: 235mm x 204mm x 103mm...

... storage. Many farmers (vine growers, fruit growers, market gardeners, etc.) use this solution to store and evaporate their phytosanitary effluents. Several options are available: - PHYTOGEST® ventilation motor alone to be adapted to a 1000-liter tank or IBC - PHYTOGEST® on a tank provided with a bag for managing 1 to 15m³ of effluents/year - NUCLEOS® for treating more than 15m³ - PACKR® for a complete mobile area: PHYTOGEST® + flexible area + lifting pump...

... - Outer rotor - Forward-inclined blades - Bearing-driven - Cable connection Ref: 300009 Power Supply: 230 V Current: 0.12 A Flow Rate: 38 m3/h Decibels: 38 Diameter: 97 Protection Index: IP20 Cable Length: 0.30 m Temperature Range: from -25° to +45° Speed: 1150 RPM Absorbed Power: 25 W...

...Electronic ballast - Power 144W (4x36W) Equipped with 3 sockets HO7 cable 3x1.5mm² x 5M Protection IP54 Shock-resistant plastic housing Reference: ES-I-PJT144W-3P...

.../lowering mechanism controlled by electric motor, gears, and worm screw. Compliant with safety standard EN 1757-1. Various gripping accessories. Beams H 91 mm x width 570 mm x length 625 mm. Capacity indicated for a load with center of gravity at 600 mm from the mast. Worm screw technology, lifetime warranty. Lifting/lowering speed (standard 45 to 55 mm / sec). Acceleration / deceleration. Programmable intermediate stop. Battery charger control.

...ADDITIONAL INFORMATION Housing Aluminum material with IP 55 protection rating Power supply 230 V 50 Hz with 3 meters of electrical cable Stainless steel heating element, electropolished Overall length 600 mm, including 200 mm of cold section Coil diameter 36 mm Power 600 W COMPLIANCE Adjustable thermostat between 0°C and +40°C Reference: D6065...

... with a spacing of 26 mm for support with washers and nuts - Aluminum housing with shaft mounted on self-lubricating bearings - Rotation speed: 1300/1550 rpm - Acceptable temperature range: -30 to +50°C - Protection: IP42 - Class B - Thermal protection when the temperature exceeds 135°C +/-5°C - Power supply via H03VV-F cable, 50 cm long Reference: VENTMULTI25W...

... tanks of 1000 liters, with a filling opening of 150 mm Motor: electric Field of application: tank External height: 275 mm Stirrer length: 1000 mm Material: stainless steel Power: 750 W Nominal voltage: 400 V Max viscosity: 500 mPas Rotation: 1000 rpm Validation / certificate: CE directive (2006/42 Declaration of conformity) Validation / certificate: CE directive (EMC 2004/108 Declaration of conformity) Validation / certificate: CE directive (2006/95 Declaration of conformity) Surface: raw Protection IP: IP 54 Weight: 32 kg...

...An autonomous alarm system for each displayed product A separate anti-theft protection for the motor body and the suction head LED status display for easy system control Compatible and additional to all C30 and C40 touch-free systems System control via PROKEY: a unique code for each store and a defined activation duration. Our products have undergone an electronic component modification. For...