measuring pressure and temperature France

... connection is achieved through a standard ANSI flange by default. Measurement ranges: 0-60 mbars to 200 bars Measuring scale: 40:1 (digital electronic) Accuracy: ± 0.075%, ± 0.1%, ± 0.25%, ± 0.5% Stability: ± 0.1% / year Operating temperature: -25 to 85°C by default, high temperature optional Power supply: 12 to 45 VDC (24 VDC is recommended) Output signal: 4-20 mA / HART Output load: 50 Ω Insulation resistance: >100 MΩ/50 V...

... pressure gauge: - Glycerin: for fluid temperatures up to +100°C - Glycerin: for fluid temperatures up to +180°C Connection standard: EN 837-1 Ambient temperature: from -40°C to +60°C without filling | from -20°C to +60°C with glycerin Maximum fluid temperature: up to 200°C without filling | up to +100°C with glycerin Pressure range: from -1/0 to 0/1000 bar Accuracy: Class 1.6 for Ø63 - Class 1 for Ø100 and Ø160 Material: Tube and connection in stainless steel 316L – Stainless steel casing Protection index: IP65...

...Measurement of volumetric flow – specifically in dust-laden applications. Easy installation on existing pipelines, no Venturi or similar modifications are required. Usable in environments with low dust levels or under harsh conditions with, for example, high dust loads. AirFlow P is the perfect measuring device for volumetric flow measurement at locations where differential pressure measurements...

...For measuring force, pressure, or torque using strain gauge sensors For measuring position or angle using potentiometric or DC/DC sensors For measuring temperature using Pt 100 sensors or thermocouples Optional multichannel model Optional Profibus or serial interface Measurement accuracy of 0.1% plus specific sensor linearization Range of mathematical functions (e.g., differential measurement) OK / NOK feedback on a multicolor display and via 4 alarm limit outputs High sampling rate (500/sec.)...

...Different types of pressure transmitters exist: differential pressure transmitter for measuring a pressure difference ΔP but also a relative or absolute pressure transmitter. For more specific applications, it will be necessary to use: a differential pressure transmitter to correct variations of pressure and temperature of a gas two transmitters for the same differential pressure flow element to increase the measuring range For more details on these cases, please see the Frequently Asked Questions tab on this page.

...The Efento NB-IoT wireless carbon dioxide (CO2) recorder offers a comprehensive solution for environmental monitoring. Measuring CO2 concentration, temperature, humidity, and barometric pressure, it transmits data via a Narrowband IoT cellular network. Easy to set up with a Bluetooth Low Energy interface, it integrates with any cloud platform. With a 5-year battery life, it ensures configurable...

...Designed for hygienic and aseptic applications in the food and life sciences industries Ideal for use in hygienic or aseptic pipes, tanks, or vessels, even with very short immersion lengths. It meets the increased protection requirements for temperature sensors against physical and chemical effects. Perfect for all measurement points requiring regular recalibration by simply replacing the measuring insert in closed-loop processes. Max. process pressure (static): 40 bar (580 psi) Standard max. immersion length: 4,000 mm (157.48") Immersion length on request: Not defined...

...The new HYDROBABY is the smallest portable device on the market for measuring dew points. These recently designed devices offer numerous advantages over older technologies, featuring a high-amplitude signal during small variations in low humidity levels, allowing for a wide measurement range of dew points from -110 °C to +20 °C. The measurement speed, improved reproducibility, temperature...

...excess air, and efficiency for all fuels. Equipped with 4 sensors, it allows for direct measurement of O², CO, NO², and optionally NO or Nitric Oxide (NO) up to 5000 ppm with NOx calculation. (range 0 - 100 ppm on request) Measurement of oxygen up to 21%: Combustion gas temperature Carbon Monoxide (CO) up to 10,000 ppm (hydrogen-compensated sensor) (range 100,000 ppm on request): Air inlet temperature Differential pressure (pressure or draft measurement): addition of another SO2 sensor: Sulfur Dioxide up to 5000 ppm...

... thermometer and measuring finger - Stainless steel ladder support, stainless steel lifting rings - Exterior finish: rolled - Interior finish "polished mirror" 3D - Tap system: - Electronic control 220 V/50 Hz - Stainless steel beating arm - Working pressure of 6 bar, dry air - Flanged pneumatic cylinder in the dome...

... well below the original, resulting in significantly improved testing accuracy. A powerful two-stage Peltier element eliminates the need for a bulky and expensive cryostat. The test principle is based on the pressure accumulation required to push a quantity of grease through a standard test nozzle at a preset temperature.

...Materials: aluminium body - polypropylene turbine Orifices: 1" BSP M/F Max. pressure: 20 bars Digital meter: for low-viscosity fluids with a turbine-equipped measuring system Charge loss < 0.03 bar (120 l/min with diesel) Accuracy: ± 1% in the flow rate range Repeatability: 0.2% Temperature of use: from -10°C to +50°C Measuring system: calibratable turbine TECHNOLOGY:Turbine ATEX:Yes...

...THE MOST ADVANCED AIR MONITOR IN THE WORLD Win the invisible war against pollutants floating around your home or office. Only uHoo's air quality monitor provides a comprehensive analysis of the air quality in your space by measuring indoor temperature, humidity, dust, toxins, nitrogen dioxide, carbon dioxide, ozone, atmospheric pressure, and more. TAKE BACK YOUR PERSONAL SPACE Don’t take asthma...

...Specialized testers, with computerized results Testers for Static or Dynamic Measurements. Press for pressurizing elements. Standardized Tests. Temperature up to 200°C. Software for Static Measurement Acquisition. Analysis and recording of readings. Report generation. Software for measuring stored loads. Analysis and recording of readings. Report generation.

...This complete pipette calibration setup includes: A desk with two side cabinets closed by doors An anti-vibration table made of marble A probe that records the environmental conditions of the laboratory: Temperature, humidity, and atmospheric pressure. A probe measuring the temperature of the water Wastewater recovery system Computer, monitor, keyboard, and mouse RADWAG "Pipety" software installed on the computer Power supply All you need to do is choose the balance you will need!

The KROHNE Group is a global leader in the manufacturing and supply of complete solutions for industrial process instrumentation. KROHNE designs, produces, and markets flow measurement devices (flow meters and flow controllers), pressure measurement devices (pressure transmitters), level measurement devices (radar and ultrasonic measurement), temperature measurement devices (temperature probes...

... and improving electrical consumption in industry, LAN testers, and network analyzers. Electrical calibration, temperature, infrared pyrometry, hygrometry, pressure. ATEX calibrators and measuring devices. Calibration benches and equipment tailored to your needs. Fixed instrumentation or portable instrumentation, recording systems, and data acquisition units. Injection case and milliohm meter.

... of standard products, and prototypes. Pressure transmitters for general industrial applications. Electronic pressure measurement. Mechatronic pressure measurement. Mechanical pressure measurement. Electrical temperature measurement. "Mechatronic" temperature measurement. Mechanical temperature measurement. The calibration laboratory is equipped with some of the most sophisticated calibration equipment, achieving a precision of up to 0.01% of the measurement point, to issue certificates for all types of measuring instruments.

... conditions, comply with numerous standards, and reduce pollutant emissions into the atmosphere: air flow measurement wings and stations, combustion analyzers, pressure sensors/transmitters, humidity and air temperature sensors/transmitters, flow meters, mechanical and electronic recorders for temperature and humidity, portable measuring instruments for engineering hygrometers, liquid column manometers...

...Prisma Instruments & Gauge Bourdon France is a company specialized in instrumentation and process control for industrial applications. It manufactures and supplies measuring instruments intended for production sites in major industrial sectors (oil and gas, petrochemicals, agri-food, construction...).

MENOVA is committed to providing all metrology services with the best market responsiveness (48 hours). Maintenance, Verification, Calibration, and Repair of measuring devices are the most requested services. Our experience and stock of spare parts allow us to offer repairs on obsolete equipment, as well as urgent services in the following areas. • Electricity - Magnetism • Time - Frequency • Temperature • Pressure...

... of high-quality instruments, software, and associated services that address all issues related to traceability, monitoring, calibration, and validation of equipment, meeting the requirements of laboratories and the needs of production and on-site maintenance activities. Motor Control Division As a manufacturer of starters for asynchronous motors, AOIP is one of the world leaders in the field of electrolytic and electronic starters for cage and ring motors, providing solutions suitable for all climatic conditions and applications.

... equipment for building regulation, with optional Modbus communication. Produal also provides peripheral products dedicated to measuring parameters related to air and water, such as temperature, pressure, humidity, CO2, speed, VOCs, and flow rate. Many Produal references are compatible with equipment from major regulation brands. In 2012, Produal established itself in the eastern part of Paris. Today, Produal France has a commercial and technical service, a customer support service, and a stock that allows us to deliver to you in the best possible time.

...Digimétrie "The Digital Measurement" manufactures and sells measuring devices for laboratories, industry, and national education. The areas of expertise include the main common physical quantities (voltage, current, temperature, pressure, humidity, acceleration, brightness, UV,...) particularly applied to medical, agriculture...)...

...BÜRKERT CONTROMATIC FRANCE manufactures products and systems for measuring, controlling, or regulating liquid or gaseous fluids, as well as for level, flow, analysis, pressure, and temperature measurement. BÜRKERT CONTROMATIC FRANCE designs and manufactures machines intended for fluid regulation: - Solenoid valves, - Process and control valves, - Pneumatic & process interfaces, - Sensors, transmitters, and regulators, - Microfluidics, - Mass flow regulators for gases, - Proportional solenoid valves, - Mass flow meters, - Pneumatic islands.

KOBOLD offers a wide range of industrial instrumentation for measuring quantities such as: flow, level, pressure, temperature, analysis: pH, conductivity, humidity, turbidity, density, angles and rotational speeds, time measurement, and all associated accessories such as taps, valves, and regulators. Examples of our products: float flowmeters, paddle, rotor, oval wheels, electromagnetic, vortex, Coriolis mass flowmeters, thermal mass flowmeters, oscillations, level gauges, magnetic gauges, manometers, pressure switches, pressure sensors, thermometers, thermostats, probes, thermocouples.

...Since 1901, SIKA has been designing, manufacturing, and marketing industrial equipment for the indication, control, measurement, and calibration of physical quantities such as flow, force, pressure, level, and temperature. We produce mechanical measuring instruments. All our products are made in Germany, at our headquarters in Kaufungen, ensuring 'Made in Germany' quality. Our range of mechanical instruments includes industrial glass thermometers, precision dial thermometers, protective tubes for thermometers, high-pressure gauges, dynamometers, and load cells.

ASK4 specializes in the distribution of instruments for measuring, controlling, and regulating your applications in the fields of ventilation, air treatment, and climate engineering. Our range also includes building automation systems. We offer differential pressure gauges (needle, inclined tube, U-tube), differential pressure switches, pressure transmitters, flow, air velocity, temperature and...

... manufacturing benches. Our products are dedicated to measuring force, pressure, linear and rotary displacements, tilt, vibration, humidity, temperature, and fluid properties. Used individually for monitoring and control, our measuring devices provide crucial information aimed at improving the efficiency and safety of equipment. Our mission: to understand your measurement needs and develop THE solution capable of meeting your performance and cost expectations.

...pressure, hygrometry, temperature, force, high and low voltage electricity, torque meters, and others). We are present in sectors such as aerospace and space, defense, transportation, construction (Infrastructure & Habitat), energy and petrochemicals, chemistry, the pharmaceutical industry and medical fields, as well as agri-food. We operate in the largest industrial hubs in France as well as in...