long holes France

...TYPE OF MACHINES : PERINI, PCMC, FUTURA, ... Depending on your converting process, the hardness and abrasivness of your products, we manufacture log-saws : Ø610 / Ø810 / Ø870. Standard bores : 68.26 / 82.55 mm. Short and long bevel : 190 / 230 mm. To obtain a clean and precise cut with an automatic sharpenning, we supply grinding wheels adapted to your machines. 1 / Log saw Ø810 2 / Log saw Ø610 3 / Log saw Ø870 1 / Grinding wheel Ø153 2 / Grinding wheel Ø100 B64 - 3 fixing holes 3 / Grinding wheel Ø100 B64 - 4 fixing holes ...

... <0.15 mm (in practice 0.02 to 0.10 mm). But the blocking in position is done on the carriage, by pressure on a guide rod, so as to remove the axial play of the nut of the trapezoidal screw after blocking. Manual crossed tables XY or YZ For the creation of XY crossed table, the tables are mounted one on the other directly by the body (long body version only) with the option 308922 * making smooth...

...Lightweight Long Sleeve T-Shirt From S to 3 XL This model runs large, it is recommended to take one size down from your usual size. Check your size with the size chart attached. Description: Absorbent fabric that keeps you dry Tagless Fitted Thumb holes at the wrists Care: Home wash Features: Flame resistant: NO Lightweight Big Bill® ExoDry®, 96% polyester / 4% elastane...

...RILLSTAR mud screens have been the choice of major drilling contractors worldwide for over 20 years. About 1 meter long, they provide a wide screening surface, limiting plugging while still retaining tiny debris thanks to 6 mm holes. Their durability is ensured by the choice of quality material and premium making. They are built out of 4 mm thick high-grade carbon steel perforated plates...

... worker protection measures. (see note from 05/12/2017 from the General Directorate of Labor) Reference: EGP500DER Destination: Drilling 4 holes - Installation of junction box Diameter: Ø ≤ 8 mm Surfaces: Smooth Packaging: Single-use pouch Minimum quantity: 30 units...

... controlled surface profile. Thanks to its efficiency and long lifespan, the HPG can be used, in certain specific cases, with projection speeds higher than normal (90 m/s or more) to treat parts or areas that cannot be properly cleaned using standard shot. #2 Performance: Reduces your unit shot blasting costs by 15% • Increased productivity by 10% • Reduced shot blasting time by 10% • Energy savings of 30% • Decreased shot consumption by 10%...

...Made from odorless and food-neutral powder (by me). Important note: There may be imperfections such as small holes, larger holes, or micro-cracks; this is a normal reaction. Size: 15cm long, 11.2cm high, and 13.5cm in diameter. Lead time: 5-10 working days + delivery.

... product for your customers. Simply cut it and apply it to seal holes, cracks, and fissures, protecting against moisture and air. Our adhesive even allows for underwater use, making it ideal for pools and plumbing. COLMA TAPE is available in 2 colors: black and white, in rolls that are 10cm wide and 150cm long. We offer our product to all professionals in cartons of 48 pieces.

... LoRa with LED light Operation: Fixed, Flash Number of Lighting Modes: 2 Type of Lighting: LED Luminous Power in Candelas: 120.0 cd Synchronization: Yes Sound Power in dB: 126 dB Sound Adjustment: Yes Protection Index: IP66 Minimum Operating Temperature: -25 °C Maximum Operating Temperature: 55 °C Relative Humidity: 90% at 20°C Voltage: 115, 230 Tolerance: 100-240 VAC Cable Entry: 3 holes Ø 20 mm Batteries Provided Yes/No: Yes Number of Batteries: 1 UN Depth / Thickness: 191.5 mm Weight: 2.7 Kg Housing Material: Self-extinguishing ABS Color (material): Gray...

...H-guiding unit for cylinder diameter 32mm, ISO 15552 - Classic series 324A-32 The unit provides long and precise guidance on 4 ball bearings or 4 smooth bronze bushes. Guidance protection by 4 wipers. Free rod coupling on the front plate. Positioning holes according to CNOMO recommendations. Delivered with a pouch of 4 screws for cylinder fixation. Maintenance-free. Anti-corrosion version available upon request: Coupling, columns, screws: Stainless steel. Options: Special stroke upon request - Anti-corrosion version. Dimensions and load table: See PDF.

... possible to the cartridge Installation: For HC cartridges, calibrated holes with tolerance H7 are required. To facilitate assembly, we can provide graphite lubricant in aerosol or paste form. STANDARD MANUFACTURING Connection via long insulated wires 250 STANDARD MANUFACTURING Connection via long insulated wires 250 Metric dimensions Ø Length Power 6.5 40 to 160 125 to 350W 8 40 to 160 100 to 400W...

...Large and long tabletop Rounded corners to prevent accidents High-quality 2.5cm thick particle board Ideal for individuals with reduced mobility Carefully finished Fits on the Hi5 electric desk frame Two cable holes located at the upper corners of the tabletop Natural wood available in a choice of colors: white, black, walnut, oak...

... laser diodes stacks high-power laser diodes diode lasers semiconductor lasers fibre lasers Products Microcertec offer the following custom-made components : - plane heatsinks : very thin substrates : 100 µm to 200 µm with 5 to 10 µm tolerance on thickness and flatness substrates in standard thicknesses : 300 to 500 µm with 5 µm or better tolerance on thickness and flatness grooved substrates : 150 µm-grooves with pitch tolerance of 5 µm substrates with holes : wall thickness of 200 µm hole to edge, and 500 µm hole to hole - specific heatsinks : precision-ground customized features, plane...

...Extracts the small long shaped pieces from the flow of green beans. Vibrator comprised primarily of a vibrating pan with aligning corridors and holes with a length that can be adjusted as well as upper screens. Also separates small heavy waste and gravel. Optional perforated upper screens according to the characteristics of the sorting to be carried out. Capacity:500 kg/h to 3 t/h according to the model and the calibre of the green beans.

...Standard from Ø0.90 to 20.25 and in H7 tolerances. Progression 5µ in short series and DIN 212. Progression 0.01 mm in long series. Also available in straight size for blind holes. Also available with internal lubrication. Also available in HSS-E from Ø0.90 to 13.20 and in H7 tolerances.

... + arrows/pedal)* to be affixed. Hydroalcoholic solutions are not included as standard. Options or complementary items available: - Anti-theft system (requires the purchase of a padlock not included) - 2 floor fixing holes (requires the purchase of floor fixings not included) - Customization on 3 sides with magnetic cover for metal stand - Customization on 3 sides with hydrodipping for metal stand** - Kit including 1 bottle of 500 ml hydroalcoholic solution + 1 long spout pump.* Unless the stand is delivered customized. ** With connector. 1-meter long models available for selection on the site.

... with a spacing of 26 mm for support with washers and nuts - Aluminum housing with shaft mounted on self-lubricating bearings - Rotation speed: 1300/1550 rpm - Acceptable temperature range: -30 to +50°C - Protection: IP42 - Class B - Thermal protection when the temperature exceeds 135°C +/-5°C - Power supply via H03VV-F cable, 50 cm long Reference: VENTMULTI25W...

...USE : Holes to countersink the Heads of Coachscrews into Long Wooden Sleepers. ADVANTAGES : Simples, Tough, Adjustable and easy to Re-sharpen. - Steel Body - Superior High-Speed steel blade locked with a conical Key - Range of Adjustment : Ø 38 to Ø 80 mm Hole. - Centering Attachment Ø 15 mm - Total Length = 230 mm - Net Weight = 1 Kg - 23 mm Square Shank Drive - Ref. FR-23 - Ø 16 mm Cylindrical Shank Drive - Ref. FR-16 OPTIONS : - H.S.S Spare Blade ( can be re-sharpened) - Ref. LFR...