load lifting equipment France

...Universal double-jointed lifting ring HR. It allows for lifting loads with rotations while maintaining perfect alignment. Its features: - A GRADUP steel ring that can be turned under load. - Rotation on an axis of 360° and rotation of the ring's handle by 180°. - Suitable for textile slings, shackles, and lifting straps. - A safety factor of 4 (for Europe). - ISO 14001 and ISO 9001 certification. Refer to the dimensions and SWL table. SWL: 0.4 T, 0.7 T, 1 T, 1.3 T, 1.6 T Dimensions: From Ø M8 to M42...

... load is 2.5 times the permissible load capacity. The maximum indicated load must not be exceeded. With a non-loosening but removable H screw. Our lifting rings are certified by the DGUV. Our lifting rings contain an RFID chip with an integrated certificate to enable serial traceability.

... in vertical or lifting modules in the design of pneumatic handling assemblies. Equipped with hydraulic dampers, inductive sensors, and flow limiters, these manipulators are ready to be installed and wired. Fine adjustment of the stroke is done via mechanical stops without any intervention on the hydraulic dampers and inductive sensors: this saves time, ensures the reliability of the adjustment, and guarantees optimal lifespan of these components. Model: 3022-3024-3026 Cylinder diameter: Ø20-Ø32-Ø50 Guiding column diameter: Ø12-Ø20-Ø25 Stroke: 25 – 160 mm Maximum load capacity: 1 to 30 kg...

...ROLL LOADING SOLUTION GENERAL INFORMATION Load rolls directly from the ground using your hand or feet. Battery operated, forget about crank handles or foot pumps. Possible to lift up to 1.2 meters to load rolls from racks. Lifting weight maximum 150 Kilos. Designed for rolls up to 3.2 meters wide. You can move the lifter sideways to pass through doors (80 cm). Loading rolls to the printer becomes a one person job. Quick Lifter is the best way to avoid back injuries among employees. Lifting weight:maximum 150 Kilos...

...These digital dynamometers are precise (0.1%) and lightweight (aluminum). Their lightness will make your task easier if you are performing Periodic Checks of lifting devices or tugboat pulling force controls. They are available in 2 versions: with an integrated display. Without display, the weight being shown on a 2.4 GHz radio remote control equipped with a 6-digit display. The radio...

... will be discreet and practical in any situation. They are essential in the absence of a dock. We also carry out the installation and after-sales service of our equipment. Load capacity: 500 kg Folded position: from 150 to 330 mm Platform width: from 800 to 2000 mm Platform length: from 600 to 1600 mm Stroke: from 450 to 1300 mm High position: from 600 to 1630 mm...

...Advantage: The integrated movement in the device allows for the turning of concrete tanks in a five-minute cycle without the need for additional handling. This movement occurs in a reduced and minimal space and does not require any special logistics: sandpit, dedicated area, forklift, etc. The suction cup seal is suitable for the vertical handling of deactivated or scratched concrete surfaces. Energy: The lifting beam is electrically powered from the precast factory's power supply.

... other barrels. Position the two orange arms on the edge of the barrel and then maneuver the gray arm on the other edge to tighten the barrel. To loosen, do the same in reverse order. Simple, quick, and risk-free lifting. Made from high-strength alloy steels, the DG10 is capable of safely withstanding unexpected shocks caused by collisions, rebounds, or swings. Model: DG10 In stock: 4 Products Safety Factor (SF): 5 / Test Load 1.5 x WLL Marking: According to the standard, CE marked Standard: EN 12100, EN 13155 Caution: Edge diameter of 570 to 610 mm. Safety Factor: 5:1...

... lightweight. They allow ropes to pass through without friction and without causing damage. They are suitable for permanent connections and enable braking during load descent. Their large opening accommodates ropes with sewn or spliced ends. Areas of application: Lifting industry, construction, towing; tree pruning and felling, forestry; rescue and caving applications. Uses: dismantling pulley; hoisting heavy loads; deviation point or connecting element; retention brake; winches; for all types of ropes.

... drums on shelves. Field of application: Lifting / turning / transporting plastic and steel drums. Motor: pedal pump. Chassis / equipment: wide. External width: 1216 mm. External depth: 1233 mm. External height: 2135 mm. Ground clearance height: 85 mm. Wheel diameter: 125 mm. Roller diameter: 85 mm. Actual chassis width: 954 mm. Total permissible load: 300 kg. Material: steel. Color: red. Lifting...

...Grade 80, Lengths 3 and 4 m, diameter 6 to 16 mm, resistance up to 11T2 - 2-leg Grade 80 chain sling for all lifting operations for civil engineering and construction sites, agricultural and industrial activities. Alloy steel sling treated with automatic hooks and shortening hooks to adjust the length of the chain. Maximum Working Load (MWL) of 1600 kg up to 11200 kg, safety factor of 4. YOUR...

....","Manufacturing":"Mechanically welded part (Semi-automatic MIG welding).","Marking":"Raised marking (DCNS designation of the item, CE mark, Colin Milas identification, SWL, and manufacturing lot number)."},"Usage Domain":"Usable for lifting, handling, anchoring, mooring, and refueling at sea.","Standard Finish":"Shot blasted"}...

...The manual, mobile, and hydraulic lift table allows you to transport and level your loads. Easy to maneuver, it is equipped with two fixed wheels and two swivel wheels with brakes. It features a lift pedal for raising and a lever for lowering. Available load capacities: 150, 300, 500, 750, 1000 kg.

...More precise than an electric hoist, more responsive than a pneumatic hoist, and twice as fast as most traditional lifting devices, IN-LIFT® by INGENITEC has already proven itself and won over many users across various industries. Controlled by a processor, it consists of a servo motor, a servo driver, limit switches, a control screen, and an integrated load cell that continuously detects the...

.../lowering mechanism controlled by electric motor, gears, and worm screw. Compliant with safety standard EN 1757-1. Various gripping accessories. Beams H 91 mm x width 570 mm x length 625 mm. Capacity indicated for a load with center of gravity at 600 mm from the mast. Worm screw technology, lifetime warranty. Lifting/lowering speed (standard 45 to 55 mm / sec). Acceleration / deceleration. Programmable intermediate stop. Battery charger control.

... position: from 85 to 90 mm Fork width: 165 mm Steering wheel: black nylon Load wheel: black nylon bogies LIMITED EDITION -- while stocks last Prices exclude SHIPPING COSTS (please consult us) Brand: Logitrans Model: Manual High Lift Pallet Truck Reference: HL1006 Year: 2016...

...4 safety hooks Maximum load: 2 tons CE plate Ref: KAD-PALAN Dimensions: 900 x 900 mm Maximum load: 2 tons Finish: RAL 1028 painted Payload: 2000 kg...

... facilitates lifting and handling. Even when alone, manipulation is effortless and safe thanks to the two silicone feet and four wheels, two of which are swivel. The Aquabike Lift adapts to the most complex pools. It can be positioned wherever you like, without cluttering the edge of the pool. Reference: WX-AQUALIFT Base dimensions: 53x72cm Max. height: 2.27 m Max. width: 2.30 m Weight: 110kg Max. load capacity: 70 kg...

... reduce height and prevent bags from bursting. Maximum load per Manubag: 2 tons Composition: 1 frame, 4 forks, 1 base Optional accessories: safety chair, lifting frame, fork tunnels, etc. Finish: galvanized...

... - C-shaped rail (Omega) - Galvanized or stainless steel rail - Retractable rail - Solutions equipped with: > Stops > Rolling beams > Lifting beams > Switches - Loading/unloading station - Simple transfer cart or lift (from 1 to several rails) with patented connection and locking system. OCA has developed an ergonomic handle to facilitate the movement of the transfer cart while ensuring the safety and well-being of operators.

... do not lead to the lifting of the slabs. Material: 100% recycled and recyclable LDPE Color: black with crossbars at the base Attachment system: by mortise and tenon Resistant: to frost, UV stable, unbreakable Dimensions: cellular slab 333 x 333, cells 60 x 60 mm Height: 40 or 50 mm Load capacity empty: 150 t/m² (E40-S50) and 350 t/m² (E50) Load capacity filled: Min 800 t/m² Sales unit: pre...

... factories and workshops. Before installing a gantry on a post, it is necessary to conduct a preliminary study of the support (concrete floor) on which it will be placed, in order to verify its stability. The manual rotation lifting gantry series "GBA" It is available in standard versions as follows: + - "C" profile version This ergonomic profile is suitable for load capacities ranging from 63 to 1,000 kg and arm lengths from 2 to 7 meters, with an overall height of 3 to 6 meters depending on the load capacity. The arm is made from a hollow profile and at the...

...USAGE: Substitution of rails and track devices (lifting and aligning the track). Loading and unloading of track devices on a rail vehicle. ADVANTAGES: High safety equipment. Easily disassembled and transportable. Reinforced horizontal beams made of aluminum alloy. Hoists equipped with a safety brake. Steel feet with transport wheels on rail and handling handles. Length of horizontal beam (m...

... remote control 24V with plug, except for CD version. Standard power supply socket. Option: Emergency stop. Capacity of 60 m of cable 0.5 mm. Single-phase motor 220 volts - 50 Hz, lifting type. Capacitor start. Class F, IP 54 protection. Three-phase motor 220/380 volts, 50 Hz, lifting type. Class F, IP 55 protection. CD models: single-phase brake motor 220 volts, 50 Hz P= 1.1 Kw. Capacitor start. Control box at 220 volts, IP 657 protection, double insulation.

... the sweeper with axial pistons and variable displacement, with load sensing system:- Hydraulic opening of the rear tank door, by remote control.: - Lifting of the tank for unloading at a height of up to 2310 mm.: - Conveyor system for collecting waste.: - PTAC: 10,750 kg; empty weight: 7,000 kg*:- L 5200 mm – l 1870 mm – h 2940 m.:-...

The company BADT LEVAGE specializes in the manufacturing and maintenance of lifting and handling equipment. Our 16 technicians, spread across the Normandy region, our access means (aerial work platform), and our equipment fleet (30 tons of load available for rental) ensure the commissioning of your installations within a short timeframe. Our experience in aerial handling revolves around the...

TRACTEL® Solutions offers a wide range of standard products or those tailored to customer specifications, including: lifting or handling equipment, load measurement or control devices, suspended work platforms, and fall protection safety equipment: - manual or motorized lifting and pulling equipment, ground handling equipment, fall protection gear - dynamometers, weighing hooks, tension meters...

...MPI distributes lifting and handling equipment for ports and industrial sites. From its workshops in Le Havre and Saint Nazaire, MPI's technicians are at your disposal for all maintenance work, refurbishment of equipment, preventive or corrective maintenance on your lifting and handling equipment, cable and brake replacements. MPI offers the following services: rental of test loads and handling...

...The activities of S.E.R.E.T (Société d'Etudes et Réalisations Techniques) are primarily focused on the manufacturing and marketing of workshop equipment (load turners, lifting tables, etc.) as well as partitioning and archiving materials (wheels, casters, lockers, workbenches).

... intended for the industry to secure any transport or lifting process of loads. Our fall protection systems can stop the fall of a load over very short distances, just a few dozen centimeters. NEOFEU is ISO 9001 certified. It is also equipped with DATAMATRIX technology and, upon your request, can provide this technology to ensure perfect traceability of its products throughout their lifespan.