screw it France

... is done on the transmission screw, either at the bearing (position B1) or at the end of the table (position B2). The output shaft is threaded to screw in the knurled knob with or without position indicator (or the handwheel, but it cannot be used with an indicator). The maximum achievable stroke is 100 mm, and any intermediate non-standard stroke can be realized. A "Z-axis" version allows the table to be fixed only by its end plate. Model: 309A0 Screw Ø x pitch: M6 x 1 Guiding column Ø: Ø8 Strokes: 0 – 100 mm Maximum load capacity: 1 kg...

... liquids and gases, including steam (saturated or superheated). It has demonstrated excellent reliability in commercial transactions. Diameter: DN25 to DN300 Pressure: 16 bars by default, other pressures available upon request Power supply: 12VDC, 24VDC Output signal: 4 – 20 mA, pulse, Modbus RS485 Electrical connection: M20*1.5 cable gland Protection: IP65...

...Equip your facilities with this stainless steel 316 threaded sleeve. A stainless steel sleeve allows for a connection between pipes in a fluid distribution network. It is perfectly suited for networks that are frequently disassembled. Available diameters: from DN6 to DN100 Threading: Gas or NPT Standards: CE 1935/2004 Nominal pressure of the threaded sleeve: 50 bar Standard: ISO 228-1 (except NPT)...

...The stainless steel PAL nuts are used in situations where the tightening force is low to moderate. The stainless steel PAL nut DIN 7967 screws on like a regular nut onto a metric thread. The locking occurs through the pressure exerted by the PAL nut on the thread, making it non-loosening.

...The hexagon socket countersunk screw in stainless steel is ideal for directly fastening components to metals in fastening and screwing tasks. It is made of stainless steel and has good corrosion resistance. Material: Stainless Steel A2 Diameters: M2.5 to M20 Available lengths: from 5 mm to 130 mm Standards: ISO 10642 (similar to DIN 7991) Head shape: Countersunk Drive shape: Hexagon socket Thread type: Metric...

... fixed anchoring in the substrate. Thread D1 according to ISO 6H. In certain materials, the cutting slot threaded inserts slightly tighten inward in the area of the cutting slot, resulting in a certain locking effect of the screw. If this effect is not desired, it is recommended to use the threaded inserts with cutting holes. Reference: 07652 Material: Steel or Stainless Steel 1.4305...

... entertaining baby in the playpen or soothing them at bedtime. Integrate it into the sleep routine for a gentle transition to the land of dinosaurs. Attaching it to the crib is simple: Screw the two wooden parts together on either side of the support. The mobile from our "Diplododo" collection is an unforgettable gift for newborns, nurturing the dreams and awakening of little ones. Reference: 845 5005...

...This eye bolt (Eye screw with nut and washer) can be used for securing a cable tensioner. Its 40mm thread allows it to pass through a square post with a maximum size of 35mm. The eye has an inner diameter of 12mm, and its collar will press against the support. The 40mm measurement is taken from under the collar. Reference: 9004.0640.6000 Type of screw: Metals Dimensions: M6 x 40 mm...

...The glass candle holder with a brown screw cap is both elegant and functional. Made from high-quality glass, it offers a beautiful transparency that allows the warm glow of the candle to shine through, creating a warm and soothing atmosphere in any room.

...Neodymium magnet in a steel casing, equipped with a threaded rod into which you can insert a screw of the same size. The magnet is made of neodymium, an alloy of iron/boron/rare earths that currently offers the maximum magnetic power. It is wrapped in a layer of nickel-chrome (an alloy of chrome and nickel) that protects it against corrosion and gives it a more aesthetic finish. REFERENCE: AIRGT10 Thickness: 12 Length: 20 Width: 20...

...Rotating lifting ring, threaded or with a threaded rod MATERIAL - Forged steel 1.6541, Grade 100, high-strength heat treatment, pink thermochromic coating. - Ring and screw 100% tested for crack resistance. - Sheet metal key, subjected to heat treatment. - Safety factor 4. USAGE - If the key is inserted into the hex socket, manual tightening and loosening is possible. - If the key is removed, the ring can rotate 360°. - It orients in the direction of the pull. - Complies with European standard 2006/42/EC. - Warning: In the case of an asymmetric load, each ring must bear the WLL alone.

...The Bock FX2 open compressor is factory-charged with nitrogen at 3 bars. It is recommended to maintain this charge for as long as possible to prevent air ingress during transport. The FX2 compressor - 2 cylinders is designed for external drive (V-belt or coupling). Lubrication is provided by a standard oil pump. Special features: - Compact construction - Robust and easy to handle - Suitable for drive by V-belt and coupling - Wide range of applications due to an extensive speed range - Lubrication by standard oil pump - Suitable for all refrigerants including NH3.

...Allows you to secure a garden shed or wooden structure to the ground. The pull-out resistance depends on the nature of the soil and varies from 200 to 700 kg per locking stake. Installation technique: Slide the plate under the beam and then screw it onto the beam using a 10 mm screw with a through nut or a lag screw. Drive one or two locking stakes into the designated locations until the washer...

...■ Phase 1: For the manufacturing of parts, we use plastic pellets specifically designed for blow extrusion. A colorant is added to the raw material in weight feeders, then the entire mixture is weighed and blended before passing through a screw where it is preheated from 200°C to over 270°C. This mixture finally reaches the head of the machine to be extruded. ■ Phase 2: The blower then extrudes...

...Used air cooled water chiller HITACHI in very good condition. This chiller is composed of a screw compressor and it is sold under guarantee. We offer for sale a wide range of models of all powers, do not hesitate to contact us by email (lucas@mia-equipements.com) Item code: CP30164 Brand: HITACHI Type: RCU2E 40 AG2 Power: 112 kW Capacity at: 7°C / 12°C Ambient T: 35°C Refrigerant: R407c Year: 2011 Voltage: 400V/3ph/50Hz Dimensions: 2430*1900*1900 mm Weight: 1430 kg In stock: 1...

...Adjustable claw clamp that attaches to all models of IP / IPE / IPM beams. This mechanical trolley can be installed in no time and is available for 1 ton or 2 tons of load. It is easy to assemble and disassemble, similar to a car jack, thanks to its worm screw with a crank. Certified tool TÜV / GS / CE Reference: PL00163 Max load: 3 tons Safety factor: 1:4 Adjustable worm screw: from 70 to 380 mm Dimensions: 50 mm X 330 mm Material thickness: 6 mm Fixing eye: 30 mm Weight: 10 kg net...

...Patented Rope Ratchet system, easy-to-use single line tensioner For securing your tent to screw-in anchor stakes, or to weight bags, water, railings, car rims, etc. The Rope Ratchet tensioner system has been designed for easy setup and takedown! Thanks to a ratchet wheel system, you can tighten/lock the tensioner, and to release it, simply push the small release latch. Our Rope Ratchets come in a...

... simultaneously (for example, different widths or colors). The dispenser can be securely fixed using the provided clamps or screws on the packing table (four screw holes are provided). The adhesive is unwound and cut by a fixed blade.

... clamping jaw uses a handwheel coupled with an ACME-type precision screw for positioning, along with a hydraulic clamping and quick-release system that is powerful and efficient. This semi-automatic band saw has variable cutting speeds, a pivoting arm, and a hydraulic-controlled descent mechanism for cuts. Orientation up to 60°: Manual pivot Power supply: 220 Volts, 60 Hz, Single-phase...

...Collector drum for the collection, transport, and disposal of sharp, cutting, and piercing hazardous waste With stopper (without stopper on request) Final closure by activating 11 clips (auditory and visual safety) French manufacturing Compliant with standards NFX 30 511, NFX 30505, and ADR UN3291, UN3H2 Thanks to its screw closure system, once permanently closed, it is tamper-proof to secure...

...Manual tool with removable and resharpenable blades used for leather paring at the workstation. It is designed to thin, reduce thickness, and refine the leather at one end. Ergonomically shaped handle made of black anodized aluminum and natural boxwood. Integrated key in the handle and screw for tightening the blades. Blades made of high-carbon alloy steel, hardened and ground. Hardness of 60 to 63 HRc. Razor-type sharpening. Service for grinding and resharpening the blades.

...Automation suitable for small gates. Its mechanical principle of bronze wheel and screw provides it with robustness and longevity. The articulated arms made of aluminum are self-locking when closed and do not require a lock or electric bolt. Visible automation with self-locking linear arms. Automation for swing gates up to 150 kg and 1.8 meters. Remote electronics. A Mastery Controlled ROBUST RELIABLE QUIET FAST VISIBLE 7-YEAR WARRANTY ON THE ELECTRIC MOTOR...

... your studies, particularly in special metals (Tungsten, Molybdenum, Tantalum, etc.). It also includes the possibility of carrying out constructions, assemblies, or even welding in these special metals after prior study by its technical team. The service of Concept Metal is focused on customer satisfaction through the responsiveness and relevance of the answers provided, thanks to the skills of our...

... notably distributes the Boschert system for coil support bearings, unwinding brakes, expandable spool shafts, unrolling or guiding rollers, and systems for controlling and measuring strip tension. Regarding high-end transmission components, it offers Warner-Tourco equipment (clutches, brakes, limiters, freewheels, ball screws, electric cylinders), KTR couplings (elastic, toothed, rigid, torsional...

... blocks, guiding elements, low-maintenance friction elements, precision components such as punches and cutting dies, wire springs, gas springs with maximum safety levels, and elastomers. It offers metal adhesives and special resins, peripheral elements for presses and tooling, cam slides, roller or hydraulic slides, as well as standardized components for injection molds.

... machine GLD20, CNC screw machine STAR SV 32 (for the medical sector), and a TESA VISIO DCC measuring machine) and the skills of its team, UDT MECA emphasizes precision, mastery, and a passion for quality work. These qualities have enabled it to become the preferred partner of companies throughout France and abroad.

TECNIMODERN AUTOMATION is based in St-Germain-Laval. It specializes in the manufacturing of assembly solutions. It is a machine manufacturer that enables the packaging, welding, counting, and weighing of products from various industries, with a conveyor range that allows for feeding, distributing, and orienting. TECNIMODERN AUTOMATION offers a complete range of vibrating bowls, screw fastening spindles, gyroscopic riveting, special assembly machines, distribution hoppers, as well as conveyors.

...and lobes, two-screw pumps, multiphase pumps, single-screw pumps, three-screw pumps, double units, volumetric flow meters, triplex piston pumps, and centrifugal pumps. It also provides protective equipment: flame arresters, breathing valves, pressure regulators, or rupture discs. Its maintenance and repair workshops enable it to service all brands of pumping and safety equipment.

...The company NOVAXESS TECHNOLOGY is based in Saint-Loup. It designs and manufactures chip conveyors and filtration systems. Expertise, quality, and robustness are the main strengths of the company. The chip conveyors, made "to measure," can be produced according to a model with on-site measurements or based on a plan. Its conveyors (using belt, scraper, screw, and harpoon technologies) are...