frame polyamide

...Polyamide frame PA66 GF25 V0. Elastic EPDM plate, ozone cracking resistance according to DIN 53509, level 0 (best level). TPE TPV seal. The cable entry plates are suitable for guiding cables without connectors (non-molded cables). Cables, tubes, pneumatic and hydraulic hoses can be introduced. Cable entry can be done without tools. The elastomer plate provides optimal sealing and strain relief...

...Dimensions Of Parasol 350x350/8 cm CM Dia of the Frame 60 mm It consists of 8 Ribs. 2 Years Warranty for the Breakage Press the button Placed on Frame then Push it up to make the parasol open. The Plastic Parts of the Parasol is Produced from ABS and Polyamide Pa6 Prime Raw Materials. The Parasol's Fabric is produced from 310Gr. Acrylic Hemline and Printing are optional...

... CONTA-CABLE product category. You can also obtain the suitable tools for creating the housing cutouts, which will later be equipped with KDS products, through us. For more information about our extensive product portfolio, please visit: https://conta-clip.de/de/produkte/kabeldurchfuehrung-und-kabeleinfuehrung Height (mm): 19.6 Width (mm): 70 Length (mm): 106 Material: Polyamide 6.6 Protection class: IP66 Length of wall cutout: 68.5 mm Width of wall cutout: 46 mm Operating temperature (from/to): -40 - 120 Flammability class: UL 94...

...This highly innovative, industry-leading material enables high-precision processing and guarantees good mechanical stability. All the positive properties of Polyamide 6.6 GF25 are retained, while the lambda value has been reduced to 0.21 W/(m·K). High-precision processing and mechanical stability Additional enhancement of high-end systems through the reduction of profile depths and frame sizes...

... are properly sealed, the grommets are positioned in the frame and compressed when the upper part of the frame is screwed down. Frame material:Glass fibre reinforced polyamide Type of protection:IP 66 and UL Type 4X (indoors), with multiple grommets, too Temperature range:–40 °C to +100 °C Grommets with a sealing range:Of up to 1.6 mm Frame sealing:Integrated elastomer frame seal...

...Features: - The MEILI flat lifting straps are equipped with "longitudinal fiber bundles" that serve as the load-bearing element of the strap. The incorporation of these fiber bundles using a special frame, within a tightly woven outer layer,...

...Melamine resin tabletop: - Particle board according to DIN 68765 (decorative coating on both sides), with 2 mm ABS edge banding High-quality Y-frame BOYAS: - Precision steel tube Ø 60 x 2 mm chrome-plated, arms made of black polyamide, reinforced with fiberglass - Middle crossbar precision steel tube Ø 45 x 2 mm - Mechanism with 2 folding table adapters made of black fiberglass-reinforced...

...KRISTINA nightdress delights from the first glance. The base of the piece made with smooth, flowing viscose. Bardot-shaped bra, cut off under the bust, finished with an elastic band. Further down the nightdress is let loose. The entire top enclosed with beautiful, expressive lace. Carefully arranged embroidered flowers bring to mind garlands slung over the shoulders. At the back, the openwork fabric creates a masterful frame for the back, reaching almost to the buttocks. Material composition: 90% viscose, 5% elastane, 5% polyamide Color:Ecru Sizes:S-XXL...

...Item No.: 592013 Storage net Specification Storage net Net, non-elastic, with crocheted elastic selvedge, mounted on wireholder in 2-piece injection-moulded frame Model type: C (Customised) Dimensions: approx. 251 x 152 mm Material: Polyamide Colour: black Property: non-elastic Packaging: packed in cardboard box Note Features: Integral, crocheted selvedge...

...High-reach diffusers with 3-way air outlet. - Acceptable flow rates from 5,500 to 63,000 m3/h. - Made of galvanized steel painted with oven-dried polyester powder coating in RAL 7035 gray. - Simple deflection grilles with polyamide slats. - Opening adjustment from 0º to 90º. - Option to supply with double deflection grids. - 30mm METU mounting frame.

... a more economic window to fabricate by simplifying this phase and reducing the necessary manufacturing time by between 15 to 20%. It is made up of external aluminium profiles that are assembled with 14.6 & 16 mm polyamide strips that make up the thermal breaking zone and improves notably its thermal insulation and being able to reach minimum transmission values of 1.1 (W/m²K). The joining of the external aluminium frames and the internal timber mouldings can be carried out in two ways: by fixing independently with clips (this allows for the substitution of the mouldings Maximum glazing:40 mm...

...The Triton system is a thermal break aluminum profile system with 3 chambers. The omega-shaped insulation bars made of fiberglass-reinforced polyamide, along with additional insulation blocks, ensure a Uw coefficient of up to 1.49 W/m²K. The Triton system is the ideal solution for energy savings. The profile depth is 72 mm for the frame and 81 mm for the sash. Triton is available in three style variants: Standard, Linea, and Planea.

...EN355:2002 and tested according to the requirements of VG11 – 89/686/EEC. Material: - Polyamide Rope, - 1 Aluminum Carabiner, - 2 Aluminum Hooks. HS Code: 56090090 Usable by a user with a maximum weight of 100 kg. Fall indicator label: Before each use, check your energy-absorbing lanyard. If the "NOT OK" frame is visible on the label, it means that your equipment has stopped a fall and should not be reused. Please replace it with compliant equipment. SKU: FK-FA3060010 Length: 1m Maximum user weight: 100 kg...

...BASIC 60 system, which has a frame depth of 60 mm, is an ideal high-performance alternative for doors and windows in projects with its 24 mm glass fiber reinforced polyamide barrier and 3-chamber structure. The system is suitable for all openings required for windows and doors, such as inward or outward opening, double opening, and transom window. The system, which can be used with all opening...

...Wherever pre-assembled cables with connectors need to be introduced into a housing, the KADL is the pioneering solution. The KADL can be mounted in a snap. It's simple and saves time. The modular design allows for a step-by-step installation of 3 to 25 cables. With 16 bushings, clamping ranges from 3 to 32.5 mm are covered. - Temperature range from -30 °C to +100 °C - Protection class IP65 - Testing standard UL 514B - 12 frame variants with a total of 16 different bushings (accessories) to choose from Protection class: IP65 Temperature range: -30 °C to +100 °C Material: Polyamide, TPE...

... but is lightweight at the same time, offering ultra-smooth opening and perfect sliding of the leaf on a stainless steel rail" "Maximum glazing thickness 55 mm " Opening possibilities Sliding of 2, 3, 4, and 6 leaves Possibility of 1 rail (1 leaf + 1 fixed light) & 3 rails " Sections Frame 160.6 mm - 3 rails 251 mm Leaf 70 mm " Profile thickness Door 2.0 mm " Length of polyamide strip Frame 35 mm / Leaf 24 mm " Maximum dimensions / leaf Width (L) = 3,300 mm...

...Frame Anodized natural aluminum frame. Rounded corners in injected gray polyamide (RAL 7004). A4 portrait or A3 landscape format. Background Made of white shock-resistant polystyrene for indoor use. Front Opening with folding profiles with springs. Document protection by semi-rigid anti-reflective PVC sheet. Base Chrome-plated steel post. Circular base in black lacquered steel (RAL 9005), 35 cm in diameter. Mounting Frame screwed onto a galvanized steel plate, which is itself screwed onto the post. Packaging Frame. Cardboard. Cardboard (screws provided). All wrapped in film. Ref:17604...

...Good UV resistance. Very good abrasion resistance. Rot-proof. White tilting end in polyamide. PE cable. Advertising tarpaulins on tubular frame. Awnings. Pool covers..... Other colors and dimensions available upon request. Deconditioning possible "subject to conditions".

...Cam Lock Stainless Steel MATERIAL - Rotor, stator, nut, and cam made of stainless steel (AFNOR Z 6 CN 18-09, Werk 1.4301, AISI 304). - Key made of polyamide-based technopolymer. - SBR rubber washer. USAGE - 90° rotation. - Protection degree IP65.

...Workshop gantry CMU 2T movable under load Height under beam 2.27 m x Span 2.5m in galvanized steel Used equipment that has been in service for 1 month 4 swivel wheels made of polyamide, 2 of which are equipped with brakes Galvanized finish Compliant with current European standards Made in France SKU: 27436 Nominal load: 2000 Kg Beam width: 110 mm Wheelbase: 1500 mm Max lifting speed: 8 m/min Max steering speed: 10 m/min Weight: 350 kg Additional information: CUSTOM MADE, REQUEST ADVICE...

...This high-quality chassis series has been designed for applications where stricter thermal and acoustic insulation standards are required. The profiles specially developed for this series consist of two half tubular profiles insulated by reinforced fiberglass polyamide strips. Characteristics 65 mm frame profiles and 74 mm sash profiles, available in all RAL colors (Matte, Glossy, LC). Identical...

...frame – 160.6 mm or 251 mm (frame with 3 sliding paths), jamb – 70 mm Profile thickness: door – 2 mm Length of polyamide bar - frame: 35 mm, jamb: 24 mm Maximum dimensions for construction (L*H): 6700mm*3200mm (2-leaf sliding door) Maximum weight/slab: 400 kg Results from testing: Wind load resistance (according to EN 12210:2000): Class C5 Water tightness (according to EN 12208:2000): Class 9A Air permeability (according to EN 12207:2000): Class 4...

...Polyamide fiber 12mm, twisted, finely textured, good color absorption and release, suitable for smoother surfaces, for dispersion and latex paints. Color roller Blue thread 25cm 12mm Item No. 024233 Color roller Blue thread 18cm 12mm Item No. 024234...

...thermoplastic rubber wheels, gray with approx. 85° Shore A hardness, galvanized steel fasteners, transport roller with inner dimensions of approx. 610x410mm suitable for boxes and crates 600x400mm. Floor to loading surface approx. 155mm. Total construction height approx. 175mm, design suitable for the food industry, grid frame for optimal stability, transport roller is stackable with wheels parked inward, load capacity 300Kg!

... -Capacity approx. (m³): 0.3 / 0.5 / 0.75 / 1.0 / 1.5 -Allowed load (kg): 750 - 1500 Options -2 swivel casters (including 1 with brake) and 2 fixed polyamide casters Ø 180 mm, construction height 220 mm -Galvanized cover, opening from 2 sides...

...Grid Cart MR130618-2 Side 1290x665x H1830 mm Mesh size 50 mm Art.No: MR130618-2SR50 Bright galvanized grid cart in size 1290x 665mm (3 standard boxes 600x400 side by side) with 2 side walls and static frame. Ideal shelving cart or picking cart Interior: 1240x620 x H 1660 mm Mesh size: 50 x 50mm Load capacity: 500 Kg (dependent on wheels) Quality wheel set 108 mm Polyamide White with wheel...

...Note The GN 115 locks secure by a rotation of the actuator limited to 90°, which positions the bolt behind the frame. The chamfers on the bolt facilitate the closing of the door. With various angled bolts, a bolt spacing A of 4 to 50 mm can be covered. GN 115 locks are supplied with a loose bolt included. Design Lock housing Zinc die-cast Stop ring Chrome-plated Other parts Steel, galvanized, blue passivated Operating elements Plastic (Polyamide PA) black, matte Cover cap (form RG, KG, HG) light gray RoHS Accessories Socket key GN 119.2...

...The Pilot 250 is a polyamide handheld enclosure for measurement and control technology with ample space for your electronics. It is available in two versions with a closed or front frame cover. On the back, you will find the battery compartment, which ensures necessary mobility. An optional EMC version is available with internal coating and EMC seal. --> Material Plastic (Polyamide) --> Color...

...Our model Leo has been newly designed and is an extremely comfortable chair. Model number: 6112/019 Stackable chair Frame: Beech Square profile Seat: Wooden shell with polyamide gliders Options: Fixed book rack Extendable book rack Button row connection Board row connection Easy glide gliders Seat width: 43.5 cm Chair width: 50.5 cm Seat depth: 41 cm Chair depth: 54 cm Chair height: 88 cm Seat height: 45.5 cm Weight: 5.2 kg Upholstery: With seat cushion...

...Stainless steel trolley 18/10. Frame made of round tubes with a diameter of 25mm. 2 embossed shelves + 4 swivel rubber wheels, polyamide hub. Diameter: 100mm, 2 of which have a stopper. Space between the 2 shelves: 550 mm. Load capacity per shelf: 60 Kg. Delivered assembled.