flat fan

...It is not for nothing that roof structures are referred to as interference surfaces in the PV industry. They make module assignment more difficult and, in the worst case, create shading. When it comes to exhaust ducts, the Marzari flat fan offers the simple and efficient solution to solve all problems and keep the exhaust fan functioning. ITEM NUMBER:MO-4352...

...A special nozzle head with a flat flow channel inside shapes the compressed air stream into a spatula-shaped, flat jet and directs the jet particles broadly onto the surface to be cleaned. This allows for particularly high surface performance. The jet width ranges from 15 to 30 cm, depending on the size of the nozzle head. By using special blasting materials that vary in grain size and type, very different cleaning results can be achieved. Nozzle designation: Flat jet nozzle / Fan jet nozzle Nozzle material: Boron carbide nozzle Nozzle connection: Attachment with a union nut Nozzle size: 22 x 2.5 mm...

...Control Cabinet and Enclosure Ventilation Airflow free blowing: 20 m³/h Airflow with outlet filter: 16 m³/h Mounting cutout: 68 x 68 mm External dimensions: 80 x 80 mm Installation depth: 40.5 mm Filter mat: P15/150S Delivery complete with filter mat and seal Compatible outlet filter: GV 80 Series LV in flat design with quick fastening Also available in EMC version Special colors available upon request Ready for shipment: in approx. 3-4 days Item No.: LV 85 More info: Product data sheet.

...Kelvion's air condensers and evaporators are based on modular concepts. We offer different fan sizes, multiple speeds and suppliers, combined with a wide range of tube and fin profiles, to ensure that the products are perfectly tailored to the application requirements. The extensive selection of fans allows for achieving the optimal balance between volume and air capacity, operational noise levels, and energy consumption to meet market price levels. The tubes and fins can be supplied in various materials, depending on internal or external corrosion properties.

... (no rough edges). Doors with ergonomic handle (non-protruding) and reversible, closure by magnetic "pressure" seal (easy replacement without tools), hinges with 100° stop, closure ensured with automatic return. Micro switch device, allowing the evaporator fan to stop when the door is opened. Standard with key lock. Tropicalized compressor unit (ambient temperature +43°C), ventilated condenser...

... distance corresponds to an area of 1000 x 600 mm. The blowing power, optimized by a variator, allows for the treatment of: - Flat materials in motion - Plastic film during winding or unwinding phases - Shaped parts exiting injection molding - Electrostatic charges in a handling area, preventing electric shocks felt by operators The high-voltage generator is directly integrated into the...

...horizontal exposure area for flat or 3D specimen Fan-controlled BST from 45-100 °C (without chiller unit SunCool) Non-aging reflector and filter system, consistent of selectively reflecting mirrors and a coated quartz Switch-off choices Radiant Exposure or Test Time Base Filter as carrier for additional optical filters Data output via serial interface RS232 Internally integrated Memory Card for Software Updates Light Monitor 300-400nm Light Monitor 300-800nm Humidity Sensor for measuring relative humidity during testing...

...Specifically designed for compact designs, SEPA EUROPE has developed a powerful active cooler that is as small as a matchbox and has a thermal resistance of only 2.5 K/W. The ultra-flat radial fan can be combined with different heat sinks for customized solutions. This product innovation will be presented for the first time at the embedded world 2020 trade fair. Chip cooling using heat sinks...

... both standalone and in combination with a heat sink. CTX distributes fans and blowers from the brand Zaward/Globe Fan. In addition to AC and DC flat fans, this range also includes DC blower fans and the new DC fan "Golf" with a special nub structure on the fan blades.

...A final finishing with printing varnish protects the product from wear. When the folded clapping fan is struck against an open hand, it produces loud sounds that create a well-known atmosphere in halls and stadiums. Clapping fans are made from sturdy cardboard material and can withstand multiple uses. Since they are produced without a plastic coating, any left-behind clapping fans can easily be...

...thanks to the built-in insulation, ensures noise reduction and is also insulated against thermal losses. Flat Design The Fan Coil Venkon XL is optimally suited for installation in the ceiling due to its flat design. It can be flexibly combined with a connection unit for round pipes to direct treated air specifically to ventilation end components. Maintenance Friendly The large removable access...

... backlighting. The latter provides information about the time, room conditions, and the current status of the HVAC technology. A heating/cooling thermostat variant, two heating thermostat/fan coil combinations, and three versions with RS485 Modbus interface allow for flexible adaptation to individual conditions and the integration of JOY into building management systems. Whether operating the thermostat on-site in the room or configuring it with the help of the central unit, controlling the room parameters is simple and precise...

Lechler designs, manufactures, and markets spray nozzles for agriculture. Lechler's R&D team has developed and opened the market for drift-reducing nozzles, which has allowed the company to enhance its reputation and achieve growth in Europe. Our products are available at all agricultural machinery dealerships and on all spare parts resale sites dedicated to agriculture. Our range includes flat fa...

...Axial fan EBM PAPST 5656 S L 135mm W 135mm H 38mm 230VAC 50Hz 30W bearing ball bearing. Connection flat plug 2.8mm...

...The Slim Line includes spring-applied single-surface brakes, where the brake disc is mechanically connected to the shafts to be braked. The brake disc, which is firmly attached to the shaft, can be designed as a motor fan. Due to the design as a single-surface brake, Slim Line brakes are particularly flat. As a result of the principle, a residual moment-free release is achieved...

...Flat jet nozzles create a fan-shaped spray pattern with varying widths and impact forces. The jet cross-section can be elliptical or rectangular. Impact forces and fan widths depend on the nozzle size, spray angle, and operating pressure.

... conventions and can thus be connected to most industry-specific connections. Its design guarantees durability with minimal maintenance requirements. Upon request, models with rectangular/flat protective grilles can be delivered. Accessories: The optional speed control is available via a step switch. Special designs with frequency converters can be produced upon request. Key Data: Diameter of fan wheel in mm: 250 - 630 Airflow from 1000 - 12000 m3/h...

... injuries - Advanced security lock system for the cabin, signal and power connection, saving on labor costs - The cabin stands upright, and is classified on the ground thanks to the feet, - 4 pcs Fast Fan Cooling - Lower energy consumption, Video - Wide viewing angle - Clear image with the camera - Intelligent high refresh rate, - Intelligent high brightness technology, - 14 bit / 16 bit / 18 bit...

...The Mega Series enables particularly economical and fast cleaning of loose material such as sand and debris in DN 250-2500. The use of a swivel joint increases the performance even further. The special arrangement of the nozzle inserts creates a fan-like jet that provides the best possible coverage of the pipe bottom. up to 250 bar:1/2" 3/4" 1" 1 1/4" DN 100 - 2500:4"-100"...

...Wooden block, headless screw, and steel fender washer. Brass nut and washer. Wooden block, headless screw, and galvanized fender washer. For the protection of installations and individuals. Connectors for grounding aluminum profile constructions and for connecting aluminum profiles to each other if integrated into the protective conductor system. The conductive contact occurs through the defined destruction of the anodized layer at the bottom and on the sides of the groove. The cable lug must be placed between the fender washer and the flat washer during assembly. Reference: 10470...

...Wide capacity range dry cooler series, which can be used in waterloop systems or as a free-cooling option in chillers. This small to medium capacity product is perfect for small and medium commercial buildings and various supermarkets. Available heat capacity is up to 350 kW under nominal conditions (when ETG is 35%, Tin is 45°C, Tout is 40°C and Tamb is 35°C). Flat shaped simple construction is assembled with smooth copper tubes, aluminum or copper fins and EC/AC fan motor technology. The galvanized steel and powder coated frame can be designed in horizontal or vertical position.

... compact and robustly designed. Flat characteristic curves allow for a wide variation of the volumetric flow rate at constant pressure increase. Venti manufactures high-pressure fans in a solid welded construction. The spiral housing of the single-sided suction radial fans is rotatably arranged in front of the motor block. This allows for the positioning of the fan housing in 45° increments.

...Flat fan evaporators for cooling furniture and small cold rooms Finned block • Cu-DHP pipe Ø 10 mm • Pipe spacing 35 x 18 mm, staggered • Fins made of aluminum • Fin spacing 4.2 mm • Powder-coated Housing • Aluminum • EP coating RAL 7035, impact and scratch resistant, acid resistant, food safe Connections • Cu-DHP pipe Ø 10 mm Fans • SKM | SKW: 1~230 V, 50/60 Hz, power consumption 14 Watts...

... of 6mm heat-treated tempered glass. The tempered glass can be opened and closed by moving it up and down in a guillotine style. It is equipped with a counterweight system to facilitate smooth movement. Control Panel: There are flat-type standard control panels on both sides of the fume hood. Since these panels are not located below, they provide a working opportunity closer to the user. One of these panels contains gas and water valves, while the other is equipped with protective fuses, a lighting switch, sockets, and a fan motor speed switch.

...KNX Raptors (Actuators and Sensors), Fan Coil Controllers KNX, Flat Cable Systems for Building Automation KNX, Feed and Distribution Boxes, Pre-assembled Connection and Extension Cables.

... Maximum diameter : 1100 mm Core diameter : 70 / 76 mm Minimum slitting width : 17.4 mm (*15.0 mm with knife holders with 10mm thickness) Maximum slitting width : 250.0 mm (Rewinder) Maximum diameter : 300 mm Core diameter : Min. 11.5mm, max. 76mm - Automatic warning stripe at reel ends - Trim removal system for removing trim from both sides of the web, complete with motor fan and necessary piping - Pressing function to make reel ends flat - Packing machine *All machine or equipment is offered as is where is with all faults without warranty and is subject to prior sales.

... - Stainless steel body - Foldable flat handle - Easy access to the filter - Long lifespan Data... Dehumidifier type: DR-20B Nominal capacity (kg/h) 20°C-60%RH: 0.8 Dry air flow (m³/h): 330 Humid air flow (m³/h): 60 Regeneration power (kW): 4.5 Electric consumption (kW): 1.20 Fuse 230V / 50 Hz (A): 10 Weight (kg): 15...

... values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Input voltage: 100-240 V •Storage temperature : -40°C - 70°C •Input tolerance: +10% / -10% •Working temperature: 0°C - 80°C •Humidity: 5% to 95% •Standard: IEC60601-1 •Frequency: 50 / 60 Hz •Family : OF65 •AC Input: flat pin connector •Output voltage tolerance: +2% / -2% Type:AC/DC Other characteristics:with short-circuit protection,for medical applications,for medical applications,open frame...

...Biological plastic made from renewable raw materials such as clover or corn; can later be decomposed naturally! >> Compact hair dryer with 2 heating and fan settings >> Overheating protection >> Flat nozzle >> Hanging loop >> 230 V~ 1200 W...

...surface grinding, effect grinding, faceting, matting, satin finishing, polishing, and for working on hard-to-reach areas. D+L supplies flap grinders with grinding cloth (standard corundum, zircon, ceramic, silicon carbide, 3M-Trizact), with non-woven fabric (standard corundum and zircon), and felt with standard shanks of 3/6/8 mm as well as with special shanks (internal-external threads, long shank) in the following designs: - with flat end face - in top shape - with slotted lamellae - in mini format...