...Father part - Type A - with internal thread - stainlesssteel - according to EN ISO 14420-7
This coupling is very quick and easy to connect and disconnect.
User-friendly with levers, no tools required!
You can obtain the complete Camlock program from us.
For certain quantities, custom designs and modifications are also possible.
Standard: EN ISO 14420-7 (formerly DIN 2828)
Variation: Father part Type A with internal thread
Material: Stainlesssteel (AISI-316)
Optional: Various sealing qualities for the mother part...
...
Hose connection made of stainlesssteel 1.4571 ¾", with PTFE seal and nickel-plated brass union nut (female thread 1¼")
Barrel screw connection made of nickel-plated brass, with locking device
Thread adapter made of PE, brown
1. Thread: 2" BSP fine, internal thread
2. Thread: DIN 71, internal thread
Potential equalization cable set
We would like to point out that when pumping flammable media or using in explosive environments, a potential equalization must be established.
Further links to "StainlessSteel Hand Pump JP-05 for Flammable Media, for Canisters"
Questions about the item?
...Stainlesssteel socket shut-off valves and socket slide valves for opening, closing, or throttling the flow of media
Socket shut-off valves, straight or angled, in sizes 1/4" to 2" female thread, as well as socket slide valves in sizes 3/8" to 2 1/2" female thread
Socket shut-off valves and slide valves are equipped with an internal thread according to ISO 228. To seal the threads, you will additionally need a thread sealing material, such as PTFE thread tape or hemp combined with a thread sealing paste.
The valve can be opened, closed, or throttled via a handwheel. The handwheel is painted red.
...This machined 316L stainlesssteel reducer allows for the reduction of a thread and adapts the connection in a fluid network. It is available for threads ranging from 1/8" to 3".
Available diameters: from DN8-6 to DN80-65
Thread type: Gas or NPT
Nominal pressure of the reducer at 20°C: 20 bar
Nominal pressure of the reducer at 100°C: 16 bar
Standard: ISO 7-1 (except NPT)...
... steel threaded adapter is electrically conductive and highly resistant to chemicals. Therefore, it can be used for transferring solvents and other flammable liquids (e.g., alcohols, gasoline, diesel, etc.) as well as for weak bases and acids.
Material: Stainlesssteel 1.4301 (304)...
...StainlessSteel Guillemin Female Thread
Material:stainless steel
Sealing:NBR
Working pressure:16 Bar
Connection:Female thread
Diameter:1.1/2'' to 4''...
...The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainlesssteel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainlesssteel, NiroTherm® offers installers therefore a real...
...Discover hundreds of jewels in our collection dedicated to stainlesssteel, from our One Man Show jewelry brand.
We offer models for all types of women's steel jewelry, including rings of course, but also earrings, chains, pendants and bracelets. We offer models in both white stainlesssteel (steel color) and gold-plated steel, particularly elegant for female customers.
The current trend is...
... female piece, a threaded male piece, a nut, and a gasket (EPDM or NBR) in D shape.
We offer a complete range of DIN 11851 fittings made of stainlesssteel 316L (1.4404) sourced from Europe, machined in France by BEAL INOX.
...Threaded ALU tank caps, made of aluminum or stainlesssteel, complete with various types of sealing gaskets depending on the fluid contained in the tank.
They are available in the following standard thread sizes:
- 1" male and female
- 1" 1/2 male
- 2" male and female
- M60X2 female
- M80X2 female
ALU filling caps can be either airtight or ventilated.
With the exception of the 1" ALU caps, all...
...In stainlesssteel 316 L - To be used from -40°C to +400°C - < -45°C: prohibited Female lifting ring in stainlesssteel from 0.6 to 3.5 t Stainlesssteel accessories are particularly suitable when used in the following environments: Industrial atmospheres and...
...All gangways have installed aluminum men fixing part Ø 25 mm.
- This is standard female deck fitting.
- With this fitting gangway can have a different inclines.
- Material: stainlesssteel...
...• the male DIN stainlesssteel fitting, which has a tapered end and either a welding or a swaging end;
• the female DIN stainlesssteel fitting, which has a DIN 405 thread on the outer part and either a welding or a swaging end;
• the DIN swivel, which is a nut with a DIN 405 thread on the inside, used to keep the male and female fittings together;
• the DIN gasket, which is placed between the female and male stainlesssteel fittings.
This type of fitting can be opened as needed simply by loosening the swivel.
...°). In the case of CANopen, one connector or one male/female connector combination can be selected optionally for connection purposes. Casting measures in the housing lead to the achievement of protection class IP 69K, e.g. for use under water.
Interface:CANopen
Housing material:Aluminium AIMgSi 1, Stainlesssteel 1.4305, Stainlesssteel 1.4404
Design:65mm, 66mm
Electrical connection:Cable 1m, Device connector M12...
...Material
StainlessSteel V4A (AISI 316)
Surface Finishing
-
Standard Seal Material(s)
FKM (Viton®)
Working Temperature
-25° C ... +200° C / -13° F ... +392° F
Valve Design
Poppet Valve
Connection
Screw
Disconnection
Screw
Connect Under Pressure
Male Tip and Female Body allowed
Application
Industrial Hydraulic, Offshore, Rescue and Tensioning Hydraulics
ISO Interchange
-...
... measured in inches) » High-quality stainlesssteel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised lengths up to 2000 mm
Article number:MS022NdA-06rh00
D mm:22
L mm:100
Thread MxL:M6x6
Temperature °C:80...
... moreover available in inch dimensions and – as special version – with a stainlesssteel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes.
igubal® rod end bearings - Applications
igubal® rod end bearings - Applications
Temperatures Dimensional series K in A+B variants for temperatures upt to
+200°C (HAT material).
...Black thermoplastic.
Steel grade 5.8 or stainlesssteel 1.4305.
Version:
Metal parts trivalent blue passivated steel or bright stainlesssteel.
Note:
Star grips with projecting steel bush and blind hole or female thread are especially suited for cross pinning.
Drawing reference:
Form H: bush with blind hole
Form K: tapped bush
Form L: external thread
Reference:06210
Form H:bush with blind hole
Form K:tapped bush
Form L:external thread...
...Camlock couplings are available in different dimensions for coupling stations. They are suitable for tube diameters from 40.0 / 50.0 / 60.3 and 65.0 mm and have the following characteristics:
male parts in aluminium
covering caps in aluminium
female part with hose connector in aluminium or stainlesssteel...