dry-running properties

... stability and high temperature resistance, a low coefficient of friction and high wear resistance under dry running or high mechanical loads are required. The advantages of our sliding materials over conventional thermoplastics are based on lower thermal expansion and no flow behavior under high mechanical stress. Depending on the temperature application, different composite systems based on isostatically pressed fine-grain graphite, CFC (carbon fiber reinforced carbon), thermosetting composite materials with high-temperature resin bonds, and...

...The B2 Vario pump set is suitable for thin, watery to slightly viscous media. The set is designed for extracting small containers such as canisters, hobbocks, and barrels. The pump is flexible at all times, conserving important resources. * Stepless speed controller for transferring and filling small quantities Features & Benefits * Seal-less design (DL) ensures dry running safety * Continuously...

...The perfect format for maximum dry keepingThe industrial condenser dryer DH 310 which can also be supplied in a stainless steel housing is characterized by a high dehumidification capacity, reliable continuous operation properties and practice-oriented equipment options alike. Designed for the operation whilst positioned on the floor, the device – given on-site preparation – can also easily be...

...FLUX air-operated diaphragm pumps are self-priming and protected against dry running. The pumps are distinguished for their versatility and can be used for virtually all types of media. Available in heavy duty (RFM) or injection-moulded/cast (FDM) version for a huge diversity of applications they are designed for high pressures of up to 8 bars and in addition to other properties they are...

...grease 800 is a H1 registred, high-performance grease with a soft consistency. The thickener of grease 800 is PTFE. Therefore, it provides excellent dry-running properties. The operating temperature range of grease 800 is between -30°C and +280°C, but should preferably be used at temperatures above 70°C, because from this point on the lubricant provides the best performance. ...

...Lubrication of chains, fringe bearings, hinges, joints, clamping and drying frames or slideways at higher temperatures and loads For conveying systems under radiation heat in painting, stoving and drying systems Advantages and benefits Highly effective due to finest, homogeneous MoS₂ distribution in the oil Emergency running properties through MoS₂ at dry running Outstanding adhesion and...

... with low fuzz properties. ENHANCED PRODUCTIVITY Available in 32 kg doff size. Reduced coating – lower consumption of chemicals for coating. Reduction in wastage and downtime. Helps to increase line speed. Labeling Each individual package is labeled with information including product name, Tex/yield, production plant, production date, and weight (*Taloja). Storage It is recommended to store glass fiber products in a cool, dry area. MANUFACTURING LOCATION:Taloja TEX RANGE:600 to 2400 Tex PACKAGE WEIGHT:25kgs/32kgs...

...Sliding layer made of PTFE and additives approximately 0.01 to 0.03 mm thick, porous layer made of sintered bronze approximately 0.20 to 0.35 mm thick, steel backing plate, corrosion protection layer made of tin • RoHS compliant • low friction coefficient and wear • well suited for rotation and oscillation • suitable for dry running and hydrodynamic operation • good sliding properties (no stick-slip effect) • does not absorb water, therefore no swelling • resistant to many chemicals...

...Fast Dry Series Our Fast Dry series is an extremely fast-drying sealing lacquer system, characterized by excellent anti-flow behavior and good adhesion properties. Properties - Extremely fast drying - No running - Non-conductive - Good media resistance Packaging and suggested screw sizes - Tube 20 ml for M3 - M24 - Tube 50 ml for M12 - M48 - Cartridge 30 ml / 50 ml for M1 - M48 - Can 1 kg...

...Starting with the base polymer TECASINT 1011, TECASINT 1061 with 15% graphite and 10% PTFE has been developed. Its properties include very low static friction and a low coefficient of friction. The material is self lubricating, which means it also has good properties in dry running conditions. TECASINT 1061 is suitable for low friction and low wear applications at medium temperatures (<200°C) and loads.

...Liquiphant FTL33 is a level detector for liquids. The FTL33 device is specially designed for applications in the food and beverage industry that require hygienic standards. The Liquiphant device is used as a prevention against overflow or as protection for pumps against dry running, preferably in storage tanks, mixing vessels, and pipelines. Compact: — The smallest vibrating fork sensor on the...

...Additional polymers add to the low-friction dynamics. THE ADVANTAGES AT A GLANCE: - Special product with MoS2 low friction formula - Highly effective at reducing friction and wear - Decreases fuel consumption - Decreases frequency of repairs - Ensures easy gear change and noise reduction - Increases endurance of the gearbox oil base and enhances dry-running properties...

...Spring-supported Nutringe (Varioslide®) are specifically designed for sealing pistons and rods. They are used in rotary-oscillating movements as well as in static applications. Advantages: • Low friction and wear • Excellent dry running properties • High chemical and thermal resistance • Optimized friction and pressure ratio (from vacuum to high pressure) This is achieved by tuning the spring...

...Plunger oil (lubricant) with ultrafine graphite for extremely good adhesion Type medium-viscous graphite oil Appearence black Application drip, spray suitable for "vacuum" die casting Properties and Advantages • well balanced tribological characteristics • despite 10 % graphite in medium-viscous oil product is sprayable and perfectly stable • high pressure resistance • highly efficient, economical in use • protection from erosion • dry-running operation feature • recommended for Caro-Prometa plunger systems...

... substances. Due to these properties and their low particle wear, hybrid thin-section bearings are ideally suited for vacuum and cleanroom applications. Advantages and Features of Hybrid Thin-Section Bearings • Corrosion-resistant • Nearly wear-resistant • Low lubrication and dry running • High-temperature resistant • Cleanroom compatible and vacuum suitable...

...Compact level probe with stainless steel housing for liquids The Liquiphant FTL31 is a level probe for liquids. The FTL31 is designed for industrial applications, such as on machine tools. The Liquiphant is used as an overflow protection or to prevent dry running of pumps in cleaning systems. The IOLink function simplifies the configuration. Compact The smallest vibrating fork detector on the market Safe Continuous self-monitoring Reliable switching, insensitive to product properties Simple No calibration Plug & play IOLink connectivity...

... Agitator supported at the rear, with externally exchangeable mechanical seal Entirely welded agitator design, without any bolts, without pockets and with all edges rounded for good cleanability Minimal build depth, thus very good accessibility for inspection and cleaning purposes Excellent cleanability using CIP systems, simple validation Available with separating wall between process and mechanical areas Double mechanical seal, externally interchangeable, dry running contacting or non-contacting lift-off type seals as well as liquid lubricated seals...

... resistance - Applicable with little to no lubrication - Extended lifespan of both lubricant AND ball bearings High-temperature applications: - Thermal engineering and raw materials industry - Chemical process engineering - Pharmaceutical and food industry Main properties and advantages: - High heat resistance - Suitable for dry running - Chemical resistance - High wear resistance...

...Plate link chains elegantly combine the advantages of steel and plastic. The transmission of chain pull forces in plate link chains is achieved through high-quality, specially adapted ELITE roller chains. The load is carried by the product mass using plastic flights, which are mounted on the base chain according to order specifications. This allows for the utilization of the dry running...

... PROPERTIES (depending on bronze alloy): ♦ for dry running and grease or oil-lubricated applications ♦ under low sliding loads | good sliding properties ♦ under high loads | for medium and high loads ♦ good corrosion resistance, even in seawater...

...Suitable for all rotating and moving parts. Ideal for silent hinges and low-speed machines. Electrical insulation between shaft and bearing housing. Material: PA 6.6 Colour: natural Due to its gliding properties and high wear resistance, polyamide is also very applicable during dry running. Resistant to fouling, atmospheric influences and to the majority of chemicals. After assembly the bearing clearance is approx. 1% of the shaft diameter. Further types or materials on written request.

...Piston and rod seals offer significant advantages in sealing static or moving pistons and rods, either as spring-supported sealing rings or as memory seals. Spring-supported sealing rings with excellent dry running properties, low wear, and low friction. No stick-slip effect - even at low sliding speeds. High shape stability and very high chemical as well as thermal resistance. Medium: at high pressures.

... System), the ingress of the medium into the gearbox and the gearbox oil into the pump chamber is prevented. These measures, along with insensitivity to dry running, help to prevent potential operational interruptions and the associated costs. With a TORNADO® pump, you thus enjoy maximum operational safety at all times. Another advantage of the T1 rotary lobe pumps is their modular design: pump...

...TEFLON / PTFE SEAL for Chemicals. The rotary piston pumps are equipped with a VARI - LIP - SEAL made of PTFE with stainless steel or carbon. This seal can be used for abrasive, highly viscous media, but can also take advantage of the sliding properties provided by PTFE to pump thin liquids such as acids and alkalis, even allowing for dry running up to 10 m/s. PTFE does not age and can be used...

...Leggings models that you can use to create beautiful combinations in every moment of your life, whether at the gym, at home, or at work, are coming to your feet with the privilege of belkorsesi.com. These products are especially designed for athletes, featuring moisture-wicking properties that keep you dry while running and can expel sweat when it forms. We can produce and send you as many products as you want, whenever you want. It’s completely in your hands. All leggings models are available in stock. Belt Corset...

...Properties: ALDOVET AIR is a liquid flavoring agent based on essential oils, for dispensing in trough water, running feed and dry fodder for livestock. Its characteristic freshness influences the fodder agreeably by improving its taste and aroma. Application: ALDOVET AIR can be applied as an additive for trough water, in running or dry feed or by nebulization within the animal house.

... longer. Some customers are looking for proven solutions for brittle nails, others want to refresh tired and dry facial skin, while others are interested in restoring damaged hair. Some oils, for example, are used for relaxation massages. The assortment also includes tools, packaging, and accessories necessary for running a business in the cosmetics industry. Customers appreciate the option to order...