concrete laying

... dust and increases the resistance to abrasion. Increases flexural strength and prevents cracks from expanding and contracting. Increases the resistance to the effect of hydrochloric acid and reduces shrinkage in the setting of cement. ANTIGREX creates waterproof coatings on walls, basements, tanks, etc. It is suitable for the construction of industrial floors in warehouses, factories, etc. It helps to smooth the floor surface before laying tiles, slabs. It is suitable for repairing damaged concrete parts (eg stairs). PACKAGE:1 LT, 10 LT, 4 LT...

... accelerated grip and fast hardening. Applied prior to laying the flooring, it is perfect for levelling at thickness ranging from 3 mm to 20 mm so as to adapt to any type of covering. Floor Level is a self-levelling modified-polymer cement mortar with fibre-reinforcement, offering accelerated grip and fast hardening. Applied prior to laying the flooring, it is perfect for levelling at thickness ranging from 3 mm to 20 mm so as to adapt to any type of covering. Packaging: 25 kg bag UM: €/kg...

... workability features of asphalt up to the laying point. These silos provide a controlled environment that avoids cooling or solidifying too early in the asphalt, very essential to its usability during transportation and application. Primary function: These hot asphalt storage silos hold asphalt at a temperature of application on road surfaces and other infrastructure projects. Hot Asphalt Storage Silos are generally in the form of steel construction, insulated to retain heat. This setting makes the asphalt mix hot and ready for instant use in any construction process...

...Bitumer Primbit R is a high-quality solvent-based asphalt solution with additives. It is used to prime the surface of a structure before applying the actual asphalt insulation and to maintain corroded concrete surfaces. It is an adhesion-enhancing and priming compound for asphalt masses. •ready for use after mixing, • waterproof, immediately after laying on the surface to be insulated is...

...PAVELITH® InterLay NP-1 is used as scratch and layer protection applied on-site with good hydrolysis resistance and low water absorption. PAVELITH® InterLay NP-1 is a mix of biodegradable polymers and natural minerals. The granulate should be applied right before packaging (horizontal laying) between the blocks or slab layers. ...

... bituminous tape is made with bitumen, aluminium foil and silicone protection. Conformity RINNO bituminous tape comply with current standards DTU 43.1. Self adhesive bituminous tape Place the tape on a dry and clean support. Adheres to most building materials wood, plastic, glass, concrete, metal. Ideal for wood, roof, piping, framing… Robust, the band is tearproof and nondeformable. Reduce resonance when walking on the terrace. Protects and extends the service life of the joist structure. EAN:9503626691351...

... bricks, cement and lime-sand blocks, roughened concrete • Suitable for all types of machines for fine plasters Advantages: • If processed with a water scraper, high smoothness is achieved and there is no need for additional skim coating • High content of gypsum for maximum elasticity TECHNICAL INFORMATION: In compliance with EN 13279-2:2014 : Type B4/50/2 • Paper bag: 30 kg • Mixing Ratio: ~ 18 l water: 30 kg • Coverage: ~ 3.5 m²/ 30 kg • Consumption: ~ 8.5 kg/m²/10 mm • Bond strength: 0.15 MPa • Bags per pallet: 40 pcs • Pallet weight: 1200kg Sizes (kg):30...

...Characteristics TechRevetment™ is also flexible in nature and can adapt as per the soil contour of the bank slope or channel bed. The installation process is faster than the conventional concrete or boulder pitching and gabion laying. It delivers the durability and performance of concrete without the costly, time consuming and difficult installation process of a conventionally-formed concrete...

...Especially ideal for laying concrete pavers on patios and balconies. Concrete and natural stone slabs can be laid quickly and precisely. Our pedestal support with four separately adjustable support points, various positioning lugs, and integrated locking mechanism can be increased to at least 260mm overall height by combining with various VOLFI System components. Pro Tip: VOLFI 4-C Pedestals are probably the only supports making it easy to use slabs of different types on the same raised flooring. ...

... : Up to 5mm thickness with no cracking. APPLICATION Application is carried out manually, spreading the thinned the product with a coating knife across 10 or 15 cm, before laying the tape in position. In the event of projecting vertical angles, use reinforced tape (frame placed at the side of the panel). Apply tape to the internal ceiling corners, making sure that the concrete is free of any trace of forming oil. The surface must be dry and free of any type of powder or insufficiently adherent product.

...Double-sided installation. Easiest assembly by laying edge to edge. Suitable for flat and secured substrates, concrete, concrete block paving. Custom dimensions are possible: e.g. width 1.00 m or 1.10 m and length up to 2.00 m. Dimensions: One side with a coarse hammer finish, one side with wide grooves. 18 mm thick, black. Mat size: 1.00 m x 1.50 m 1.00 m x 1.65 m...

...YB-1220 represents a new high-tech type of movable egg-laying concrete block machines, produced by Namtas since the beginning of 1980-s. This machine features high throughput and robust easy-to-use design. The machine moves on wheels along straight line on flat even concrete surface according to the specified program while moulding hollow, solid or insulated wall blocks from 185 to 300 mm in...

...In industry jargon, it will be referred to as 'Concrete at 300 kg or 350 kg'. This is a standard concrete. Application: Any application of basic concrete, such as for laying curbs, etc., depending on the desired strength.

...In industry jargon, it will be referred to as "Concrete at 300 kg or 350 kg". This is a standard concrete. Application: Any application of basic concrete, such as for laying curbs, ..., depending on the desired strength.

...Installation of hemp-lime mortar (between 3 and 8 cm) directly on the existing floor with incorporation of technical conduits. Installation of battens (thickness: 25mm) for parquet fixation. Laying of the floor covering (terracotta, parquet, etc.). Types of Technichanvre Concrete: Technichanvre® Hemp Concrete C020 Reference: MAT-B-BE- B200201...

...In industry jargon, it will be referred to as "Concrete at 300 kg or 350 kg". This is a standard concrete. Application: Any application of basic concrete, such as for laying curbs, ..., depending on the desired strength.

As Ek-Ta Engineering, we have been a company in the construction sector for nearly 27 years, undertaking numerous projects with high quality standards (CE). Additionally, we design and produce projects according to customer requests. Our vision for 2020! To produce small machines with a win-win approach in collaboration with other countries. About us.. We are a manufacturing factory with nearly ...

...The E-12 is a block machine that uses a technique known as “egg laying,” where the block machine moves and produces concrete block products on the ground to dry – We offer the machine in fully/semi-automatic modes. With the SUMAB E-12, the following concrete products can be produced in an efficient way: • Hollow block stones • Solid block stones • Chimneys • Light weight blocks • Paving...

...-generation machine. Over an average duration of 8 hours, it can produce between 10,000-11,500 pieces of 20x20x40 cm blocks and 700 m² of interlocking pavers. The blocks, which are printed on the pallet, are transported to the drying area using wheelbarrows. Working with a reduction motor, it brings the empty pallets to the press one by one, and then the pallets exit with the chain system. In 1 hour of production, 100 - 120 pallets. For installation, only a space of 2,000 m² is required, and 1/3 must be covered with concrete. Cycle time: 30-35 seconds.

...) - Daily Capacity 2.500 Hollow Blocks of 20 Cm - 1000 m2 Construction Area - Totally Needs 4 kW Energy - It Is An Ideal Machine That Can Be Able To Produce With Max. 4 Persons - Designed To Work 24 Hours. Through Special Vibro Motors Machine Can Produce Every Stone Which Heigh Between 18 / 25 Cm. Video of machine: https://www.youtube.com/watch?v=VQ_2iQm_C0U&t=5s concrete block machine - Hollow block machine - bricks machine - Cinder block machine - Hollow brick machine - Concrete batching plant Optionally...

...ABES Poller 016 is a cylindrical barrier post made of aluminum casting with a cylindrical base. Mounting Designed for removal using 3p technology, consisting of a ground sleeve, a connector with a predetermined breaking point, two clamping cones, and a hex screw. Alternatives: Version for embedding in concrete or laying down. Option Ground Rosette (000.031) Execution – Powder coating in...

...BORNIT®-Speedbit-Primer is used as a bonding agent when laying roofing and welding membranes, particularly when faster construction progress is desired due to shorter drying times. The product is versatile, as it adheres well to a variety of substrates, such as plaster, concrete, masonry, metal, bitumen membranes, and bitumen-compatible high-polymer roofing membranes. It is mainly used in new...

...SLEEPER SCREWS DEFINITION OF THE PROFILE IN ACCORDANCE WITH THE TECHNICAL SPECIFICATIONS OF NF F50 - 006 • designated by the diameter D and length apart from the head L, expressed in mm. • used for fastening to a wooden sleeper: • either in direct laying, by tightening on the rail foot, • or through the intermediary of chairs or clips. DIRECT LAYING It is advisable to use 3 sleeper bolts per rail, making 6 per sleeper, positioned in alternating triangles. • It is possible to use them on concrete with a matching threaded fitting or polypropylene plug. Protection Plain or galvanised...

...-marble - Swimming pool construction - Aluminum - Door-window (wood) - Animal shelter - Channel - Tile laying - Stair railings - Tiles, granite ceramics, wall cladding - Exterior insulation cladding - Factory construction - Factory site concrete - Apartment renovation - Cottage construction - Village house construction - Turnkey construction - Turnkey apartment renovation - Prefabricated cottage construction - Fine construction subcontracting...

... access covers. Extremely easy to open thanks to gas-lift struts. A safety device is fitted, locking the cover in the raised position. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect...

...For laying in ground, open air, in concrete, inside buildings, in cable channels, in electrical stations, in industrial plants and in the commutation systems where there is no danger of mechanical damage of the cable. Because the permissible operating temperature of the conductor is + 90 0C. Core isolation (XLPE) polyethylene provides higher current loadThe aluminum cores with section 2,5-16mm2...

... decorative forms, such as suspended bathtubs and sinks, laying tiles in a (checkerboard) pattern on walls, architectural concrete, and mosaic installation. We specialize in the installation of large-format tiles. We offer tiling (cutting) at angles, linear drains, and tiled shower trays, as well as assistance in bathroom design, providing technical support to adapt your bathroom project to the technical conditions of the existing space. We perform waterproofing and install cabins and trays lined with tiles. We lay tiles and bricks horizontally in a herringbone pattern and in every possible way!

...suitable for: – Asphalt processing in the construction industry – for laying wash concrete slabs, – interlocking stones, paving stones – for spreading in winter...

...We install edge protection in conjunction with side protection nets according to EN 1263-1 on concrete and steel beams for securing roofs with a slope of up to 20 degrees. When laying roof elements and during other roofing work in the hall area, the issue of edge protection on the outside arises in addition to fall protection inward (into the structure).

...In the used machinery trade of Brand GmbH, there is a wide selection of affordable hydraulic items. You can purchase tested hydraulic units in various designs and hydraulic cylinders in different sizes at Brand GmbH, as well as hydraulic equipment for laying concrete pipes, oil changes, flushing devices, or pressing lines for hydraulic hoses. The range of Brand GmbH includes, in addition to...