concrete fibres

... Typical applications include the production of concrete tunnel segments and other precast concrete elements. The use of Durus S500 instead of steel fibres eliminates any risk of injuries to manufacturing operatives during dosing, de-moulding and handling of precast elements. Compliance with health & safety requirements during the production process and on the construction site are thus greatly improved. ...

...Readymesh PW-120 is an auxiliary fibrillated polypropylene micro-fibre, with a length of 12 mm, suitable for adding concrete in general. The addition of Readymesh PW-120 to the mixture allows for preventing the phenomenon of cracking from plastic shrinkage of the concrete, as well as having positive effects as regards the ductility of the mixture, the resistance to freezing/thawing, the shock resistance and overall watertightness.

...GOONVEAN FIBERS provides a range of precision short cut fibres for use in adhesives, epoxy resins and sealants. These materials have a number of advantages such as reinforcement, fire resistance, flexibility and added strength. Among others PE, PP, PA, Cotton, Aramide etc. with a range of fiber length. Adhesives sealants and coatings:Pan1 Acrylic flame retardant fibre Building and refractories:cement and concrete Plastics and PU:strenghening, flame retardant and light weight Rubber:Nylon and polyester...

We are Europontex, an independent agency established in the Portuguese market for three generations, since the early days of steel trading in Portugal. With a solid experience over time and a constant business intelligence activity, we have developed a deep understanding of the market and the products. We have expanded our horizons beyond borders, serving not only the domestic market but also nei...

...calcium carbonate, dispersant, bactericide, fungicide, cellulosic fibres, polyacrylates, clays, acrylic dispersant. AMOUNT REQUIRED From 2 to 4 kg for the first coat. From 1.5 to 2 kg for the second coat. APPLICATION SEMIN AIRLESS EXTREM filler is sprayed using the Airless pump or rotor machine/Flat spray stator in 2 coats. The first coat must be levelled using a 60 cm blade or levelled with a straight edge. After drying, the second coat must be smoothed using a blade.

...We can produce different lengths 6mm, 12mm, 18mm and 24mm Usage: Glass fiber is suitable for use in waterproof plasters, cement-sand screeds, monolithic filling of external and internal walls, and structural thermal insulation. In industrial and housing construction. Recommended for the production of foam concrete paving slabs, and concrete plates. Ideal for underfloor heating systems. If you are interested in cooperation or have any queries, please feel free to contact us at +380 93 53 13 653 (WhatsApp, Viber)/ email: rebar.union@gmail.com.

... concrete, for mechanical and manual application. Use as Intofin Flex or Intoras flex finish. Packaging: 50 Lt Sacks-55 sacks Footboards Usage: Indoor/outdoor Color: Grey Particle size: ≤ 5 mm Yield: 1 bag for 1 sqm thickness 4 cm Vapour resistance coefficient EN 1015-19: μ = 9 Capillary water absorption EN 1015-18: Class "W1" Certified Thermal conductivity: λ = 0.07 W/MK * Specific weight dry mortar: 350kg/M Minimum recycled/Recovered quantity: ≤ 10% * Certification: Politecnico di Bari certificate n ° 93/870 Complies with minimum environmental criteria (CAM) DM 11 october 2017 Point 2.4.2.

...Woven polyester geotextile 50/50 Geotextile application - Construction of highways and railways; - Arrangement of temporary highways and pedestrian zones; - Reinforcement of soil embankments and slopes of roads; - Concrete cover; - Landscape design; - Drainage; - Isolation and ballasting of main pipelines Surface density 160 g/m2:Width 340 cm...

...Self-levelling mortar based on cement, reinforced with fibres, modified by additives that give it the ability to be fluid and pumpable, especially intended for screeds and levelling of coverings with a thickness between 5 mm and 50 mm, which, once hardened, must be covered with coverings. USES Applicable on concrete or cement mortar supports. On supports with low porosity, apply a Fixmar Primer...

... configuration and complexity. — high temperature resistance — high temperature of liquid phase formation — high mechanical strength — high temperature of onset of deformation under load — does not contain substances that cause allergic reactions — resistant to molten metal, acid and alkaline slags Main application: ferrous, non-ferrous and glass industry, lining of melting aggregates in the production of mineral fibres etc.

... composite face material helps to protect the plywood against swelling. The composite material is ecologically safe and recyclable. Overlay The composite material is made of wood fibres and polypropylene. The overlay is glued with D3 or D4 class glues according to the standard EN 204 requirements. The thickness of the overlay is 1.6 mm. The surface is glossy or mat. The surface of this material resists...

... substance that has the capacity of colouring a certain carrier (cement, plaster, synthetic fibres, paint, …). Contrary to dyes, pigments are insoluble. Therefore, pigments remain under the form of small particles and will just be dispersed in the carrier and so colouring the carrier. The colouring capacity of the pigment depends on the fineness of the particles composing the pigment. In general...

... concrete with a density of 900-1100kg/mc. FIP and TECNOACUSTICA offer a noise barrier consisting of a 100mm-thick prefabricated structure of self-stable reinforced concrete and a Greek-fretted facade made of lightweight concrete panels with expanded clay and/or mineral wood fibres for a total thickness of 120mm.
The standard length of panels is 292 cm, which permits a typical centre distance of 3 metres. In terms of height, standard measurements of individual panels are 1.5 metres and 2 metres. Panels are fitted onto metal frames that are dimensioned so as to withstand the stress resulting fro...

OCV Italia has two production sites in Italy, located in Besana in Brianza. It has always specialized in the production of glass fibers for the reinforcement of plastic materials. The products are present and well-established in various sectors: transportation, concrete reinforcement, electronics, automotive, consumer goods, sports, and textiles. The company is committed to producing at the highest levels of quality and to researching innovative technologies and applications, energy savings, environmental protection, and safety.

...the preparation of a report and the creation of a DVD both intended for insurance purposes, as well as the repair of identified defects; the construction of reinforced concrete structures; the study and execution of complex and large-scale projects; your earthworks; blowing of microtubes; blowing and welding of fiber optics of all models. Our specialists place the utmost importance on site safety, culminating in VCA certification. We always offer you a very high level of quality/price ratio.

... levels the pith is dried in 10000 Sq.ft. concrete yards. The dried material is sieved to remove the short fibres and then compressed in to 5 KG blocks. We produce high quality coco peat blocks with International standards. We understand the price strategy in world market and would like to export for reasonable price. Please get in touch with us for your order. COCO PEAT BLOCK DETAILS : Block weight - 5Kg Block Dimensions - 30 x 30 x 10 Moisture % 10-18 Low EC PH 5.8-6.8 Expansion to a Minimum 60-70 litres Thanks for reading, Varatha...

Manufacturer of synthetic fibers for reinforcing concrete...

...Fibreplast Factory is a producer of polypropylene fibers, CF and BCF yarns, as well as macro and micro dispersed reinforcement for concrete. We offer: - CF and BCF yarn - available in various colors with a thickness of 4 - 30 dtex; - polypropylene fibers - available in various colors with a thickness of 4 - 30 dtex and cutting lengths of 2 - 180 mm; - macro and micro reinforcement for concrete available in any length ranging from 2 to 90 mm. We can customize the color, thickness, and cutting length to meet the client's needs.