carbon monoxide (co)

Custom gas mixtures of the highest quality All-in-Gas is your competent partner for all things related to test gases. We reliably deliver hundreds of gases in the best and highest quality in the shortest time possible. Are you looking for calibration or test gases and value fast delivery at competitive prices? Then you should buy your test gases online here – at All-in-Gas.com! You can expect a ...

...QAL1 certified and US-EPA approved non-dispersive infrared carbon monoxide analyzer for CO measurements in the range of 0-50 ppm. CO: 0-300 / 6000 ppb CO2: 0-20 % Technology: Dilution Sample line: Unheated polytube Backflush function: Yes Calibration gas input: Yes...

...The NDIR bundle CO developed by Micro-Hybrid consists of perfectly matched infrared components for gas analysis of carbon monoxide. A NAC-based IR source with reflector of the JSIR 350 series is combined with the highly sensitive thermopile dual detector of the MTS 200 series. The optical filter of the dual detector is adjusted to the typical wavelength range of carbon monoxide: CWL: 4650 ± 40 nm...

...The KANE77 is used to monitor carbon monoxide (CO) in residential and commercial living spaces, storage warehouses, combustion engine service centers, public equipment, and other indoor locations where people may work or live. The functionality and compact design of the KANE77 allow for easy use in almost any typical work environment. It is not designed for use in areas designated as "confined spaces," where other toxic gases may be present, or in areas where intrinsic safety products are required.

...CO is an odorless, tasteless, and colorless gas that forms from the incomplete combustion of carbon compounds. When it infiltrates a living space, it can lead to hypoxia, loss of consciousness, and even death (after 4 to 5 hours of exposure at 2000 ppm, after 20 minutes at 5000 ppm). CO binds to red blood cells to form carboxyhemoglobin, thereby blocking oxygen transport in the body. REF:DCO2201...

...Designed to test the functionality of carbon monoxide detectors. Supplied in a kit with application sleeves that prevent unwanted dispersion of the test aerosol outside the detector's space. The aerosol content is sufficient for approximately 50 test doses. Contents of the set: Test aerosol CO 1x Insulating sleeve 5x Instruction manual...

...compact and affordable for measuring the carbon monoxide content in indoor air...

...Formula CO SQ 99,5 % Quality 2.5...

...The product is staole under normal conditicns. Avoid heat, flames, sparks and other sources of ignition. Minimize contact with material. Containers may rupture or explode if exposed to heat. Incompatibility with Other Materials: Oxidizing agents. .Hazardous Decomposition Products: Carbon monoxide. Carbon dioxide (C02I. Hazardous Polymerization: Will not occur.Specification. R600a can not De used...

...Gas Detection Systems use Interference Bandpass Filters to identify the emission of a type of gas. Different gases emit at a specific wavelength which makes it identifiable when using a relevant Interference Bandpass Filter. These wavelengths are: Carbon Monoxide (CO) @ 4.73μm Nitric Oxide (NO) @ 5.24μm Nitrogen Dioxide (NO₂) @ 6.17μm Sulphur Dioxide (SO₂) @ 7.42μm Hydrogen Chloride...

... significantly lower nitrogen oxide (NOx), carbon monoxide (CO) and particulate matter (PM) emissions. Skid is external to the container and the gas ancillary module (GAM) is stacked on top to greatly reduce footprint. Extensive fleet of transformers allows for operation at low voltages up to 33 kV. Can accept a wide range of gas supply pressures with supporting ancillary equipment. Can be run with natural...

...Fireplace insert UNIFLAM 600 PLUS ECO ref. The 907-597 is an eco-friendly device. Meets the requirements of Ecodesign and the German standard BImSchV2. - nominal power: 8 kW - efficiency: 76% - average emission of carbon monoxide (CO): 0.10% - average flue gas temperature: 319 °C - max. length of wood logs: 47 cm - flue gas outlet diameter: 150 mm - weight: 89 kg producer :Uniflam weight [kg] :89.0000...

...The MF-CO type sensors are used for measuring toxic carbon monoxide in underground garages, parking facilities, and loading halls. Measurement gas: Carbon monoxide Signal transmission: Analog measurement signal, 4-20mA Connection technology: 24V DC (+), 4-20mA (GND) Calibration: All controls on the sensor, manual adjustment of zero point and gain directly on the sensor possible, microprocessor-controlled sensor calibration Signal generation: Via electrochemical measuring cell...

...DAACO: CO Detector The carbon monoxide detector is certified to the current European standard CE EN50291:2001. Brand: AngelEye Reference: DAACO...

... μm, carbon dioxide, carbon monoxide, hydrocarbons and nitrous oxide can be reliably detected up to the ppm range with this new sensor platform. Applications Environmental and Process Measurement Technology (CEM) Engine development TOC analyzers Elemental analysis Industrial gas analysis Natural gas/biogas analysis Process measurement technology Biogas research Measuring accuracy:±2 % F.S Sensor sample cell:aluminium/gold High dynamic range, 1:100 Targetgas:CO2, CO, CH4, N2O, SF6, N2O Interface:RS232, CANbus, MODBUS, Analog Measurement Range:10ppm - 1 Vol.%...

...and carbon monoxide alarms into one cohesive system for complete home and business security. SMART ALARM SYSTEMS SUNDERLAND Smart alarm systems provide Sunderland residents with advanced remote control, voice command compatibility, and real-time notifications. These systems integrate with other smart devices, allowing convenient security management from anywhere. HOME SECURITY ALARMS SUNDERLAND...

... nitrogen oxide (NOx), carbon monoxide (CO), and particulate matter (PM) emissions. Both the generator and the skid are housed in a space-saving 6m ISO container. Can be operated with natural gas, biogas, coal seam gas, shale gas, and well gas. Extensive transformer inventory available for operation at low voltages up to 33 kV. ELECTRICITY: 1120 kW at 100% continuous power FUEL TYPE: Gas SOUND PRESSURE LEVEL: 1120 kW at 100% continuous power HEIGHT (M): 5.30 LENGTH (M): 6.06 WIDTH (M): 2.44 WEIGHT (KG): 20650...

...Advantages • The gases from the purified air by BAUER cartridges comply with the limit values of the DIN EN 12021 standard. › Oil: less than 0.1 mg/m3 (maximum limit according to DIN EN 12021 = max 0.5 mg/m3) › Carbon Monoxide (CO): less than 5 ml/m3 (ppm) › Humidity: ≤ 10 mg/m3 • Above-average lifespan for all cartridges. • Vacuum packaging for a longer shelf life.

...The Inosent Compact product line is the ideal solution for underground garages. The control center features up to 32 sensor inputs for monitoring carbon monoxide (CO) and nitrogen dioxide (NO2). Additionally, the Compact product line activates ventilation in case of excessive exhaust gas concentrations. If the optionally available humidity sensors are connected, the integrated humidity program can measure the absolute humidity both indoors and outdoors, allowing for further regulation of ventilation in case of high humidity.

... Significantly lower emissions of nitrogen oxides (NOx), carbon monoxide (CO), and particulate matter (PM). Both the generator and the drag slider are housed in a space-saving 6 m ISO container. It can operate on natural gas, biogas, coal bed gas, shale gas, and wellhead gas. A wide fleet of transformers is available to operate at low voltages up to 33 kV. Auxiliary support equipment accommodates a wide range of gas supply pressures. ELECTRIC: 310 kW at 100% continuous supply FUEL TYPE: Gas SOUND PRESSURE LEVEL: 72.1 dBA HEIGHT (M): 2.60 LENGTH (M): 6.06 WIDTH (M): 2.44 WEIGHT (KG): 11700...

...The AtmoSense™ is a flexible process analyzer designed to provide real-time measurements of process gas variables in a wide variety of atmosphere control applications. The AtmoSense™ is available with a range of sensors and options to provide accurate measurement of either dew point, relative humidity(%RH), methane(CH4), propane(C3H8), hydrogen(H2), carbon monoxide(CO), or carbon dioxide(CO2). Choose NEMA enclosure for permanent mount or pelican case with battery for portable use.

... (Methane, Biogas, Natural Gas, Solvents, Liquefied Gases, ...) FLIR GFx320: ATEX certified: Hydrocarbons (Methane, Biogas, Natural Gas, Solvents, Liquefied Gases, ...) G300a: Fixed installed camera heads for various gases - including Methane, Butane, Propane, ... GF346: Carbon Monoxide CO, Bromides, Chlorides, GF306: SF6, Ammonia, Olefins GF343: Carbon Dioxide CO2 GF304: CFCs, HFCs (R134a, R22...

...), carbon monoxide (CO), and particulate matter. A wide range of transformers that enable low voltage up to 33 kV. Suitable for gas supply with various pressure levels along with supporting equipment. Operates on natural gas, biogas, LNG, and shale gas, APG. Turbo drive, highly usable engines with aftercooling for continuous operation under heavy conditions. You will be supported by a highly...

... Display:Illuminated LCD Display pump:Diaphragm pump, flow rate adjustable and monitored Sensitivity:1 ppm Measuring ranges:1ppm - 2.2 vol.%, 100% LEL, 0-100 vol.% CO2 + CH4, 0 to 500ppm CO Sensor :Semiconductor sensor, Infrared CH4 and / or CO2, Electrochemical sensors Gas Types:Natural gas, carbon dioxide, carbon monoxide, oxygen, hydrogen sulphide Protection class:IP 54 Ex protection:EEX ib d...

... oxides (NOx), carbon monoxide (CO), and particulate matter (PM). The generator and skid are both housed within a 20-foot ISO container, saving space. They operate on natural gas, biogas, coal gas, shale gas, and wellhead gas. The extensive fleet of available transformers allows operation at low voltages up to 33 kV. Supporting complementary equipment enables operation. ELECTRICAL: 310 kW at 100% continuous power FUEL TYPE: Gas SOUND PRESSURE: 72.1 dBA HEIGHT (M): 2.60 LENGTH (M): 6.06 WEIGHT (KG): 11700 WIDTH (M): 2.44...

... you can choose between filter types as follows: Type A: colour code: brown Organic vapour or gas with boiling point above 65°C Type AX: colour code: brown Organic vapour or gas with boiling point under 65°C Type B: colour code: grey Inorganic vapour or gas (no CO) Type E: colour code: yellow Sulphur dioxide and acid gases or vapour Type K: colour code: green Ammonia and ammonia derivates Type Hg: colour code: red Mercury vapour Type CO: colour code: black Carbon monoxide Type P: colour code: white Dust Breathing filters, depending on filter type, can remove certain pollutants from...

... required. Sensor technology Electrochemical sensors can be designed to be very selective and sensitive at the same time by the right material choice for electrodes and electrolyte. These sensors will not respond to less dangerous substances that might be around in the plant such as hydrocarbons, carbon monoxide, hydrogen or even humidity. A detection limit of Phosgene as low as 2 ppb is no problem for...

... Brand 5.0(HP) 99,999% Oxygen O2 ⩽1.0 ppmv Nitrogen N2 ⩽1.0 ppmv Hydrogen H2 ⩽1.0 ppmv Helium He ⩽2.0 ppmv Carbon monoxide + Carbon dioxide CO+CO2 ⩽1.0 ppmv Methane CH4 ⩽1.0 ppmv Moisture H2O ⩽1.0 ppmv Brand 6.0(UHP) 99,9999% Oxygen O2 ⩽0.1 ppmv Nitrogen N2 ⩽0.2 ppmv Hydrogen H2 ⩽0.1 ppmv Helium He ⩽0.1 ppmv Carbon monoxide + Carbon dioxide CO+CO2 ⩽0.1 ppmv Methane CH4 ⩽0.1 ppmv Moisture H2O ⩽0.1 ppmv ...

...• Automatic shock test and calibration station (accessory) • Leak detection from PPM to volumetric gas with ultra-fast PPM response The GT series is designed for the gas industry and meets all the requirements of maintenance technicians in a single unit. The seven operating modes include: leak tests, entry into confined spaces, borehole tests, carbon monoxide, cleaning, leak sniffing, and...