... roots blower generally consists of an Inspection, Repair/Modification and a final Report.
Inspection
The first step when repairing a blower is the inspection. Blower inspections include:
Visual inspection
Measuring axial and radial clearances
Measuring of backlash
Disassembly + visual inspection of parts
Dimensional measurements
Blueprint
Oil sampling & check
When the inspection is finished, an inspection report is drawn up with recommendations for repair.
...
... to your drawing.
The most suitable method of extruding the rubber profile is determined based on the production volume. After the vulcanization of the profile, we manufacture a precise radial or rectangular corner with a clean transition between the rubber profiles. We can deliver products in small quantities or with continuously high volumes.
...This standard tank from our stock has been equipped with an electric 16 kW tracing system to raise a product from 15 °C to 80 °C in 2.5 hours.
Insulation and a bolted decorative plate have been added around the tracing. We can also offer welded decorative plates.
A 4 kW agitator has also been installed on the tank, featuring an axial/radial Alabnet impeller and a halbanker in combination with 3 x deflector plates.
...BIG 800 MAGGI Radial Saw
CE
Prepared for dust extraction
Motor brake with circuit breaker
Noise-reducing blade cover
Cast iron arm and base
8 bearings
PRODUCT CODE 15541120
Three-phase motor power 4 HP 3 kW
Single-phase motor power 3 HP 2.2 kW
Motor speed 2800 r.p.m.
Blade diameter Ø 350 mm
Bore diameter Ø 30 mm
Shaft dimensions Ø 25x80 mm
Dust extraction hole on hood Ø 60 mm
Dust extraction...
... residence time
Modular design
Radial MultiFuel Burner
The Radial MultiFuel Burners are equipped with a vortex control valve which enables manual control over the amount of turbulence and rotation that is given to the combustion air and the fuel/waste mixture.
1 to 20 MW capacity
Control valve to control vortex and turbulence of the flame
Shorter flame profile
Suitable for standard fuels as well as...
... bodies with hard coating
Easy adjustment and short length thanks to setting valves arranged at right angels
High safety against gas back-flow and excess gas flow through sealing the units in the handle with radial sealing rings
Scope of supply:
Handles
Inserts for spot heating or surface heating, lengths up to 930 mm
Flame scarfing insert to 250 mm flame width
Accessories, consumable parts...
...Duquesne Profit 110 Tire Changer
Designed and manufactured in Belgium!
tire machine with effective bead breaker featuring linear movement and telescopic pre-setting of the pressure plate
perfect clamping — from the outside — of all wheels from 10" to 23" through the radial movement of the four soft jaws
easy dismounting of low-profile tires or runflats thanks to the combined use of the RF arm
smooth mounting of the stiffest tires thanks to the combined use of the RF arm and the "three-prong".
...The main technical characteristics:
- Thicker plates
- Plate grid with radial geometry
- Active material with a specific composition to absorb cyclic loads
- Grids with Pb/Sb/Sn/As/Se alloy that improves corrosion resistance and allows optimal contact between the active material
- Micro-porous rubber separators combined with fiberglass mats to counteract the loss of active material. Thanks to...
... galvanized steel rail suitable for the suspension rollers. Adjustable rod supports are provided every ± 800mm. The radial load capacity is 400Kg per roller. The fixation of these supports is ensured by a steel angle of 100x100x10 with expandable steel bolts. These bolts are anchored in a concrete lintel. A built-in end stop in the guide rail is provided at each end of the rail. A hydraulic damper allows for speed control during closing. It features fine flow adjustment to control this speed.
...
Refrigerant/quantity (kg): R407C/0.7
Compressor: Rotary
Fan: Radial
Noise level at 1 meter (dB(A)): 46 (model T 43)
Specific energy consumption (SEC) at 28°C & 60% HR: 0.47
Weight (kg): 56.5
Filter: G3 - PPI 15
HxLxP (mm): 770x1010x326
Protection class: IPX4
Protection class according to EN/ISO 12944-2 standard: C4...
...2V cells from 150Ah to 3000Ah.
Advantages
18 years Design Life
Up to 1500 deep discharge cycles
99%+ gas recombination efficiency
Maximum charging efficiency
Improved safety against accidental contacts
Easy installation: vertical or horizontal
Positive plates:Tubular plate with lead-tin-calcium grid alloy
Negative plates:Flat pasted plate with lead-calcium grid alloy (radial design...
MTG chose to specialize in the sale of CNC-controlled metalworking machines, with a strong emphasis on service and quality. Year after year, the company grew and has been a significant player in the metal sector for several years now. They supply machines and tools such as lathes, drilling machines, milling machines, machining centers, bed milling machines, slotting machines, collet lathes, dividing heads, drilling machines, dividing heads, radial drilling machines, saws, tapping arms, and grinding machines.
...milling machines, boring machines, radial drills, surface grinders, metal saws, sandblasting booths, industrial washers, ultrasonic cleaning, a testing bench, and a pit for testing submerged pumps. We offer a very wide range of centrifugal pumps.